Tie a hat for women - new items 2016

If you like to create beautiful fashionable things with your own hands, then our article with a detailed description and diagrams on how to tie a hat with knitting needles for wivesespecially for you.

Honestly, today every woman must know how to knit, because there is nothing more pleasant than the opportunity to pamper yourself and loved ones with budget new things.

How to tie a warm hat with knitting needles for women

If you are still a beginner, you can start with our first lesson on how to tie a simple hat with knitting needles for a woman. As a visual aid you can use the videos we've picked up, how to tie a hat for a woman with knitting needles.

How to tie a simple hat from a maher

Linking a beautiful hat is not as difficult as it seems. To do this, you need to arm yourself with knitting needles, yarn and patience.

Required:

• 125 grams of mohair
• knitting needles 4.5 mm

PP( patent loop) = insert the right knitting needle in the next loop one row lower( the loop of the current row is reset).

Description:

Type 75 loops and knit with an elastic band as follows:
1st row( LS): 2 faces, * 1x, 1s;repeat from * to the last loop, 1 person.
2nd row( IC): 1 person, * 1from, 1 person;repeat from * to the end of the row.
Tie another rubber band 8 rows, finish in the purl series.

Then continue with the rubber band:

1st row( LS): 1 person, * PP, 1 person;repeat from * to the end of the row.
2nd row( IC): 2 persons, * PP, 1 row;repeat from * to the end of the row.
Repeat 2 rows of pattern until the height of the cap is 26 cm from the set of loops, finish in the purl series.

Top formation:
1st row( LS): 1 person, * PP, 3from together;repeat from * to 2 last loops, PP, 1 face = 39 loops.
2nd row( IC): 1 person, * 1is, 1 person;repeat from * to the end of the row.
3rd row( LS): * 2 faces together;repeat from * to the last loop, 1 face = 20 loops.
4th row( IC): 1in, [2us together] 9 times, 1( 0) rel = 11 loops.

Beautiful hat for the winter from Angora

Needed:

• 120 g angora
• circular needles 5 mm
• marker for hinges
• set of double-pointed spokes 5 mm
• knitting needle

Garter stitch: face-to-face loops in each row.

Openwork pattern( the number of loops is a multiple of 7).
1 circle: face hinges.
2 circle: * 1 persons., 2 persons. Together, nakid, 1 persons., nakid, 1 st place to remove, 1 persons.and stretch it through the removed item;repeat from * to the end of the circle.
3 circle: facial loops.
4 circle: * 2 persons.together, nakid, 3 persons., nakid, 1 st place to remove, 1 persons.and stretch it through the removed item;repeat from * to the end of the circle.
Repeat 1-4 circles.a number of patterns.

Description:
For circular knitting needles, dial 84 loops. Do not join in a circle, knit with straight and reverse rows of garter stitch 2.5 cm. Place the marker at the beginning of the row and connect it to a circle. Repeat 1-4 circles.rows of openwork pattern 6 times.

Top formation:
Go to the double-pointed needles when the number of loops decreases.
1 circle: * 10 persons., 2 persons.together;repeat from * to the end of the circle = 77 p.
2, 4 and 6 circle: facial loops.
3 circle: * 9 persons., 2 persons.together;repeat from * to the end of the circle = 70 p.
5 circle: * 8 persons., 2 persons.together;repeat from * to the end of the circle = 63 p.
7 circle: * 7 persons., 2 persons.together;repeat from * to the end of the circle = 56 p.
8 circle: * 6 persons., 2 persons.together;repeat from * to the end of the circle = 49 p.
9 circle: * 5 persons., 2 persons.together;repeat from * to the end of the circle = 42 p.
10 circle: * 4 persons., 2 persons.together;repeat from * to the end of the circle = 35 p.
11 circle: * 3 persons., 2 persons.together;repeat from * to the end of the circle = 28 p.
12 circle: * 2 persons., 2 persons.together;repeat from * to the end of the circle = 21 p.
13 circle: 1 persons., 2 persons.together;repeat from * to the end of the circle = 14 p.
14 circle: 2 persons.together;repeat from * to the end of the circle = 7 pts.

