Modern dentists - implantologists are able to conduct serious reconstructive interventions on the dentoalveolar system of a person. And dental implantation is the most common type of their activity.
Implants from titanium alloys do not subject the biological tissues of the inflammatory reaction, and therefore, do not have undesirable effects for the patient.
Modern technologies allow without serious complications to carry out the procedure of replacement of the dentition or its part, thereby completely restoring the chewing function and cosmetic parameters of the oral cavity.
Contents
- About the implant manufacturer Biogranizon
- What does modern dental implantology offer
- lineup Used technologies
- installation process
- life histories Overview of the advantages
About the implant manufacturer Biogorizon
Biohorizons is an American company founded in 1994 that could establish itself withthe best side and gain popularity in many countries of the world.
Branches of the manufacturer are located in more than 60 countries of the world. Specialists of the company focused on the development and improvement of production technology, improvement of design and quality of their products.
The company's main clinical testing base is located at Alabama National University in Birmingham, United Kingdom.
It is here that a lot of highly technological devices are made, which perform approbation of products for implantation, with their subsequent improvement and introduction of necessary changes.
Engineers and other specialists of the manufacturer have developed a wide base of dental products used in modern 
reconstructive surgery of the face and dentoalveolar system.
Thanks to a diverse range of products, it is not difficult to choose an individual variant for the patient with any specific anatomical features.
Prostheses and implants Biohorizon allows to correct the dentition even in the most difficult cases, which are associated with anomalies of the dentoalveolar system, and at the same time effectively correct the chewing function.
What modern dental implantology offers
In modern dental practice, a variety of dental implants and prostheses are used:
- Leading positions are occupied by integral structures with a threaded section - cone-shaped screw implants .The diameter of their cross section is larger in the cervical zone, and at the apex smaller. For the account of this, greater stability and better survival of the prosthetic elements is achieved.
- Crowns of their various materials. Their diameter along the entire length remains unchanged, this product is excellent for bone tissue with a high degree of density. Used for partial prosthetics.
- Plate prosthesis .They have a large area, contacting with bone tissue, used as bridges, attached to intact teeth.
- Prostheses, which consist of two main parts of the .Immediately from the implant - the part that is screwed into the jaw and fixed there forever and from dental cement. The third part of the design is an abutment that connects the implant and the crown instead of the lost tooth.
Model line
Product range The biohorizon consists of root implants of the series "Internal", "Single-stage" and "Laser-Lok 3".
Features of each model:
- Internal .Root implants, which are characterized by a square shape of the thread, which helps secure fixation between the contact surfaces of the gum and the crown between the
.The surgical set of products of Internal has its own color coding, which makes it possible to greatly simplify the work of maxillofacial surgeons. - The Single-stage series incorporates all the advantages of implants for a two-stage installation, but allows for one-stage implantation! To work with the Single-Stage, a special set of surgical instruments has been developed, which allows for safe intervention in large reconstructive operations. For an ideal internal connection of the product to the bone, an individual version of the implant installation is used in each case. There is a color coding for convenient and accurate work of the maxillofacial surgeon.
- The newest model in the BioHorizons Laser-Lok 3.0 implant line belongs to prostheses with a two-stage installation. Has a unique surface that provides a strong attachment to soft tissues in the region of the neck of the tooth. The products are suitable for installation in places with the narrowest spaces between the teeth. In this case, the Laser-Lok 3.0 series is the only one in which the size of the pin with a diameter of 3 mm is used.
Reverse-buttress thread of all products makes it possible to get the largest contact area of the prosthesis with bone tissue.
Used technologies
Biohorizon implants, due to the most effective design and alloy composition, are unique in their kind. They allow you to correct even the most complex tooth-jaw pathology.
In contrast to products from other manufacturers, BioHorizons implants allow a third to reduce the regeneration rate of bone and fibrous tissues in the postoperative period after extraction of the affected tooth.
