How to tie mittens with knitting needles for beginners step by step: charts and description. How to calculate loops, tie a finger, an elastic band on a mitten with knitting needles, how to reduce and end a mitten?

How to tie mittens with knitting needles in different techniques and with different patterns for every taste and color.

Knitted mittens from mom or grandmother were in childhood almost everyone. Many people, mostly women, after a lapse of years themselves learn to knit warm mittens to their children, relatives, or to themselves. It is much more pleasant to have in your wardrobe a thing made by yourself or with the caring hands of your loved ones.

Mitten - a symbol of warmth and comfort

How to learn to knit mittens with knitting needles?

To be able to knit something yourself is a very good and useful skill. You never know when you want a new scarf, gloves, socks or mittens. There are always people who love to create something with their own hands, buying finished products in stores for them is not interesting. It is these people who create stunning masterpieces with their beauty.

Mittens can also be beautiful and stylish. If you are knitting yourself, then in the right to solve absolutely everything that concerns the model, independently. And about how to start and how to learn to knit, we'll write in this article.

Mittens - this is what no winter

does without. Step 1. You need to learn on quality materials, so choose the most comfortable knitting needles for yourself. They can be made of metal, bamboo, bone, plastic. As a rule, choose spokes made of metal, because they provide the desired slip of the thread. And metal knitting needles do not catch yarn, which is very convenient.

for each yarn you need your needles

Step 2. Choose good yarn. It all depends on what you want to relate to and your initial skill. If you hold the knitting needles for the first time in your life, then keep in mind that it will be difficult for you to work with threads that stretch or do not stretch at all. Usually, in such cases, the threads are semi-woolen, they are quite elastic, and the finished products of them are well-shaped. Beginners are also not recommended to work with threads that go to three or more additions - a large number of puffs you are provided.

Variety of yarn for knitting

Step 3. Decide on the knitting technique and the pattern. It is best to start with the basics: a set of loops, facial loops, purl. Further more. Learn to knit with different techniques. Learn the rules of knitting braids, patterns, rubber bands and other elements.

Step 4. Set of loops is the very beginning of knitting. If you make a mistake at this stage, then, most likely, to embody your idea of ​​knitting the product will not work. To correctly type the first row of loops, use the diagram below.

Set of the first row of loops, the

scheme Step 5. Now you need to master the technique of the facial smoothness. This is the basis of the fundamentals in knitting.

Diagram of knitting of the front loops

Step 6 .After you understand the technique of knitting the facial loops, proceed to study the back of the technique. They are not much different from each other, but they both need to master masterfully.

Knitting Pattern with Purl Loops

These were the most basic knowledge that a person who wants to knit beautiful things in the future should possess. Master them, and only then proceed to make a complete product.

Calculation of knitting loops for knitting needles

First of all you need to determine the size of your hand - calculate the length of your wrist, hand, fingers. If you incorrectly calculate all the dimensions, then the product will turn out to be unpretentious, crooked, so pay special attention to this step.

Detailed instructions for determining the correct size of mittens are already on our website.

After all the measurements are done, proceed to knitting the sample. This will be necessary in order to correctly calculate the number of loops.

correctly taken measurements will greatly simplify the work of

. The control sample is ready. Now attach a ruler to it and count the number of loops at 1 cm. Multiply this number by the length from the wrist to the wrist that you considered earlier. The last number obtained is divided by the smallest integer multiple of 4. For example, you got the multiplication of the number of loops by 1 cm by the length of the brush to the wrist number 54. The nearest integer that will be divisible by 4 without a remainder is 52. It andwe take.

This is how the number of mittens is calculated.

After this, build the scheme according to the measurements already taken. The pattern will serve as a kind of guide for you.

with the help of this scheme make two patterns

The base part is ready. You have decided on the size, patterns, patterns, color and texture of yarn and knitting needles. Now read the rules of knitting mittens on 3, 4 and 5 spokes.

Mittens with 5 spokes for beginners, detailed description

Knitting mittens on 5 spokes means circular knitting. The main "frame" is held on 4 spokes, and the needle at number 5 all is tied.

First of all, cuffs are made. The length of the cuff is equal to the length of the circumference of your wrist. The cuff is knitted according to the gum principle. One face and one purl loops, or two face and two purlins.