Cut the thread, leave the long end. Insert a piece into a knitting needle, stretch it through the remaining loops and tighten. Insert the thread from the set of loops into the needle and make a seam of garter stitch. Hide the remnants of threads from the wrong side.

Warm hat made of weed

Necessary: ​​

• 100 g yarn grass
• knitting needles No. 6.

Description:
Start knitting by typing 60 loops on knitting needles No. 6.Knit an elastic band 1x1 about 4 cm.

In order to expand the circle, after every 5 loops add 1 loop each with a twisted crochet. Then tie straight 5 cm, then start decreasing 1 loop in each face row every 5 loops. The remaining loops( there will be about 10 of them) are gathered with a needle on the thread, folded in half, then fix it.

The cap must be sewn with a knitted suture.
( On YouTube you can watch the video how to tie a simple cap with knitting needles.)

How to tie a fashionable hat

After you have learned how to knit simple caps, you can go to more complex models. In 2016, the following models will be relevant: a voluminous cap, a hat with ear-flaps, bini( also called a hat-stocking, a sock, a hood), a turban, a hood( or hat-cap), a model with a visor, a cap with a pompon,a cap, mischievous with ears, usual with a lapel, a cap snod( or a cap-hood).

Fashionable rounded cap of large yarn

Size universal 53-54 cm.

Necessary: ​​

• thick yarn 200 g
• circular knitting needles 10 mm long 40 cm
• marker for hinges
• thick knitted needle

Description:

Dial 32 loops. Place the marker at the beginning of the row and merge into a circle.
Knit an elastic band as follows: * 2 persons, 2 izn;repeat from * to the end.
Carry out 14 more rounds and evenly lower 2 loops, tying up 2 persons together in the last circle of the bubble = 30 loops.
Next, knit 12 circular rows only with facial loops.

Nextcircle: knit 2 facial pieces together = 15 loops.
Carry out 2 more circles with face loops. Cut the thread, leaving a long tail. Insert a piece into the knitting needle. Remove all loops on the thread. Pull and fix the thread on the wrong side.

Universal hat-ear flaps for women

Size - 54 cm( head volume)

Necessary: ​​

• 250 g yarn
• ordinary knitting needles 4 mm
  The cap can be knit in 2 strands.

Ears:
Type 6 loops and begin knitting cap with garter stitch. At the same time, add 6 times every 2 rows of 1 loop on each edge. Then tie another 14 straight rows.

If you add more loops, then your eyelet will be much wider. If you tie up more rows, then similarly your ear will be longer than in the photo. So, you tied two identical ears.

WALLET HOSE:

Now we collect everything in one product. To do this, dial the loops from your ears one by one on the long spoke and the new ones for the front and back of the cap. Pay attention, in the beginning the back part of the cap will gradually increase and, as a result, will consist of two parts, connected by a mattress suture. For visual representation, look at the pattern photo.

So you need to add 1 loop, tie up the face viscous( or any other, if you do not want an option from the photo) loop of one eyelet, dial an additional 20 loops to pass the caps, tie the second eyelet and type an additional 1 loop.

Continue knitting the hats with your pattern or facial smoothness, as suggested in the photo. At the same time, add loops to extend the rear part of the product in each second row from two sides of the knitted fabric 1 time through 2 loops and 1 time through 3 loops. This will be about 8 rows. This will be the full width of your hat. If necessary, you can adjust it, adding more loops in the process of knitting.

You need to knit about 16 rows, which is the height of the cap before narrowing on the vertex.

Adjustments in this way: 1 edge loop *, 5 face loops, 2 loops along with a slope to the right, 2 face loops, 2 loops along with a slant to the left, 5 face loops *, repeat from * to *, 1I have a loop.
Loosen the loops in this manner 3 more times every 2 rows, and pull the remaining loops after 2 rows. Sew the hat back with a mattress seam.

For the front part of the lapel, dial 20 loops around the edge and bind it with garter stitch to the desired height.then close all the hinges and attach the lapel in any acceptable way.

For braids it is necessary to cut 18 threads 1 meter long, fold them in half and thread them into the bottom of the ears and braid them in braids.

