Why the nail polish bubbles: what to do, how to clean and how to avoid? How to choose a good nail polish?

The causes of the appearance of bubbles during the application of lacquer. Ways to avoid the appearance of bubbles.

A beautiful manicure is a business card of a woman. Well-groomed hands always attract attention, so it's better not to apply makeup than not to make a manicure. Of course, without the use of nail polish, the nails do not always look attractive. Modern coatings allow you to align the nail plate and get rid of some disadvantages.

Why does the nail polish come with bubbles?

Often after the application of lacquer, we detect bubbles. This spoils the manicure, making it sloppy. It is better to go with non-painted nails, than to appear in public with such disgrace. Most often in the appearance of bubbles, the woman herself is to blame.

Reasons for the appearance of bubbles:

• Low-quality lacquer. Usually it occurs in very inexpensive means. Manufacturers use solvents as solvents that interact with air, forming bubbles
• Applying too thick a layer. It is necessary to type a few tools on the brush and apply it in several layers. After drying, repeat the staining again. So, there will be no bubbles
• Fatty nail plate. Some solvents react with fat. As a result of the interaction, carbon dioxide is released, which appears as bubbles
• Wet nails or water in the varnish. The solvent and water do not mix well with each other. After the varnish dries, some of the water will evaporate, forming bubbles

Why the varnish bubbles on the nails when applied?

Manicure with bubbles can be considered spoiled. We have to wipe everything and re-spend time on beauty.

Causes of the appearance of bubbles during the application of lacquer:

• A tuberous nail plate. If you have uneven nails, use a thick base. In addition, you can polish the marigold with a soft buff or
• file. The old varnish. When stored on the surface of some varnishes, some kind of liquid appears. It's a solvent. With repeated mixing and application, it can cause bubbles of
• Curve and a hard brush. If the brush is withered or if it has flattened nails, use another brush
• Overdue lacquer
• Apply thick coat
• Stir before application. Most often, we shake the vial with the drug from top to bottom. This can not be done. It is better to rub the lacquer between your hands or lower it for a couple of minutes in hot water.

Why does the nail polish on the nails when it dries?

Often when applying bubbles, there is no varnish, but after drying the coatings they appear. Usually this is due to improper drying.

Causes of bleaching varnish when dry:

• Using a hair dryer. With a strong flow of air, it can penetrate into the deep layers of the varnish and provoke the occurrence of bubbles.
• Drying the varnish in cold water. Often, the bubbles are formed after immersing your fingers under a stream of cold water.
• Washing dishes after incomplete drying of the varnish. Do not rush with water procedures. It is necessary that the lacquer stayed on the nails for more than an hour and did not come into contact with the moisture

Why the varnish bubbles on the nails after drying?

This often happens even after the salon manicure. If this gel-lacquer and bubbles appeared after drying in a lamp, then, most likely, this is the result of a poor-quality product. Often varnish, base and top of different manufacturers can react with each other, so use the goods of one firm.

If you use a conventional varnish, then the bubbles may appear due to the use of lacquer, on the neck of which there are withered pieces. In addition, it is recommended after the application of the coating to blow into the vial. This will force out air and will prevent bubbling.

What if the lacquer is bubbling, how to avoid bubbles?

Of course, it's easier to prevent the appearance of bubbles than to fight them. For this, follow certain rules.

Ways to avoid bubbles:

• Degrease the plate before coating. To do this, use a regular nail polish remover or alcohol
• For an hour before the manicure, try not to wet your hands. The nail is saturated with water, which then can evaporate, forming bubbles on the
• coating. Do not shake the varnish before applying. From time to time, wipe the neck of the bottle with nail polish remover
• Before applying, immerse the vial in warm water
• Do not rush to dry the varnish with a hairdryer or cold water
• Use a base and a varnish of one manufacturer

How to remove nail polish bubbles?

There are special means for correcting the unevenness of the coating. The essence of the action of these means is to dissolve the top layer of the varnish and re-dry it. The most popular products are:

• Pro Fix. This tool is a well-known company. It is intended for leveling of low-quality coatings
• Smudge Corrector. This is Avon's product. It also contains a strong solvent that removes bubbles and helps smooth the coating

Which firm is better to take gel varnish?

Now on sale a lot of money from different manufacturers. They differ in quality and price. But the masters of the nail service give preference to certain brands that have proved themselves well.

Quality gel varnishes:

• Kodi
• IBD
• CND
• Bluesky
• Canni

Of course, now there are many and more affordable products that can cost many times cheaper. Only often gel varnish of low cost has to be applied not in 2 layers, but in 4. In addition, cheap varnish can strip or even not completely dry out in a lamp. Accordingly, do not skimp on health and beauty. There are cases when cheap Chinese varnishes caused allergies.

Which company is better to take shellac?

Pioneer in the manufacture of shellac was the company CND.It is she who is grateful for the millions of women whose manicure can now last so long. But the cost of these varnishes is not the most affordable, so women prefer analogies. Bluesky and Canni products proved themselves well.

They perfectly dry as in Led, hybrid and ultraviolet lamps. In addition, the base and top of these companies allow you to achieve maximum adhesion of the nail polish with the nail plate. This is what provides a long-lasting toe. In addition, these varnishes are inexpensive and are sold in large enough bottles. With proper application of the varnish and preparation of the plate, there will be no bubbles.

Do not use three-phase gel-lacquers, they lie well and dry, but they quickly break. This is due to poor adhesion of the coating and the nail plate. For quality manicure it is better to use three-phase systems. Top seals the lacquer and gives a glossy gloss surface that lasts for a long time.

As you can see, in order to avoid the appearance of bubbles, it is enough only to carefully approach the process and carefully follow the rules. And still need to buy quality coatings.

VIDEO: Bubbles when applying a varnish