For more convenience, number the needles as shown in the picture

How to knit a mitten on 5 spokes:

1. First cuffs are knit. The number of loops is defined as shown above.
2. For two needles, type the desired number of loops.
3. Divide the number of loops into 4 equal parts and insert one piece of hinge on each spoke( 4 in total).
4. Close a series of loops into the circle by tying the ends of the thread together.
5. The height of the cuffs is from 5 to 7 cm, bind as much as you need.
6. Now that the cuffs are finished, start knitting the main part. Begin by adding one loop on each spoke. That is, at a certain moment you have two loops from one loop.
7. At this rate, tie as many centimeters as you indicated earlier in the measurements.

The cuffs are ready.

mittens with cuffs

Now start knitting your thumb. The thumb for the right hand is located on the third spoke, for the left hand - on the fourth.

1. Now proceed directly to tying the hole for the finger. On each spoke you have a certain equal number of loops. For example, 12. Then tie the first loop on the third spoke, then the next 10 zakolite pin.
2. Put 10 air loops on the right knitting needle( the number of such loops is equal to the number of loops you take on the pin) and tie the final twelfth loop.
3. Continue knitting in a circle to the height of the little finger.
4. Now start to reduce the number of links in this way: on the first and third spokes, tie two loops( at the beginning) with a flip, and in the end on the second and fourth spokes, two joint loops for the upper lobes.
5. Reduce the number of links on each spoke through the row until at least half of the loops of the original quantity remain on each of the spokes. From now on, decrease the number of loops in each row.
6. The last 8 loops are in the ring and tighten from the wrong side.

To the next stage your mittens should be almost ready, as shown in the photo

1. Now start tying your thumb. Those loops, which were removed in the 9th step on the pin, translate into a spoke.
2. When on the 10th step you looped the air loops, edge bands formed. From them, type new loops, the number of which must be divisible by 3.
3. Distribute the loops along three tools( knitting needles) and knit in a circle almost to the end of the nail. Using the technique shown in step 12, start making a decrease.
4. The last 6 loops gather in a circle and tie it from the wrong side.

As a result, you should get mittens such as those on the photo

Mittens on 4 spokes for beginners, a detailed description of

When they say knitting mittens on four spokes, it is often assumed that there are 4 knitting needles on the canvas and one working knitting. Therefore, if you want to tie mittens on 4 spokes - pay your attention to the previous paragraph in the article called "Mittens with 5 spokes for beginners, a detailed description."Most likely, it is in it that you find what you are looking for.

Mittens connected on 4 spokes, look like this during the process

Mitten on 3 spokes for beginners, detailed description

Mittens on three spokes knit very rarely, and most often it's children's mittens. This choice is connected with the fact that the wrist of the child is much narrower than the wrist of an adult person, so there is no point in an additional fourth spoke.

So, to tie the mittens on three spokes?

1. Type the desired number of loops( according to the table above) into two spokes.
2. Distribute them to 3 in equal numbers. Begin to knit an elastic band 1 to 1( one is a wrong loop, one is a front one).
3. Add other colors, if necessary, without interrupting the previous thread.
4. Tie the rubber band in this way to the end.
5. Start increasing the loops according to the scheme described earlier in the article.
6. If there is a picture - at this stage you should start to unbind it. Do not forget to leave a hole under your thumb.
7. After the end of the drawing, tie it to the tip of the little finger, if necessary. If not - begin to reduce the number of loops according to the scheme described above. Also finish knitting.
8. Tie the thumb in the usual way, from the underside, secure the end.

You can use any pattern. For example, such as in the picture below.

Pattern for mittens

This pattern produces such interesting mittens.

Inside

Outside

Mittens for beginners on two spokes, detailed description

Mittens on two spokes are very easy to knit. This technique is suitable even for beginners. Its essence lies in the fact that the inner and back sides of the mitt are knit separately, which are subsequently fastened with a needle or a hook.

Important! Do not forget to measure the volumes of your brush before starting to knit, as shown in the article from our website.

Mittens on two spokes

For the back side:

1. Dial two knitting needles for the mittens( half as much).How to find out the exact amount that will be used is described earlier in the article.
2. It is obligatory on each side to type one loop in addition. They are useful for stitching at the very end.
3. Tie a rubber band, 7-8 cm long.
4. Follow the selected technique( figure) to continue knitting to the tip of the little finger.
5. After this, start decreasing the number of loops as shown earlier in the article( link two loops to one).

For the inner side:

1. Do all the same work that you did with the first half, but only until the end of the gum. Then the scheme will change.
2. Now 3 quarters of all loops are typed on a pin.
3. On the remaining loops on the spokes, get the same number of loops that were removed. Of these, a rectangular shaped element is tied-the future thumb.
4. Those loops that remained on the pin, tie a smooth cloth to the little finger.
5. Next comes the decrease in the standard scheme.
6. Two sides are ready. Now you need to sew them from the wrong side with a conventional needle and thread.
7. Mittens are ready.

