Belacin (silicate cement): instructions for use, price

Dental agent Belacin is used for dental fillings when defects are located on the vestibular and contact surfaces.

It is important to know the peculiarities of its use not only for dentists, but also for patients.

Composition and properties

Silicate cement Belacin, produced in the form of a set, in which powder and liquid:

1. The filling powder is made from the smallest amino acid glass with a small amount of different fluorides. The fluoride in the powder prevents the destruction of the adjacent material to the tooth.
2. Liquid is orthophosphoric acid of low activity.

In addition, Belatsin is produced in several shades to match the color of human tooth enamel. Shades are divided into groups A, B, C, differ according to a special scale.

Instructions for use

If Belatsin was stored at a low temperature, then before use it must be warmed up to room temperature, leaving it in the room for one hour. Due to the fact that this silicate cement has abrasive properties, it is necessary to prepare the composition on a smooth plastic or glass surface, stirring all the time medical spatula.

The most suitable temperature for mixing the product is 18-22 ° C and humidity not more than 60%, but not less than 40%. To cool the cement, 23 ° C is sufficient.

A strong and reliable seal can be made by mixing the proportions: 0.12-0.16 grams of powder and 0.07-0.08 grams of liquid. First, you need to pour liquid on a smooth surface, and then carefully add the filling powder into it, slowly stirring and rubbing for one minute. The resulting cement slurry should shine and not stretch, since the prepared high-flow agent hardens for a longer period.

It is necessary to apply the filling in the cavity one and a half minutes after preparation, otherwise it will harden and nothing can be done. Already on the tooth, the filling hardens more slowly - within 5 minutes after application.

For the final hardening for 2 hours, you can not eat or drink anything.

What can and can not be done after filling, there is separate article.

A fixing layer is applied to the finished filling Axil.

Manufacturer and price

Dental manufacturer filling agent Belatsin is VladMiVa (Russian company). The price of this tool in different regions of Russia ranges from 220 to 400 rubles.