Invisible braces - correction of occlusion is imperceptible to others

Special braces are used to correct bite defects. These products allow to correct violations of occlusion and curvature of dental units.

However, many people do not hurry to use braces, because they can also spoil the look, especially if they are made of metal.

But now braces are produced with an invisible design. The presence of such an orthodontic article in the mouth is difficult to detect, even if you look closely from a close state. So why are they considered invisible? What is special about these products?

Pros and cons of orthodontic invisible objects

Invisible braces are necessary to eliminate bite abnormalities, curvature and roughness of the dentition,but they should be as visually as possible. Usually such products are used by adults, whose professional activities are associated with frequent meetings and popular personalities( models, actors, politicians and so on).

Positive qualities of invisible corrective constructions:

• the main pluses come out of their destination - the braces are completely invisible;
• usually these products are small in size and do not affect the appearance of a person;
• after a full period of treatment there are no signs of their use, there are no different disruptions on the tooth surface;
• have a hypoallergenic basis, so all components of the structure include components that do not cause allergic reactions and are suitable for each patient;
• invisible products can correct deep bite defects no less effectively than classic ligature;
• due to the fact that the locks have a round, high-quality processed form, there is no trauma to the tongue;
• fast addictive - in a week the patient will not feel any discomfort and inconvenience when using the design.

However, there are several drawbacks:

• when wearing imperceptible brackets can cause problems with diction, but this problem will disappear quickly enough;
• have a fairly complex installation, hence the rascal who installs these structures must have the professionalism and experience;
• high cost of products.

What does orthodontics offer?

Braces that will not be visible to others, are of the following types:

• lingual;
• sapphire;
• plastic;
• white;
• ceramic.

Each of these types of structures has certain distinctive features that must be carefully studied before installing them.

Structures for fixing from the inside of the tooth row

Lingual invisible braces have a translation from the Latin lingua - language. This kind of orthodontic systems, in contrast to standard corrective devices, are installed on the inside of the dentition. For this reason, they are not visible to the surrounding people.

Positive qualities:

• because the braces system is installed on the back of the dentition, it can not be seen visually;
• does not cause discomfort or discomfort to the patient when worn;
• there are no age restrictions, such designs can be used by people from 13 years to 60 years;
• does not cause destructive processes on the teeth and inflammatory processes in the gum area.

But there are also negative sides:

• high cost, on average, a complete set with the installation can cost from 100 to 150 thousand rubles;
• severe dental cleansing;
• during the first time of wearing may occur violations of diction.

Lingual braces Incognito

These products are produced long enough because they have a complex design. They must fully correspond to the patient's dentition and fit into its dimensions. On average, the manufacturing process takes up to 1 month.

Installation features:

• installation is quite complicated, because the doctor has to work in reduced visibility;
• first cleanses the oral cavity, sanitation is performed, all infections and diseases are eliminated;
• further makes an impression, on the basis of which the bracket-system is made:
• first of all braces are installed on the surface of the teeth;
• further on the plates are installed special locks;
• , the arc is fixed at the end;
• the entire structure is stretched by the staples and the arc, so at first the patient may experience unpleasant sensations.

Ceramic products

Ceramic braces in comparison with lingual are not of such a high cost. For this reason, it is quite a popular option among invisible products for correcting bite defects. Ceramic material is used for manufacturing, which completely repeats the color of teeth.

In addition, these braces have a number of positive qualities:

• , these systems do not cause friction and do not irritate the gums;
• have the same structure with teeth, they do not darken even with a long period of wearing;
• the price of such products is higher than that of classic corrective products, but lower than that of lingual ones;
• convenient application, because such products do not cause difficulties in the conversation, do not cause discomfort and rubbing.

The installation of these braces is the same as for classic products. It is desirable that this procedure is carried out by an experienced doctor who has high professionalism.