Simple mittens on two spokes with patterns

How to tie an elastic band to mittens

An elastic band or cuff is the name of that part of the mitten that fits snugly against the wrist and reaches the wrist. The elastic is needed, first of all, for better fixation of the mittens on the arm. It is thanks to the cuff that the mittens do not fall off at the first stroke of the hand.

You do not need to make mittens with an elastic band. But otherwise, be prepared for the fact that the product will quickly stretch and lose its "commodity" look.

Mitten with an elastic band and a pattern

Several variants of knitting of a gum for mittens, we have already cited in this article, nevertheless we will cite more.

Scheme 1

Scheme 2

Scheme 3

In case you want to make a beautiful rubber band, but time or skills to weave patterns you do not have, you can apply a tricky technique - you can sew a fur on the elastic band. Then the mittens will look completely different.

Mitten with fur band

How to tie a finger mittens with knitting needles for beginners?

The finger on the mitten is always tied separately from the main product, or returned to it when all the main work is finished.

In this part of the gloves, take special care if you tie the ideal brush, but make mistakes in knitting your finger - the product will have to be re-tied.

So the finger is knitted on the mitten

The thumb can be knit with or without a wedge. Mittens, in which the thumb is made with a wedge, look neater than those mittens whose thumb is made without a wedge.

Knitting Pattern for Mittens with Wedge.

Scheme 1

Knitting pattern of a thumb without a wedge.

Scheme 2

This is how mittens look in which thumbs are made with wedges.

Mitten with braids

How to reduce and end the mitten with knitting needles?

There are several ways to finish knitting mittens. In this article we have revealed only one. Therefore, further on, we will tell you more about some methods that you might like more.

Method number 1. To make the toe off of the gloves go round, the decrements are made only at the end and in the middle of each of the spokes. The last loops are gathered in a ring and tightened from the inside.

Method number 2. On the first and third spokes, each 2 first loops are tied with a tumbler, pulling one loop through the second. And on even( 2, 4) spokes together, in the usual way, only the last two loops are sewn.

hinge loops

How to close the hinges on mittens with knitting needles?

Mitten with knitting needles for beginners

Mitten, made in the technique of garter stitching, always consists of two halves - the outer and inner sides. Therefore, any mittens on two spokes can be made in this technique.

Now we will tell you how to tie such mittens.

Part 1

Part 2

Part 3

Mitten in a handkerchief

Mittens without fingers with knitting needles for children: a scheme and description

To keep your baby warm - tie his mittens with his own hands. Very small children knit mittens without fingers, so that children's handles do not freeze. In another way such gloves are called scratches.

Mittens without fingers are very easy to knit. Even a beginner will connect such a product without problems in just a few hours.

Mittens without fingers are knitted on 5 spokes already familiar to you.

Open-work mittens-scratches for babies

How to tie gloves without fingers for toddlers without fingers:

1. Dial 2 spokes for 32 loops, spread them over 4 spokes.
2. Bind a small rubber band about 4-5 cm long. Knit by alternating one face and one back loop.
3. Now only the facial loops to bind about 6-8 cm, the hole under the finger do not need.
4. When the main part is finished - start decreasing 1 loop from each side of the knitting needle. To knit so 6 rows.
5. Finish by pulling the hinges in a ring and tying them from the wrong side.

Such gloves can be linked in the scheme above

We offer you several ideas how to tie interesting mittens without a finger for the baby.

Gentle pink scrapes for the girl

Scratchy babies in the nautical themed

Multicolored fashion mittens-scratches

striped scrapes for the girl

How to tie the children's mittens with knitting needles for beginners: a scheme and description

For kids - the best. Therefore, the creation of children's mittens should be approached with creativity.

How to tie mittens with bullfinches for children?

Part 1

Part 2

The end result is cute mittens with knitting needles

Now you'll talk about how to tie the mittens-hedgehogs, which definitely like your child.

Mittens with hedgehogs.

Schematic 1

Schematic 2

Schematic 3

You can get ridiculous hedgehogs according to the scheme above

Simple pattern for mittens with knitting needles for beginners: scheme and description

Simple patterns are usually referred to as braids, plaits and all sorts of lines. To connect such patterns to a beginner, it is sufficient to follow any of the schemes below.

Simple Knitting Patterns

And here is a detailed description of knitting braids for mittens using knitting needles.

Description of knitting braids

Video: How to knit mittens with knitting needles?| |How to knit mittens.