The usual wadded disks can be used not only for cosmetic purposes, but also as a developing material for preschool and primary school children. With their help, you can create all kinds of applications and crafts, which will be an excellent gift for the New Year, 23 February and 8 March for parents.
- Angel
- Butterfly
- ladybug and bee
- City
- Caterpillar
- Trees
- Herringbone
- Forest
- Animals
- Bunny
- Cat
- Bear
- Lamb
- Panda
- Birds
- Swan
- Rooster
- Bullfinch
- Owl
- Chicken
- Fish
- Snowman
- Flowers
- Callas
- Snowdrops
Angel
In order to make an angel from a cotton disc you will need:
- 2-3 discs;
- white thread;
- adhesive PVA;
- scissors;
- rhinestones and beads.
To begin with, split one cotton pad into 2 halves and collect all the inside of the cotton wool into a ball. It is a ball to lay in the center of one half of the disk, wrap it and tie a thread at the base, so that the head of the angel turns out.
The second half of the disc should be folded twice and wrap it around the tail, left after the formation of the head. The edges of the disk need to be glued. Should get the shroud of an angel in the form of a triangle.
You will need another wadded disk to create the wings. Its edges must first be cut off by a wave, and then the disk itself should be divided in half. The resulting wings are glued to the workpiece.
Additionally two-quarters of the disk can be made for the angel of the handle. Each quarter should be rolled with a cone, and cut the sharp edge at a right angle, so that it would be more convenient to attach the handles to the body.
Stick the pens, and decorate the angel with rhinestones and beads.
to the table of contents ^Butterfly
Only 5 cotton wools and 2 eared sticks will be enough to create a butterfly. On the wings will go 2 whole disk and 2 halves. On the body - 1 disc, cut into 4 equal parts. On the head - 1 disk of smaller diameter. Collect the application in the following order:
- 2 large wings;
- 2 small wings;
- body, beginning with the bottom element;
- horns made of cotton wool;
- head.
If desired, the butterfly can be painted in bright colors.
Ladybug and bee
Quite easily from several wadded disks you can geta bright ladybird or a bee. They are performed in exactly the same way: a small head of paper, a body of a whole disk and wings from the halves. The only difference is that each insect needs to be dyed in distinctive colors.
to the table of contents ^City
To perform the application on the theme "Winter city" it is necessary to prepare in advance:
- cotton wool;
- set of colored paper;
- cardboard in dark color;
- scissors;
- glue PVA;
- pencil.
Of color paper cut a few rectangles - this will be the city houses. Their height can be different, and the width should be approximately equal to the diameter of the wadded disk. Stick the colored blanks onto the cardboard.
Wadded disks cut in half, arranged on the roofs of houses and on the ground in the form of drifts, and glued to cardboard.
From white paper cut small equal rectangles and paste them on houses in the form of windows.
to the table of contents ^Caterpillar
In order to create a bright caterpillar with the child it is necessary to prepare:
- 6 cotton wheels;
- sheet of cardboard;
- inks;
- brush;
- glue PVA;
- scissors.
To begin with, offer the baby to paint cotton pads in different colors. One disc must be cut in the shape of a head with horns and draw a muzzle on it. Then, when all the discs dry, they should be sequentially pasted onto the cardboard. In addition to the application can be glued grass, flowers, sun.
to the table of contents ^Trees
It is quite easy to perform winter tree appliqués using a cotton pad. It is necessary to cut out trunks from colored paper, and the role of snow-covered crowns will be played by wadded disks, which must first be pasted onto a sheet.
To create trees with yellow or green foliage, you should pre-paint the discs in the desired color and glue them on top of the trunk of colored paper.
to the table of contents ^Herringbone
A beautiful application in the form of a New Year tree from cotton discs can even be applied to a child. For operation it will be required:
- 18-20 cotton discs;
- glue PVA;
- brush;
- sheet of cardboard;
- decoration.
Each cotton disk must be glued in the form of a cone, as shown in the photo.
Then, starting with the bottom row, glue all the disks onto the cardboard. In this case, each next row should be less than the previous one. In conclusion, you need to "decorate" herringbone decorations.
to the table of contents ^Forest
If you cut out small Christmas trees from cotton wool discs and paste them on cardboard, you get a winter forest.
to the table of contents ^Animals
to the table of contents ^Bunny
You can get a cute little rabbit from 2-3 cotton discs. To perform the application you need a sheet of cardboard, glue, a small bow and small pieces of black, red and pink fabric for the design of the face. On the cardboard, you can first draw a forest landscape or a snowy surface.
The head and hare body can be made from 1 whole disk, simply dividing it into 2 halves. And paws, ears, cheeks and tail have to be cut. Every detail is easier to make in one copy, and then split the disk in half. So, the corresponding parts will have the same size and shape.