Hat knitting cap( hat-stocking, cap-cap, cap)

Needed:

• circular knitting needles 4 mm
• 200 g medium-thick yarn
• centimeter tape

Description:

First of all, use a centimeter tape measure the head circumference on whichplan to knit a hat. Let's say you got 56 cm. This means that you will knit a hat of the 56th size.

The second important step is to determine the density of knitting. What does the density of knitting mean? This is the number of loops and rows necessary to unfasten a 10x10cm canvas. What does it mean when translating into "simple language" - correctly calculate how many loops need to be typed at the beginning of the job.
Dial 22 loops and knit 10 cm, chosen for the cap pattern.

Flatten the bound sample by iron through a damp cloth. You do not need to smoothen it much. Do this carefully, steaming the sample lightly.
Measure the prepared sample around the perimeter. Let's say you got a 10x10 cm sample with 30 rows tied. This means that the density of knitting with this pattern is 2 loops per 1 cm and 3 rows per 1 cm.

That is, for the 56th size cap you need to type: 56х2 = 112 a knuckle and tie 30 cm, that is, 30х3 = 90 rows.

Type the required number of loops on the circular knitting needles. And knit in a circle, using a fishing line, the previously selected pattern of 25-27 cm up. You will have a knitted fabric in the form of a pipe. After 25 cm, start loosening the loops by tying together 2 loops in each third row until you have 3 loops left on the spoke. With decreasing loops, knit the fabric with garter stitch. Cut the thread from the skein, leaving about 10 cm, and stretch it through the 3 remaining loops, tying them together and fixing the end from the wrong side.

See the video « tie binie».

Wool turban cap for the cold season

Required:

• 150 g of wool yarn
• spokes № 2,5 - 3

Sample matings: 1st row - one front hinge, 1 Wrong loop.2 nd row - before the back loop, make a cape, and remove the back loop, without tying, the facial loops knit face. The third and all subsequent rows - before the back loop the cape, purl without removing, and the front loop and the cuff of the previous row are tied together( grab from above).
The cap consists of two parts: the turban itself and the bottom.. Height of 10-12 cm turban

Description:
Dial turban height about hinge 24, and a knit band, whose length is equal to half the circumference of the head minus 2 cm
Then all loops is bisected..Remove the left part on the pin and temporarily do not knit, and on the right side, tie another 4 rows. After that, swap both parts so that the right side goes left and over the left side. Then put all the loops on one spoke and knit the second half of the strip.

If you have two identical loops next to the knitting of the second half, then tie them together( so as not to knock down the pattern), and add one loop at the end of the row. When the required length is connected, close the hinges.

Now type the loops along the entire length of the strip and tie 7 - 8 rows with an English rubber band, then 2.5 cm with an elastic band 1x1.After that, start knitting the bottom: 2 rows of double stocking knitting( facial loops knit face, purl, remove the thread before work).Then, fasten two loops together on the face, so that the face loop is on top of the back one. Crochet 3-4 rows of simple stocking, then on the face of 2 rows - double stocking, the next 1-2 face series - 2 loops together. The remaining 6-8 stitches pull. Peel off the bottom through a damp cloth.

Video "to tie a turban spoke to the woman»

original cap-hood( or cap-hat) for a very cold season

necessary: ​​

• 400 g of yarn
• needles №3

Description:
On the spokes need to dial 31 loop and tie the transverse stripany mating that you choose for yourself with a frill length of 110 cm, so that it would have a beautiful and finished look, then make the corners in it in shorter rows.
In each row, be sure to turn down the loop knit 2, that is first on the front of the product need to knit 29 loops, and then leave the 2 loops intact, wrapping 30th loop and turning the knitted product on the wrong side, then provyazyvaya the entire series until the end.

In the next row in the front side, also connect 27 loops, leaving 4 loops intact.

Circle the 28th loop and turn it to the wrong side again. So, knit the whole product.

Having stopped unbinding all the corner loops, start knitting the main part, increasing the rows, which will make it possible to change the direction of knitting. First, on the front side, tie three loops, and in the following rows increase the number of loops by 2, but only the knitted ones.

