Variety of solutions and advantages of Bicon implants

For the restoration of lost teeth, the most advanced technological developments are used, which contribute to providing a sufficiently high aesthetic appeal and reliability of artificial teeth.

Modern implants are virtually indistinguishable from their molars. Today, the procedure of implantation is practiced literally everywhere. The quality of the rendered dental services in this matter is determined by the professionalism of the implantologist and the implants chosen.

Bicon Dental Implants - American quality and availability

Before prosthetics it turns out that many people have bone tissue in placeThe removed tooth is too small or the area of ​​operation is too closely located in structures important from an anatomical point of view. In such situations, orthodontists recommend the use of short implants.

The company Beacon Dental Implants first began to develop dental structures for implantation in the distant 1985.For those times, prostheses, the length of which was about 8 mm, were considered very short in comparison with the usual twelve-millimeter.

Some threaded pins reached approximately 18-20 mm. The next generation of implants have become even shorter. At the same time, as it is not strange, all the devices fully proved the really high clinical operational ability.

Thanks to the originality of the design and the advanced technologies used in production, the company's products with dignity stood the test of time.

Features of the system and technological solutions

Let's list the main features of the Bicon systems used for dental implantation:

• the length of the implants Baikon never exceeds 0.8 mm if compared with other manufacturers, whose length is at least twice as large;
• stability of the implanted product is ensured by its width, which is several times greater than conventional elongated pins;
• bone tissue and gums will be minimally traumatized, as the size of the implants is very small;The
• design fits very well with the bone;
• prosthesis is installed without special complications, the procedure does not imply any special effects;
• the probability of rejection of titanium material is close to zero, due to the high quality of the alloy recommended for medical use;
• hygiene of the oral cavity can be provided to a large extent, due to the lack of screws or any other fixing elements.

What models are in the range?

Bicon produces three main versions of the system for dental implantation:

• The Short series has a diameter of 4.5-6 mm;internal connection - 3 mm;length - 8-11 mm;
• The ruler Max 2.5 has a diameter of 4-4.5 mm;internal connection 2,5 mm;length 8-11 mm;
• Narrow have a diameter of 3-4.5 mm;internal connection - 2 mm;length - 8-11 mm.

Three-millimeter

products Implants with an internal joint of 3 mm are considered to be the shortest. Such devices were designed with a uniform pressure distribution on the dentition. Also, during development, consideration is given to the course of various biological processes in which the implanted artificial root will be involved.

A short titanium rod is developed in the form of a cone-shaped connection of a sufficiently high density, preventing the entry of harmful bacteria into the dental hole.

The stability of this design is achieved, primarily due to the relatively large area of ​​the joint. The titanium root will be completely immersed in bone tissue, thanks to the design features. The stability of such a system will be significantly improved, due to accelerated bone formation around the rod. In addition, such an implant does not affect the alveolar nerves.

Gold middle

Products with an internal diameter of 2.5 mm are designed specifically for implantation in the anterior region of the jaw arc. However, the possibility of installation on other sites is not excluded.

The neck design has a conical shape, which gives the product more strength. The internal diameter is characterized by the so-called increased retention.

The connecting process is carried out in such a way that it remains possible to remove the abutment and reinsert it, if necessary.

The smallest

Products with a 2 mm joint are used for installation in the front of the lower jaw in those conditions where the space between the teeth remains very small. The cervical of the prosthesis is designed so that with a tight adhesion with the abutment, a diameter of at least 3 mm is obtained.

Installation procedure

First of all, a preliminary examination of the oral cavity of the patient is performed, according to the results of which suitable prostheses will be selected. The doctor should be able to anticipate the possible undesirable consequences and study possible contraindications to the procedure of implantation.

In some situations, it is necessary to create diagnostic models individually for each patient. The information obtained as a result of computed tomography is often used.

To create a plan for prosthetics, an individual surgical template is created.

The patient is then given a local or general anesthetic. Next, you need to prepare a place to install artificial teeth.

Implant implantation takes relatively little time, it will take a maximum of one hour. Such operations are performed only with the use of anesthesia.

No sensations of discomfort in the patient will not arise. More unpleasant sensations can deliver the process of removing a sick tooth. Once the implant has been installed, a fixed restoration procedure can be performed.

The duration of the healing process will be approximately 3-6 months. After this, the temporary abutment can be removed from the implant, and a permanent one can be mounted in its place.

This procedure will not cause any pain. In addition to local anesthesia, other types of anesthesia can be used. Postoperative minor pain can last about 72 hours. If you can not tolerate pain, it is better to use special analgesics.

Some features of implantation

Implants are connected to abutments without any screws. A conical joint helps to increase the stability of the prosthesis.

Since the limiting faces are not provided, the abutment can be rotated 360 degrees, so that the most optimal arrangement of the entire tooth in the complex can be achieved.

The main task in the process of manufacturing implants is the correct selection of the abutment's leg. Bicon products involve the use of as many as six sizes. Bicon abutments are designed in such a way that they can be put on any kind of crowns.

List of advantages of

The list of advantages of Bicon implants is very extensive:

• the duration of the implantation procedure is much less than with the installation of conventional oblong prostheses;
• the titanium root will take root in the shortest time and remain firmly fixed in the bone tissue;
• for such implants, there is no need to build up bone tissue;
• during the recovery period there will be absolutely no complications;
• artificial teeth have a high enough aesthetic appeal and are reliable during operation;
• as soon as the prosthesis is implanted, it can be fixed without delay, so the patient will not experience any discomfort due to the absence of a crown after the implant has been inserted;
• soft bone tissue will be traumatized with minimal probability;
• for such pins can be used, both a one-stage and two-stage installation procedure.

Practical experience - view of patients

Reviews of patients who have chosen Bicon implants.

The cost of treatment

The cost of implants can be determined depending on the model, the complexity of the preparatory work and the level of the dental clinic serving patients.

Average prices for the installation of a single Bicon implant depending on the internal diameter:

• 3 mm - 20,000 rubles;
• 2,5 mm - 27,000 rubles;
• 2 mm - 30 000 rub.

All products are of a sufficiently high quality level.