Before starting the creation of the hare figurine, it is necessary to arrange all the blanks on the sheet and consider the sequence of gluing the parts, and then take on the glue.
to the table of contents ^Cat
Only 5 cotton blades are needed to create an appliqué in the form of a kitten. In addition, you should prepare a sheet of cardboard, scissors, glue, a button for the nose and toy eyes.
First on the cardboard you need to glue 2 discs - this will be the head and body of the kitten. From the halves of the disc you need to make paws. Then, cut the edge of the disc in a circle and adjust it along the length - this will be the tail. Next cut out triangular ears and long mustache. All parts together with a button and eyes to paste on the face.
to the table of contents ^Bear
A similar bear can be made by preschool children themselves. Parents should prepare a sheet of cardboard, cotton pads, colored paper or special stickers, glue, scissors and beads.
The body of a bear can be made from a disk of large diameter, and the stomach - from a disk with a smaller diameter. The remaining parts( head, paws, ears) should be cut proportionally. All the components of the figure are pasted onto the cardboard as shown in the photo. Eyes and a nose to execute from a black bead, a mouth - to draw a felt-tip pen. From the colored paper cut out clouds, sun, grass and flowers, and decorate them with applique.
to the table of contents ^Lamb
To create a lamb, you need:
- 12 wool discs;
- colored paper;
- markers;
- glue PVA;
- scissors.
To obtain the head of a lamb, one disc must be cut in the shape of an oval and painted on it with the muzzle of the animal in profile. From the paper cut 4 legs and eyelet. Stick all the details as shown in the photo.
to the table of contents ^Panda
A small panda can be made from 2 halves of a single wadded disk. They need to be glued on top of each other. The rest of the items( paws, breast, eyes, nose and ears) must be cut from black paper, and the mouth - from a piece of red.
to the table of contents ^Birds
to the table of contents ^Swan
A graceful white swan will come out of only 10 woolen disks. In addition, you need to cut out a long curved neck and a beak from the paper. All the elements are pasted onto the cardboard as shown in the photo. Use paint or a marker to draw feathers and eyes.
to the table of contents ^Rooster
It's quite easy to make an application with a cock image, you need 5 cotton discs. Start with the tail - 3 halves of discs stick glued together.
In the center of the application, to the left of the tail, it is necessary to place a disc that will become the body of a cock. Then stick a smaller diameter head and decorate it with a wavy scallop, beak and eyes. From the leftovers make paws.
to the table of contents ^Bullfinch
To perform an applique depicting a red-breasted bullfinch on a snow-covered branch, it is necessary to pre-color 1 wool disc in red and 2 - in black. Cut the branch from brown paper and paste it on the sheet. At the ends of the branch, apply a little glue of PVA and attach the cotton wool.
Bullfinch sit in the center of the composition, pasting first the red body, and then the head, wing and tail. Beak and paws cut out of yellow paper.
to the table of contents ^Owl
Only 3-4 cotton wools are needed to create a night owl. The head and body of the bird are made from solid discs, the wings are made of halves. All elements need to be slightly incised at the edges. This is to add a bakery texture.
It is a problem for a child in this application to make eyebrows, as the details are small and require precise cutting, at this stage it can be helped. Eyes, beak, as well as other decorating items( stars, moon, branches) should be cut from colored paper. It is better to use dark-colored cardboard as the basis for the application.
to table of contents ^Chicken
In order to create an application with bright chickens, you must first color the cotton wool discs in yellow. There will be as many discs as there are chicks. After drying, the discs should be glued onto a cardboard sheet in random order and they should be finished with legs, eyes, scallops, beaks and wings.
If desired, you can paste sunflower seeds or millet onto the cardboard, and also make eggshells from a white disc.
to the table of contents ^Fish
Ask the baby to paint 4 cotton discs in blue or green. After drying out of 2 disks, you need to cut out the triangles, so that the fish tail resembles a fish tail. On the basis to paste 2 whole discs, and next to them to attach the tail. From plasticine or colored paper to make eyes and the rest of the aquarium decoration.
to the table of contents ^Snowman
The easiest piece of artwork. For it, you only need to glue 2-3 white cotton-wool discs on the base and the snowman is ready. If desired, it can be decorated with a scarf and a cap made of colored paper. The muzzle and hands can be drawn with a marker.
to the table of contents ^Flowers
Using cotton pads, you can create completely different types of colors. It all depends on the imagination and the amount of source material.
Calla
Basket with elegant callas can be a wonderful gift to March 8.First you need to cut out a cart from the cardboard, and leaves from green paper. Then paint the tips of the cotton buds in yellow. Screw each stick into a cotton pad, as shown in the picture, and glue it to the base. Place the fastening decorate with green leaves.
to the table of contents ^Snowdrops
On the blank of blue cardboard draw the green stems of the snowdrops. From cotton pads cut out buds of different sizes and paste on the tips of the stems. Place the joint with a green marker. From the halves of the discs can make drifts.