Having connected the strip to the corners, on the one hand, take about 180 loops along the edge loops and tie the product with garter stitch. Then in the subsequent row, after every three loops, remove one loop. Repeat this reduction 2 more times. Then knit 5 cm garter stitch.

After 5 cm for the main part of the cap add evenly to 90 loops and again 17 cm knit with garter stitch. Then select 30 loops in the center and knit them only, grabbing and knitting together - and at the beginning and at the end - 2 loops from the central part on each side. After all the center hinges are connected to the side hinges, close the remaining hinges.

Hat with a visor

Need:

• 250-300 g yarn
• circular knitting needles No. 2.5
• silicone visor

Description:
Collect 80 loops, close in a circle and knit 4-6 rows of face, ie,facial loops.

When I connect in a circle, I leave the tail of thread-to indicate the beginning of the row. We divide the number of loops into three parts-18pt, 44et., 18pt. On the 44th we will tie the visor, making an increase-10pitel every 4ft. Addition is made to ensure that the visor is well laid down and conveniently located in his pocket.
When the pocket for the visor is tied and the adjustments are made, we bind the second half of the rim.

We fold the canvas, ponytail the thread of the thread on the face of knitting( the beginning of the series!).We make one loop from the knitting needle, raise one and tie it from the set edge. We reach approximately to the middle of the visor, we insert the visor blank and continue to tie the loops to the end of the row.up to the tail.
The top of the rim( ie the front) should be several rows larger than the inner( to hide the holes from the turns).

And so at us on spokes-160 loops. You can start tying tulle. We divide the loops into 8 parts( wedges), and we knit the pattern "zigzag".One wedge is a knee. Rapport- * from 1 pet.to loosen 3 loops, 8 faces., 3 loops together( behind the back wall), 8 faces. * - repeat 7 more times. If you want a three-dimensional cap, you can add 16 loops = 176 pet. One wedge - 22 loops. Rapport- * from the first.3 loops, 9 faces, 3 loops together( behind the back wall), 9 faces. * repeat 7 more times.

We knit the desired height of the crown, tying one row-drawing "zigzag", one row exactly.

Tulia is ready. We begin to make adjustments. One row is a zigzag, one row is straight.
One row-bind only 3 loops together, and from 1 loop-3 loops do not do, one row exactly.

When there are 16 loops left on the knitting needles, fasten 2 loops together and pull them together.
Cap ready!

( See the video from the best needlewomen of the network " tie a hat with a visor" on YouTube channel).

Stylish hat with pompon

The size is universal.
You need:

• for 1 coil of yarn( 75% acrylic, 25% wool, 136 m / 85 g) of three different colors: Oxford Gray( 78046) - A, Steel Blue( 78105) - In, Soft Teal( 78209) - C;
• spokes 5.5 and 6 mm;
• auxiliary knitting needle.

Knitting density:
15 loops and 20 rows = 10 cm with facial smoothness with spokes of a larger size.

Legend:
K8P = remove 4 loops on the auxiliary spoke at work, 4 persons, then 4 persons from the auxiliary spoke;
K8L = remove 4 loops on the auxiliary spoke before work, 4 persons, then 4 persons from the auxiliary knitting needle;
+1( add 1 loop) = raise the loop from the broach and knit the front for the back.wall.

Description:
For smaller knitting needles, thread A to type 73 loops and tie 7.5 cm elastic band to 1 face, 1 reindeer. Finish in the purl.

Go for larger knitting needles.
1st row( LS): knit a thread in 3 persons, * + 1, 2 persons, +1, 3 persons;repeat from * to end = 101 loop.
2nd and all purl rows: purl loops.
3rd row: 5 persons, * K8L, 4 persons;repeat from * to the end.
from the 4th to the 10th row: start in the purl series and knit with the facial smoothness( only 7 rows).
11th row( LC): 1 persons, * K8P, 4 persons;repeat from * to 4 last loops, 4 persons.
13th row: facial loops.
15 and 17 rows: knit thread With facial loops.
from the 19th to the 27th row: knit with thread C and repeat from 3rd to 11th row again.
28th row( IC): purl loops.

