Over the past few years, multicolored silicone rubber bands, from which bright and stylish ornaments are made, have become extremely popular. Those who already have a little experience in this occupation, know simple patterns of weaving, for example, fish tail. Then the question may arise, how to weave a triple bracelet made of rubber bands. This accessory is a complicated version of the fish tail, it is also called "fishteel".It looks nice and interesting. About how to make the decoration "fishete" and other methods of weaving, you will learn further.
Step-by-step instructions and triple braiding patterns from a rubber band without a machine
The machine is a handy tool for creating stylish products with rainbow looms. He significantly expands the possibilities of the needlewoman, helping her to create truly sophisticated and original accessories. However, to weave a triple bracelet, the presence of the machine is not necessary. Even small children can cope with this task if they show instructions and relevant video lessons. There are several methods of weaving without tools: with fingers, with a fork, on a plastic slingshot that comes in sets of rainbow looms, using pencils bonded together.
How to weave the bracelet on the forks
The fork is a handy tool for weaving, for the reason that this flatware is at every house. To weave the accessory was more convenient, use a special hook that goes in the kit to the rubber materials. You will also need S-shaped clips that will fasten the ends of the product. Choose a color scheme: the main color will decorate the side of the accessory, and the remaining colors will be in the middle. In this master class were used:
- Two plugs.
- Hook.
- 42 black gum as the primary color.
- 18 rubber rings of six colors( dark purple, purple, bright pink, pink, pale pink, white).Together 108 pieces.
- Fasteners.
How to weave a triple bracelet of rubber bands:
- Colored silicone rings are arranged in groups for easy operation. Forks, lean back against each other so that the parts under the teeth touch. One will be on top, the other from below.
- On the right prong of the upper fork, fit a black loop, twist the figure eight. Put the loose loop on the outer notch of the bottom.
- Put another black ring on the two middle teeth, twist it again, place the second loop on the two central posts of the lower cutlery.
- Place the last dark rubber band on the left edge of the fork, similar to step 2.
- Place another ring of the primary color on the top cutlery.
- Start adding colored materials - firstly dark purple. To do this, put one of the two central prongs of the two forks on, the remaining two on the side bars. Twisting is not necessary. On all the prongs of the upper fork again, place the black rubber band.
- Repeat step six, but with purple silicone rings.
- Take the hook. Lower black rubber band, located on four teeth, grasp the tool, remove from the plug and release. Turn over the structure with the cutlery. Lower the layer of black rubber bands from the teeth.
- Turn the plugs over again. Raise the horizontal black rubber bands located on the four prongs, from under them pull the black rings from below. Remove from the poles.
- Take bright pink materials, repeat step 6.Remove the horizontal black ring from below.
- Turn over the structure, take off the bottom layer of rubber bands( dark purple).Replace the plugs in some places. Pull off the horizontal black gum, remove the dark purple hinges on the other side.
- Repeat step 6 with pink rings. Continue to weave according to the pattern, alternating colors.
- When the time comes to throw the last white gum, repeat step 6. Lower the black ring discard. Turn over the structure, remove the layer closer to the base of the plug.
- Return the instrument to its original position. Under the black horizontal gum skip the hook, pull the lower hinges.
- Wear the outer teeth and two medium ones with one black rubber band. Remove the horizontal bottom ring.
- Remove the remaining rubber bands: first horizontal, then pink, then white.
- Turn the forks over. Throw pink at first, then white loops.
- Move the black loops from one device to another - from the right to the right to the right, from the middle to the middle, from the left to the left.
- Turn the structure over so that the fork with double black hinges is on top. Lower the layer.
- Remove the hinges from the forks, put them on the clasp. Fix the ends of the triple accessory. Step-by-step master class, look at the video from YouTube:
How to weave on the slingshot
To make a stylish triple product on the slingshot, it will not take much effort. For the accessory you need two bags of silicone rings of contrasting color, but if you want you can use plain materials. To weave it was more convenient, take the hook. The ends of the product are fixed with an S-shaped fastener. How to weave a cute triple bracelet made of rubber bands on the slingshot:
- Take three single-colored rings, place them on one end of the slingshot. Twist the rings with a figure eight, put the second loop on the adjacent bar of the instrument.
- On top of the two ends of the slingshot, put on three rubber bands of a different color, without twisting.
- Hook the bottom hinges first from one bar, discard them. Do the same with the other party.
- Squeeze the white hinges down.
- Put on three silicone rings of the same shade as in the first step, on both ends of the slingshot, without twisting. Remove the lower hinges from the pillars.
- Repeat step two and three.
- Continue to dress materials until the product is the right length for you, do not forget to alternate colors.