The patented Laser-LoK thread makes it possible to practically shorten the time for osteoregeneration of bone tissue in the implant attachment area.
Already in the early stages after implantation, the patient is allowed moderate masticatory load. Thanks to Laser-Lok, the implant area was increased to 160%.This makes it possible to distribute the gum load evenly throughout the entire area of the bone tissue adjacent to the product.
The crowns undergo special treatment with calcium phosphate, which allows to cover the surface of the future artificial tooth with a special medicinal layer that increases the rate of osteoregeneration and provides further reliable fixation of the implanted prosthesis in the alveolar hole.
The special layer Laser-Loc provides the maximum speed and efficiency of engrafting replacement material to biological tissues.
Anatomically the natural shape of the product carefully distributes the load on the implant itself and surrounding tissues.
Installation process
The implantation process is divided into several consecutive stages.
- consultation with a dentist with subsequent diagnosis;
- directly installation of construction;
- rehabilitation period;
For a complete assessment of the dental system of the patient, the doctor prescribes the passage of important studies and the delivery of tests:
- a general blood test;
- general urinalysis;
- ECG;
- Fluorography.
The implantation process itself is the most responsible. After the diagnosis, the doctor makes a plan for surgical intervention. If the patient's bone is of small thickness, then an implant with a diameter of 3 mm is perfectly suitable.
Then the optimal variant of the prosthesis is selected. The implantation procedure is carried out under local conductive anesthesia and takes an average of 40 to 80 minutes.
The installation also includes attachment of the abutment and direct fixation of the crown - this is the so-called orthopedic stage.
Stories from the life of
Biohorizont implants have been saving the health and smiles of happy people for more than one year, the responses of two of them are suggested for study below.
After the road accident in September 2016, I had to replace 3 dropped teeth. I admit, I was very afraid, because I have diabetes for 6 years already. I searched the information on the Internet for a long time and came across the firm BioHorizons.
Then he consulted the treating doctor and he approved my choice and within a week I was preparing for the operation. After prosthetics, 3 months passed. My state of health is excellent. I eat a variety of food and I have never felt pain. Thanks doctor and American manufacturers!
Mikhail, 45 years old
I confess honestly, the dentist had 1 time in his life and when he brought his daughter for a checkup. But recently, I began to worry about strong toothaches, every evening I climbed on the wall!
After the trip to the doctors, the question arose about partial replacement of teeth. Tortured doubts about the possibility of installing prostheses. In the clinic, where I was observed, I was told the company Biohorizont.
After the family council, a decision was made about prompt treatment, because they feared that prices would rise. What was our surprise when we found out that prices had not changed for 3 years, even despite the crisis and the fall of the ruble!
Consultants picked up suitable prostheses, and in a few sessions I installed new teeth. After 2 months I continue to treat the rest of my teeth, the implants that are installed sit well, the food does not fall under the prosthesis. Gums are not inflamed. My advice to all: do not run your teeth and go to dentists on time!
Valery 34 years old, entrepreneur
Overview of the advantages of
Summing up, you can make the following advantages of American implants:
- The product lineup is filled in such a way as to take into account the anatomical features of all patients. The firm provides
manufacturing of the design on individual molds of the jaw device of the client. - A wide range of products makes it possible to select the best option for affordable replacement of any tooth in the oral cavity at affordable prices.
- Hypoallergenic materials will eliminate the risk of hypersensitivity to the foreign body. Postoperative period usually passes without significant complications.
- Advanced technology allows, if necessary, to replace the whole dentition on one of the jaws.
- Coating the new generation provide the desired cosmetic effect, protects the enamel from mechanical damage and preserves biocompatibility with surrounding tissues.
- Studies conducted by independent experts show a high survival rate of the artificial tooth structure.
- The products are fully certified and approved for sale on the Russian market.
The average price for a model range of Biohorizon implants ranges from 20,000 to 30,000 rubles. Regularly distributors organize promotions with discounts.