Top formation:
1st row( LS): 1 persons, * 2 persons together, 3 persons;repeat from * to end = 81 loop.
2nd and all purl rows: purl loops.
3rd row: 1 persons, * 2 persons together;repeat from * to end = 61 loop.
5th series: 1 persons, * 2 persons together, 1 persons;repeat from * to end = 41 loop.
7th row: 1 persons * 2 persons together;repeat from * to end = 21 loop.

Cut the thread, leaving a long tail. Use a needle to stretch the piece through the remaining loops. Pull and fasten the thread. Run the seam.

Pompon:
Thread A in 2 additions, wrap your hand about 50 times. Leave a long section. Carefully remove the skein from the rugi and tie it up tight. Sew a pompom to the top of the hat.

See video how to tie a hat with pompon:

Warm double hat for winter

Necessary: ​​

• circular knitting needles;
• sweetheart yarn;
• soft yarn for lining;
• centimeter tape;
• scissors;
• hook.

In order to tie a double cap of your size, you need to know the circumference of your own head. Determine it using a centimeter tape. Record the total and calculate the loops for the set. It's true that the standard will help you calculate, for which you need to link a small square using a working thread. Count the number of loops in one centimeter of the standard.

For knitting the front of the head, multiply this amount by the circumference of the head in centimeters and add 4-5 feed loops. For the lining, take the yarn created for knitting children's things. It does not prick or irritate the skin.

Description:
Type two knitting needles together, the desired number of loops, pull out one of the knitting needles and start knitting the elastic.

The most reliable is the rubber band 1x1.It perfectly stretches and preserves the initial appearance for a long time. After tying 5-6cm of elastic, start hosiery knitting. When knitting in a circle, it is better to tie the front loops for the front thread, so they are more even.

The main part of the cap is knit about 15cm high. Then start downs. If you decide to knit a double cap on the radial spokes, divide the number of loops by 4, mark each part and tie each part first with 2 loops together. In this case, if knitting is done with a set of 5 spokes, tie in two loops at the beginning of each knitting needle.

After all the loops are closed, fix the thread on the wrong side of the cap with the hook.

For the bonnet padding, type hinges from the wrong side of the main fabric, immediately after the end of the gum. Do not forget to reduce 4-5 loops. Do knitting by facial smoothness. Lay the lining 1-2cm shorter than the main part of the cap and close the same pattern.
Jerseys are hand washed, in warm water, with special means for washing knitted products. To squeeze them it is necessary not twisting, and to dry on a terry towel in the straightened kind.

Hat with ears

Size 56-57.

• Needed:
  • 150 g yarn
  • circular knitting needles 4 mm

  Description:
  For the first "eyelet" you need to type 7 loops and tie it in this order: 1Krom., 1IP, 1LP, 1IP, 1LP, 1IP, 1Chrome.
  2-nd and all purl rows - are knitted according to the drawing.

  Next, knit the rubber band 1LP x 1IP, making the addition of loops on both sides in each face row 7 times 2 loops( at the beginning and end of the row).Enter new loops in the drawing.

  As soon as there are about 21 loops on the spokes, measure the length of the "ear".
  If the length is suitable, then postpone, and proceed to knitting the second one.
  If not, then tie directly the required length, but without adding loops.
  The second "ear" connect the same.

  Then on the circular or chalk knitting needles( you can knit and straight, but then there will be a seam on the nape, and the loops will need to be distributed taking into account this seam), type 33 loops, add 21 loops of the first "ear", dial again 33 loops,add 21 loops of the second "ear".

  Next, knit with an ordinary rubber band 1LP x 1IP approximately 3-4 rows. See, that the pattern of elastic on the new typed hinges is harmoniously distributed.
  for the transfer and for the back of the cap, which consist of 31 loops, distribute the loops as follows:

  7 rubber loops, 6 loop loops, 7 loop loops, 6 loop loops, 7 loop loops = total 33 loops;for "ears", each of which consists of 21 loops, distribute the loops in this way: 6 harness loops, 1 PI, 6 loop loops, 1IP, 6 loop loops = total 20 loops.1 carefully cut the loop, i.e.tie two loops together without damaging the pattern.

