Several years ago, a unique and unique shape of the pipe nails became fashionable, which is modeled using artificial materials. It combines many advantages: convenience, beauty, practicality, elegance. From English the word "pipe" translates as a tube. The pipe nails during the simulation are compressed, becoming like a narrow tube. Correctly executed procedure of building is capable to correct even the most inexpressive form of a nail plate, having transformed them into elegant perfection.
Features of the shape of the nail pipe
Many girls resort to the procedure of building up, despite the urgency of naturalness and naturalness in the appearance of a woman. Long nails Pipe - an ideal option to emphasize the natural elegance of the hands. It is a strong, versatile shape with beautiful flawless lines. Simulating the pipe is a great way to make the fingers more elegant, elongated. However, such an increase can not be corrected.
The main feature of this form is the transverse arch of the nail, which is called the C-bend. In normal simulation, it is no more than 30%, and with a pipe - 50% or more. In this regard, the free edge gets the shape of a tube. This bend is created at the time when the process of polymerization of the material begins, but its structure remains pliable and soft. At this point, the nail is compressed in the stress zone on the sides, thereby giving the tip the shape of the arch. The sides of the nail plate should be parallel when filing.
When the paper template is fixed on the finger, it is necessary to slightly raise it so that the edge is facing upwards. Then the shape of the nail pipe will look unmatched. Modeling can only happen with acrylic or gel, it can not be done on tips. Pipe differs from other forms in that the tip can be formed in any way: almond-shaped, oval, styloid-like, square, rectangular. And all variants are perfectly polished due to a semicircular bend.
Methods of expanding the pipe
The shape of the nail pipe is very in demand, however, few masters master this technique perfectly. The artificial nail plate is formed with the help of gel and acrylic. However, many were convinced that the first material does not give the correct shape of the tip. In connection with this, only acrylic was previously used. But thanks to the development of the nail industry, many helium systems have appeared that meet the requirements of plasticity and strength.
Acrylic
Acrylic is an ecological, thermoplastic, wear-resistant polymer that hardens under the influence of air. This material is well subjected to modeling. By changing the reagent, you can correct the external properties of the polymer: transparency, pour point, density. Previously, this material was used to make dental fillings, which confirms its high characteristics.
With acrylic build-up, natural nails are pre-prepared: disinfection, degreasing, sawing and primer application. Next, under the nail is substituted form, folded cone. The brush is wetted in monomer, acrylic powder in the form of a ball. After that, the material is evenly distributed in shape, along the way constructing the nail design. The side edges are clamped with special tweezers. When the acrylic dries, the shape is removed, the nails are filed, observing the parallelism of the sides.
Helium
Gel is a polymer that has a high degree of photosensitivity. Under the influence of ultraviolet rays, solidification of the structure of the material takes place, while it turns into a solid medium from a jelly. Working with gel is considered more time consuming and requires special skill. The helium coating is more brittle, therefore, it is necessary to carry out the sawing less intensively than in the case of acrylic.
During the helium buildup, the nails are prepared for the procedure according to the classical scheme: disinfection, washing, application of a bond or primer. Next, a conical shape is substituted, a layer of base gel is applied from above, which polymerizes in an ultraviolet lamp for a couple of minutes. After the modeling layer, the nails are clamped with tweezers to obtain the bending of the side faces, sent to the UV lamp for a minute.
Then the shape is removed, the clamp is installed, so that the nails are shaped like a tube. After the final polymerization of the material in the lamp, the adhesive layer is removed, the nail plate is filed, degreased and covered with the finish gel. The last layer of the material should also be allowed to solidify in the ultraviolet lamp. After this, you can proceed with the design.
Step-by-step technique for modeling manicure
Simulation of nail pipe is not made on tips, but on forms. Strength is created not by increasing the thickness of the polymer, but by creating the correct geometry. After preparing the natural nail plate, it is necessary to substitute the shape, apply the material, modeling the free edge. At this stage it is important to make the full width of the future nail, which will affect the strength. After modeling the length, the cuticle zone, the free edge, the stress area, the "tunnel" line. The main criterion is the correct transverse arch, which is formed by clamping the sides.
Step-by-step technology of expanding the pipe:
- Natural nails are prepared for the procedure of building.
- Set the shape, apply the material, while simulating a free edge.
- The full width of the nail plate is displayed.
- The length is created, the tip is output to the oval.
- Model cuticle area, free edge, stress zone, "tunnel" line.
- Clamped with C-bend.
- Final polymerization of the material is carried out.
- Drunk an artificial nail plate, observing the parallelism of the sides. When cutting a free edge, the nail file should be held at an angle of 45 degrees to the sides.
- The surface of the nails of the pipe is sawed as the lower arch.
- Artificial nail plate is ground, polished.
- With a nail brush, dust is removed, a protective coating is applied.
Video training for nail extension at home
The advantages of accrued nails are appreciated by women all over the world. For several years the fashion for such a manicure has been preserved. Especially popular was the shape of the pipe, which makes the fingers more accurate. Is it possible to build nails at home? Each girl can learn how to model an artificial nail plate. Below is a video from YouTube, clearly demonstrating how to create a form of pipe. It reveals all the nuances of modeling that will help you master the technique. Before building up, you need to purchase the necessary materials.
Photo of the nail design pipe in 2017
The nails of the pipe look like a variety of design options. The most successful is a colored or white jacket that can emphasize an unusual shape. An excellent option is the Chinese painting, which is suitable for the spring-summer season. To make the nails are not so noticeable, the coating is applied with a single-colored, ordinary varnish. This is a great solution for the office. For the design of the nail plate pipe can be used lace, unusual patterns and ornaments, stones and other decor materials.