How to make a palm from plastic bottles - a step-by-step instruction on creating a product with your own hands

A spectacular and eye-catching palm from bottles will serve as an excellent option for decorating a summer house, a garden plot, a yard or a kindergarten. Manufactured by its own hands on an uncomplicated scheme, it not only beautifies the surrounding area, but also helps a person to utilize a large number of plastic containers.

How to make a palm tree of bottles with your own hands

Fans will put into practice the most incredible fantasies, like a master class, how to make a palm from plastic bottles. For a tree, dark brown containers are suitable as stem blanks and green to make leaves. If there is no green container, it can be replaced with a variety of colors: blue, yellow, red. For the trees will be useful containers for kvass, carbonated sweet drinks or beer.

The principle of creating a palm tree differs depending on what the craftsmen have found. To form the trunk, you can use a circular support made of wood, where the bottoms are nailed or a cable with a wire, where the containers with cut bottoms will be simply threaded, is suitable. The leaves are puffy and long. If you want to get palm trees, then cut them, cutting and bending, and stretched leaves thread on the cable.

The size of the bottles depends on the area of ​​the leaves and trunk, but do not get carried away and use a 6-liter or 20-liter container from under the water. Much more neat looks a tree of 1.5 and 2-liter plastic containers of different colors. Corks from them also serve as decoration material - they decorate the base of the palm, you can make them a mosaic for the flower beds, the walls of the houses for children.

How to make palm leaves

To make a spectacular palm tree with your own hands, you need to pay attention to the making of its leaves. To make them, you need:

1. Cut the green bottles with scissors in half, cut the top part with longitudinal strips, so that the neck of the narrow diameter remains whole on the half-finger from the lid. The thinner the cut strips of plastic, the more magnificent the crown is and the more natural it looks on the photo.
2. Taking the cans for the leaves is not necessarily the same - it does not affect the appearance. Obtained blanks must be strung on a prepared hard high-voltage cable of a diameter slightly less than the neck to produce one lush leaf. The number of leaves varies along the prepared holes on a metal pipe used as a support. Then they should be fixed on the barrel.

Step-by-step instruction for the manufacture of the trunk of the bottle palm

The next detail in the question, how to make a palm from plastic bottles, will be the trunk. Step-by-step instruction:

1. The barrel is made of dark brown dense containers, from which the bottom is cut directly along the contour.
2. Then the resulting workpiece is cut before the inward-shaped petals-segments are simulated, simulating a bumpy trunk. They should be cut 2/3 of the height, without touching the tip.
3. Make the right number of segments, depending on the desired height of the plastic palm.
4. When all the blanks are ready, you need to thread them on metal tubes. To do this, the container collapses slightly downward with the neck slightly to shift to create a beautiful bumpy trunk. The principle of stringing is similar to making a cone. After that, all parts are fixed.

Connecting individual parts and installing a palm on the

site The last point of how to make a beautiful palm from plastic bottles is to join all the blanks together. What you need to do:

1. Prepare a hard, solid base of a metal sheet about 40 * 60 cm in size and at least 5 mm thick to support the weight.
2. 2 metal rods with a length of 25 cm should be welded to the base or drill holes for fixing. They need to put on metal pipes of the required height - this will be the basis of the tree. At the same time, the diameter of the pipes is slightly less than the neck of the bottles for the trunk.
3. The upper part of the support will outwardly resemble a revolver drum, for this, 6-7 pipe segments are welded on them. Bottles for the trunk must be collected on rods, and palm leaves are inserted into the holes of the "revolver".To fix the cable inside them bends, is fixed from the top and inside the neck of the most extreme bottle. For the stability of the bottle structure and the concealment of the ugly lower part, the foundation is buried half a meter.

To create a bottle mini-palm that would decorate a room in an apartment, the following principles will be needed:

1. The trunk should be done this way: cut a third of the bottle from the neck, cut out on each part 8 of the petals-triangles, without touching the neck on the half-finger. Each segment is turned outward to receive flakes. The second half for economy is used similarly, but first the right hole is pierced with the red-hot knife.
2. Wide leaves can be made as follows: from the 1.5 liter plastic bottle cut off the bottom, the side part divided into 3 parts without affecting the neck. To give the segment the shape of the petal by rounding it at the end and tensing at the throat. To bend outward, cut the pieces from both sides, form a fringe so that the uncut middle remains a width of up to 1.5 cm. For splendor manually, shape each strip, bending consistently up and down.
3. Assembly is similar to a large palm, just use a simpler base.

Video: a palm from plastic bottles with their own hands