  Knit directly, repeat the rapport of the "bundle" according to the scheme, about 14-16 centimeters.
  After you start decreasing loops.
  For this, in every 4th row, evenly throughout the series, cut:
  3 times 1/4 of the total number of loops

  Check the height of the cap, if it is suitable, then pull off the remaining loops with the end of the thread and secure them. As a rule, the height of the cap with the ears can be from 20 to 22 centimeters. Perhaps someone likes a higher one.
  If the height is insufficient, then tie a few more rows in height, while reducing the existing loops, and close at the end.

  For fastenings, attach pieces of yarn to the ends of the "ears".Approximately half the length of the desired length of the bandages. Yarn yarn in several threads for three parts, which you then braid into a pigtail. This will be your zavyazochka, tie a knot at the end and along the yarn at the bottom of the bandage with scissors.
  For the top of the head, make a pompom.

  See the form "how to tie a woman's hat with ears"

  Winter knitted hat with a lapel

  Size 56-57.

  Need

  • 150 g yarn
  • ordinary knitting needles No. 5

  Description:

  The number of hinges should be divided by 4, plus 2 edge loops. If we knit on an adult, it will take approximately 98 loops: 96 + 2 = 98.
  We select the loops and proceed to knitting the first row: we remove the edge loop without tying, then the elastic band 2x2: 2, the face loops, the two purlins, the last loop of the row( edgeband) is always sewn by the back to maintain the even edges of the product. We always remove the first loop of the row without tying it.

  All further rows - both purl and facial knit according to the pattern: 2 facial loops over the facial, 2 purl loops over the purlins.
  When you reach the required depth of the cap, taking into account the chosen version of the lapel, we begin to do the downsizing from the next front row: we sew the two back loops together with the wrong loop.

  In the second row( purl) we knit according to the figure: 2 purl loops, 1 facial.
  In the third row, we subtract facial loops: instead of the two facial we sew two loops together with the facial loops. It turns out an elastic band 1x1: 1 a face loop of two facial, one purl.

  Fourth row - according to the figure: 1 purl loop, 1 facial.
  The fifth row( front) we sew together on two loops of the front.
  And the sixth, the final row - all the loops are purl.

  As you can see, the decrements when knitting a cap from a rectangle have the same principle as when knitting in a circle, only the adjustment to the front and back rows is done.

  When knitting the caps from the rectangle, the tip of the thread is best left with the sub-lines to fit the back seam. We take the remaining loops on it with a hook or a large needle, pull it into a ring and gently sew the cap. You can connect the edges of the cap in different ways( seams), this is an occasion for a separate article, but the main goal in any case is to make the seam look the same neatly from the front side, and in that part of the underside that when you turn the edge of the cap turns out to be in sight. Remember this!

  That's all. We entangle, cut off the excess end of the thread and go to the fitting.
  I wish you interesting work and warm hats!

  If you need an illustrative example, watch the video as associate the hat with the lapel on YouTube.

  Hit of the season - a snoop

  Necessary: ​​

  • 200 g yarn
  • circular knitting needles No. 5

  First determine the width and length of the future product, and then tie a small piece of the viscous that you preferred. Selecting the fragment you like, you can calculate the number of loops for the product. So, type the right number of loops on the circular needles. Proposed snod needs to be knit with a Polish rubber band. This knitting is not very difficult, and if you knit it for the first time - do not be afraid, you adapt quickly enough.

  The resulting chain of loops must be joined in a circle and knit.

  First row: 3 facial loops and one purl.

  The second row: two face loops, one wrong, and one face loop.

  Third row: is similar to the first row.

  Fourth row: bind the same way as the second.
  Next, continue to knit cyclically. Do not forget that the width of the cap is more - the more spectacular it will be to lay on the head.| |

  The video "how tie a hat snood" will help beginners to more fully understand the whole process of creating such a beautiful knitted creation.

  How to tie a hat with a pattern

  The caps with a pattern look more impressive, but knitting them is much more difficult, because you need to follow both the shape of the cap and the pattern. Sometimes you get confused and you have to start all over again. But if you are attentive and trained on a small sample, you will succeed at the first try.

  A cap of an English rubber band

  

  It is necessary: ​​

  • a woolen yarn - 50 g at 135 m;
  • spokes straight 4 - 2 pcs.;
  • hook knitting;
  • scissors;
  • needle is darning.