Stages of installation:

• first of all the doctor examines the oral cavity, makes a roentgenogram of the dentition;
• further sanitation of the oral cavity is carried out, carious lesions, inflammatory processes in the gum area are eliminated;
• is then made an impression of the dentition from gypsum, on the basis of which the manufacturing of the bracket system is made;
• further plates on the surface of the front dentition are fixed, which are fixed by an arc and staples.

At the first time after installation, the patient may experience unpleasant sensations, discomfort, but it will be in a few weeks. The average cost of these products is 70-80 thousand rubles.

Sapphire invisible braces

Sapphire products appeared recently, but have already become quite popular and in demand among many patients.

These braces can eliminate not only bite defects, but can also become a stylish enough decoration. The brace stones have crystal clearness, and when light hits them, they immediately begin to pour.

The only element that can show the presence of this design on the teeth is an arc, but it can be painted in the color of the plates themselves. Therefore, their application will not be visible to surrounding people.

Sapphire products are the most modern bracket system, and almost invisible, and have a number of positive qualities:

• they are almost not visible on the teeth, while they give the dentition a fairly attractive appearance;
• have increased strength in comparison with ceramics and plastic;
• when used, there is no problem with the diction;
• when wearing corrective products made of sapphire material there are no unpleasant sensations, pressure on the gums, rubbing;
• they do not injure the mucous membrane of the oral cavity;
• sapphire products allow painless correction of bite disorders, and the period of getting used to them lasts only for a short time.

Despite the fact that sapphire braces have a number of positive qualities, they also have some negative qualities:

1. High cost of .To date, not everyone can afford to install such orthodontic designs. It is impossible to determine the exact cost of these structures. The price of products depends on the clinic, as well as on the individual characteristics of the patient. The approximate cost of the whole construction with the installation is from 80 to 100 thousand rubles.
2. For the first time after installation, invisible sapphire braces can cause unpleasant sensations, discomfort .But these feelings are already a few weeks after installation.

Plastic braces

Another type of invisible orthodontic products are plastic braces, which can have a variety of colors, , which can accurately fit the structure of the tooth tissue.

Adjustment devices made of plastic have a number of positive qualities:

• affordable price - compared to other types of invisible plastic products have a low price;
• almost invisible on the surface of the teeth, you can choose the color of any dentition;
• in the assortment there are colored plates that make correction of bite attractive for children.

In addition to the advantages there are also negative qualities:

1. Low strength .Plastic is a brittle enough material, it can be damaged as a result of various mechanical influences.
2. Long term wearing .Unlike metal structures, these products will have to last much longer.
3. The base can be dyed with various dyes, which are contained in food and beverages.
4. Increased cost due to frequent breakdowns of .Due to the fact that plastic structures often break down, you will often have to see a doctor to install new products, resulting in a greatly increased cost. The average cost of one set is 15 thousand.

Installation is carried out in the same way as other bracket systems.

White construction

White braces are a kind of invisible correcting devices that are made of crystalline material. There are two types:

• monocrystalline;
• polycrystalline.

These systems are designed for people whose professional activities are related to other people. They are invisible on the dentition. Often produced with a white arc, which is also not visually visible. It can be used for children from 13-14 years old and adults up to 60 years.

The period of wearing these products is long - up to 2 years. Also the cost of white brackets can be quite high from 30-40 thousand for a complete set. Installation is carried out as well as other correcting devices.

Theses about the main

All of the above invisible braces are able to cope with both deep and moderate bite disorders. For this reason, the choice of products depends only on the patient's personal preferences, as well as on financial possibilities.

Some dentists can praise and recommend sapphire and ceramic products, they can say that they are able to quickly and painlessly eliminate all bite disorders, but still the best are considered to be lingual constructions.

When worn, they are absolutely invisible, so those around them will not be able to determine their presence. Their cost is quite high, but if your activity is connected with frequent meetings with people, then this option will be the most suitable. If you prefer convenience, then you can use sapphire and ceramic products.

In any case, the selection of products should be done only with the attending physician and the situation. A specialist will help you choose the right system. After installation, he should explain how to take care of these products and about the peculiarities of nutrition.