- When the accessory is almost ready, fasten the ends with a fastener. Step by step the technique of weaving and all the steps look at the video:
How to make a triple bracelet from rubber bands and fasteners on the fingers
If you want to create a truly original accessory, use the following master class with a photo. For weaving you will need a set of loom bands, which will become the basis of the decoration, and many more fasteners. The length of the product is determined individually, depending on the circumference of your wrist. This method does not require additional tools. How to make an unusual and colorful decoration:
- Take one elastic ring, fold it twice. Put an s-shaped hook on top.
- On the other side of the hook, arrange one more ring, twisting twice. Hook another clasp.
- Continue weaving until the bracelet is the right length. When you place the last elastic, put on the hook, free its part hook on the opposite edge of the product.
- The first accessory is ready. Weave two more such products in the same way, the length should be the same.
- Now it will be necessary to connect the three parts. To do this, take one bracelet, on the sides of each circle, place it on the buckle. Attach the remaining two products by grasping the side edges with a free part of the s-shaped attachment.
- The original decoration is ready! For more details, see the video:
Weaving without a machine, only on pencils
Place two erasers or a folded napkin between two pencils, then tie with tape or cloth. You will get a tool reminiscent of a slingshot, thanks to which you can easily make an original accessory. Use multi-colored or one-color materials, show imagination - so the occupation will bring you much pleasure. How to make an original decoration:
- Place three rubber materials first on one pencil, twist by the figure-eight, on the second, put on a loose loop.
- Without twisting, place three more rings on top.
- Lower the loops slightly pull and remove from the pencils, letting them between the posts.
- Put on the following three rings. Again, fold the loops from the bottom.
- Continue weaving until the product becomes the required length. Step-by-step circuit on the roller:
A simple triple braiding scheme for the Triple Miami bracelet without the
"Triple Miami" is a great, beautiful accessory that will surprise everyone who sees it with the complexity of weaving. In fact, you can easily make this decoration using a slingshot, hook and rubber materials of three colors. Materials will need a lot: 99 white, 62 blue and 62 pink rings. For fastening suitable for convenient fastening in the shape of the letter S. How to make:
- One white gum-ring fold in half, place first with one pole of the slingshot, twist the figure eight, put the second loop on the adjacent end. From now on all materials must be taken in pairs.
- Two white rings, without twisting, put on top of the slingshot.
- To the right, discard in the middle two lower hinges.
- The top pair on the left is crocheted on the right post.
- Place one more white loop from above, without twisting.
- Lower the loops on the left in the middle, between the pillars of the slingshot. The beginning of the decoration is ready.
- Take the pink pair, repeat the fifth step.
- Remove the lower hinges from the left pillar. The pink loop on the right is moved to the opposite end of the slingshot.
- Repeat the seventh stage.
- Remove the upper white loop on the right from the post to the center. Pull the pink right eyelet to the next end.
- Repeat the seventh step, followed by the tenth.
- Repeat the seventh step, discard the white loop on the right.
- Put on white rubber bands without twisting. When putting on light rings, you will first need to discard three color, then two, three.
- Remove the three pink loops: one on the right, the remaining two on the left. Light the right loop to the right column.
- Repeat the thirteenth step.
- Throw off two pairs of pink rings. White loop from the left end to the right.
- Again do the thirteenth stage. Take off the three pink loops.
- Pull on both pillars a blue pair. When donning color materials, you will need to fold first one white pair, then two, again one.
- Remove the white hinges on the right, move the blue loops from the right column to the opposite.
- Throw a blue pair.
- Remove the two white loops.
- Move the right end of the blue rings to the left.
- Again, put on the colored rubber bands, remove the two white pairs.
- Repeat the twenty-first step, then the twentieth. Remove the remaining white loop.
- Then again there are white pairs. Repeat the steps from the thirteenth to the fifteenth.
- Do the steps from the eighteenth to the twenty-fourth, this time using pink materials.
- Continue weaving until the colored rubber bands run out.
- At the end there will be four white loops left, one on the right.
- Hook the four pairs of rings hooked( right and three left).After four loops, thread an additional white rubber band, the edges of the clip with a clip.
- Repeat the previous step with the remaining rings.
- Connect the ends of the bracelet. A stylish decoration is ready to learn how to do more, see the video:
Video tutorials for beginners on weaving a triple bracelet on the machine
Thanks to the machine you will be able to create great stylish decorations much faster and easier, which will please the original weaving and rich colors. There are many methods for making triple bracelets, which are successful for adults and small children. To simplify the task of creating accessories, many masters who have experience in this matter record video master classes. Visual step-by-step instructions give people the opportunity to seamlessly weave beautiful products. See fascinating videos that will help you improve the skill of needlework: