Glass Ionomer Cement Stomafil - purpose and application

Stomafil is a dental cement used to seal carious cavities.

Due to its ease of use and sufficient strength, it is widely used by dentists.

The filler component contains:

• aluminofluorosilicate glass;
• aqueous solution of polyacrylic acid.

Produced in a can of white plastic weighing 10 g.

Standard kit includes:

• 1 can of powder color A2;
• 1 color powder bank B3;
• 1 can of powder color C2;
• liquid used for mixing in a vial, weight 12 g;
• the conditioner in a vial in weight of 4 g;
• measuring spoon;
• notepad for mixing.

The cost of the set is 1200-1500 rubles.

Material properties

Stomafil belongs to the group of glass ionomer cements. It has a high adhesion to enamel and dentine. In addition, due to the fluoride ions that make up the material, a long anticarious effect is provided.

Main characteristics of the material:

• good strength;
• precise fit along the edges of the carious cavity;
• contained fluoride ions migrate unimpeded into the tooth tissue;
• satisfactory aesthetics;
• treatment of carious cavity is limited only to the removal of altered tissues;
• ease of use;
• long working hours.

Scope of Application

The purpose of Stomafil is as follows:

• filling in cavities III and V in permanent teeth;
• installation of a seal in cavities of all kinds in milk teeth;
• installation of a seal in the case of non-carious lesions;
• is used when it is necessary to apply an insulating liner for any kind of filling materials.

How to use - all stages of

Stomafil is used according to the following procedure:

1. The carious cavity is treated according to all the rules.
2. Before setting the seal, the working field is insulated with cotton rollers.
3. The material must be mixed on a completely dried glass plate.
4. Use a measuring spoon to take the necessary amount of cement and spread it on the plate.
5. Then squeeze the liquid in the ratio: 2 drops to 3 scoops.
6. For mixing, use a plastic or metal spatula, which must also be completely dry.
7. First, only half of the powder is added to the liquid and everything is thoroughly mixed. The remaining material is gradually introduced in small portions. As a result, you should get a homogeneous mixture that has a glossy surface.
8. The maximum time that can be spent on mixing is 60 seconds.
9. The carious cavity is treated with an air conditioner, which is then rinsed off and the tissues are dried.
10. Dry the smoothing material into the cavity and distribute it evenly. Seal the seal with a squeezed wet ball. The working time of the mixture is 2 minutes. It is possible layer-by-layer application for 2-3 times.
11. Full hardening of the seal occurs within 5-7 minutes.
12. Then, the surface is simulated with finishes and carborundum stones.
13. At the end, the seal is ground and polished.

In case of using Stomafil as an insulating lining, it is not necessary to apply conditioner. Cement is applied to the bottom of the carious cavity with a thin layer and after solidification, other materials are introduced according to the instructions to it.

Special instructions

The kit should be stored in a dry and cool place. The lids of all bottles and cans are tightly closed.

It is not recommended to use for the treatment of patients with individual intolerance to the components of the drug. Also, the use of fluorosis in patients is excluded.

What can I replace?

The following analogs are available on the market of dental materials, which can be replaced with Stomafil:

1. Vitrebond .Manufacturer of 3M ESPE.It differs by the mechanism of curing. This material hardens when using photopolymerizing lamps. The price of a set of powder and liquid is much higher.
2. Vitremer .Refers to cement with a triple curing mechanism. Used as a seal on all groups of teeth.
3. Ionoseal .Manufacturer of "VOCO".Also differs by the mechanism of curing.
4. Chromium .Manufacturer - the company "Vladmyva".Used for filling of carious cavities of I and II classes. At a cost of a set of this material will cost less, but the adhesion to the tissues of the tooth will be worse.
5. Ketac Molar .It is also a glass ionomer cement of chemical curing. The method of application is no different. The cost of this drug will be higher, but it has more indications for use.
6. Fuji I .The manufacturer is GC.Basically, this cement is used to fix orthopedic structures.
7. TimeLine .Used in the form of an insulating liner for composites. Refers to light-cured cements.