  1. Find out the girth of the head of the future owner of the headgear and be sure to make a small square of the knitted fabric for the sample - the knot density is always calculated individually. When knitting the hats with an English rubber band, an elastic, almost dimensionless, product is created. In the example described, with a head girth of 55-60 cm, a knit density of 18 loops for 46 rows, 78 loops are made for the rim of the head. The spokes are straight, medium diameter( No. 4).
  You can begin to knit a cap with an English rubber band without performing a flexible rim-rim. At the same time, you can make the canvas with or without a gate. Please note: 1x1 elastic band fixes the edge well!

  2. Tie the bezel with straight and purl rows, successively alternating the two face and two purl loops. When the 8 rows are ready, begin to knit the cap with an English rubber band. In the first row of the pattern, you will need to make uniform increments, bringing the total number of loops to 95.
  To add loops, divide the series into the same lengths, and in each of them tie the face on an extra threadhook. To do this, grab and twist the cross threads between adjacent loops.

  3. Carry out a lush canvas with an English rubber band until you reach a height of 25 cm from the edge of the rim. To form the basic pattern of knitwear, perform loop alternations in the following sequence. In the first row of the pattern, do only the facial;start the second row with the edge loop( it is removed unrolled);perform front. Then repeat the so-called double facial loops, inserting the right spoke into the threaded arch of the previous row. The closing hinges are front and edge.

  4. Begin the third row of the English rubber band also from the edge loop, then alternate the double and normal facial loops until the left spoke has only a pair of threaded arms. The first of them is tying the double facial, the second one will be edgeband. Pattern repeat on the finished sample of the second and third rows, until you make the main canvas headgear the right size.

  5. Proceed to the formation of the crown of the head. To round the knitted fabric and pull it from above, make uniform loops in the forward and back rows: in the beginning, the edge loop;for a row of 3 threaded arches are tied together in a conventional facial;in the end - edge. In the next row, make cuts without leaving the edges, always tie together 3 loops together.

  6. Cut the working yarn, leaving the "tail" about 10 cm long. Pull open the open loops of the last row and drag the crocheted hats into the inside. Form a strong knot.

  7. Unscrew the cap with the wrong side down, strip off the knitted fabric and carefully join the side edges of the part. Carry out a neat joint with a darning needle and a thread from the working coil. To ensure that the stitch remains elastic enough, and the product does not deform, do not make stitches too tight.

  See the video "how to tie a cap with an English rubber band"

  Stylish cap with braids

  

  Necessary: ​​

  • 150 g yarn
  • knitting needles No. 3.5,
  • knitting needles No. 4, 5

  Knitting on two spokes, because on a circular big thread I have andit turns out strongly in the tightness and large holes between the loops, and I love poplotneye. Potom sewed.
  I typed 96 loops on the spokes. Spices №3,5.Knitted in 2 threads, yarn with wool 20%, 135 gr at 50 m.

  Connected rubber band 2 × 2 about 6 cm.
  Switched to knitting needles 4,5

  Pattern:

  • ( 2 persons, 6 persons, 2 persons, 2 persons) - repeat to the end of the row.
  • to knit by drawing, where it is known, where individuals are persons.

  To knit so 6 rows and in the 7th row do overlaps where there are 6 faces.(in YouTube is full of video how to knit braids).I did this: I carry 3 loops on the toothpick, I fasten the next 3 facial ones, I return the 3 loops from the toothpick to the left knitting needle and tie them too. Next on the drawing 2 out, 2 faces, 2 out and again the overlaps. So to the end of the series.

  After these overlaps we knit 1 row on the wrong side according to the drawing, I do not consider it.

  And repeat again all 6 rows, in the 7th overlap
  And repeat again all 6 rows and in the 7th overlap
  Total it turned out 3 spits made. And from the beginning of knitting approximately 15-17 cm tied.

  Further knit the same way, but do adjustments. How to make the deductions, I will not write, because I always did different things in three caps, I did not understand how to do it better. The most important thing is that they are not discernible.

  After watching the video "how to tie a hat with braids for women", you can easily master the science of knitting.