Knitted cardigan for women with knitting needles - diagrams and description with photo models of 2017 for beginners

A cardigan is called a knitted or knitted sweater, which is extremely popular with modern women of fashion. Such clothes do not belong to a certain season or age, it does not matter what form it will be - this is the universality of the cardigan. Knitted capes are very comfortable and the fashion for them will not work, it's stylish, this thing looks under any circumstances. The main thing is to be able to choose the right model.

Knitting patterns of female cardigans with knitting needles with description and schemes of

The modern dress code allows you to wear cardigans freely not only in an informal setting, you can even put on a shawl or sleeves even for work or solemn events. Young girls prefer to combine cardigans with jeans and t-shirts, creating an image in the style of "kazhual."Critics call the capes a modern mainstream, and the most relevant are long models. Many needlewomen knit cardigans on their own, as it is not difficult. This requires only yarn and knitting needles.

instagram viewer

Knitting cardigan knitting pattern with braided braids

This knitting pattern is provided for size 40/42( 36/38).Take 800-850 grams of Bandana thread from the manufacturer Junghans-Wolle or other similar in composition( 1: 1 cotton, polyester) and density( 90 mx 50 g).Knitting need eighth and sixth knitting needles. The density of the loops should be equal to 24 p.x 17 p. The face of the face is 10 cm2, the braid - 24 loops in height, 16 loops wide.

Wrong surface: IP - front lines, LP - reverse side.
Facial surface: LP - front rows, FE - purl.
Openwork strips and braids are knitted according to the scheme. In the purl stitches, which are not described in it, form the loops in accordance with the figure. Tie two capes like this: PI and crossed PI.The first two rows should be tied 1 time, then duplicate from 3 to 26 a row of the same knitting.
Eraser 1/1: one LP, PI, repeat from * - *.

Knitting Pattern for Cardigan:

Backrest. Type on the sixth knitting needles 112 pts and bind 6 lines of rubber band 1/1.Go to the eighth spokes, place the hinges as follows: the facial surface - 24 p., The tracery strip( AP) - 4 p., The braid - 16 p., The AP - 4 p., The middle pigtail - 16 p., The pivot 4 p., pigtail - 16 p., AP - 4 p., facial smoothness - 24 p. In the third line, reduce the blade by 1 loop from both edges, after - in each twentieth row, reduce 4 times = 94 loops. At the level of 41 cm from the hem of the cardigan from both edges in even rows complete for the armhole 1 x 4 loops, 1 x 3 loops, 1 x 2 loops and 1 over the loop. At the level of the armhole for the neck cut, close the central 16 loops, complete the sides separately. To make the neckline round, you need to finish in each even line 1 x 4 p. And 2 x 3 p. To create the shoulder bevels from both edges, complete 3 x 5 loops and 1 x 4 loops in each even line.
Front shelf. We type on the sixth spokes 66 p. We send 1/1 six rows of rubber. We pass to the eighth spokes, we distribute the loops as follows: 24 pcs of the facial smoothness, 4 loops of the AP, 16 pts of the braids, 4 pts of the AP, 16 pts of the braids, 2 pcs of the purlinae. In row number 3, reduce 1 loop on the right side, after - four more times 1 pt in each twentieth row. At a level of 35 cm from the hem of the cardigan on the left edge, remove 1 st for the bevel of the collar, after - another 9 x 1 loop in each subsequent sixth row, tying along with a simple broach 19 and 20 loops from the middle of the gear. At the level of 41 cm( right), form an armhole similar to the one that was on the back. At the level of the armhole at 21 cm, complete for the right shoulder slant 4 times in each even line 1 x 5 loops and 3 x 6 loops = 18 loops. For the seam, add 1 new loop to them, on the resulting 19 pt, tie the pattern to a height of 9 cm. Remove the hinges on the extra spoke or thread.
Right shelf. Knit symmetrically about the left shelf. To make a bevel for the neck, tie the PL together 19 and 20 loops from the front edge.
Sleeves. On the sixth knitting needles, type 54 loops, tie a 1/1 string with six rubber bands. Take the eighth spokes and place the hinges as follows: the facial surface - 13 p., The AP - 4 p., The middle braid - 16 pts, the AP - 4 pcs, the facial smoothness - 15 p. In the 7th row on each side,after - another 6 x 1 in every 14 rows, including those added to the face of the loop = 68 p. From both edges at 42 cm for the hose of the sleeves, complete in each even line 1 x 4, 1 x 3, 2 x 2 and3 x 1 loop. Then close in each fourth row 3 x 1 p., And in each second row 3 x 1 p., 1 x 3 p., 1 x 4 p. The remaining 10 sts also close. The second sleeve must be connected in a similar way.
Before collecting the details of the cardigan, strip them through a damp cloth and spread them around the pattern. Make the shoulder seams. Connect the entire knit to the back seam( loop in the eyelet) and sew it into the neck of the backrest. Connect the front and back parts to the sides. Sleeves sew in armholes.

Fashionable three-color cardigan in the style of Lalo Dolidze

A very popular cardigan from Dolidze is made from solid braids with the help of spokes. The length of this cardigan is 75 cm. For yarns, yarn, which consists of wool and acrylic( 49 and 51%), is suitable. You will need about 1.6 kg of threads of three colors = 6 /5/ 5 skeins. Try to pick colors that are in the scale in the neighborhood to get a beautiful smooth transition.

To obtain a color transition, first knit into three threads of the main color, then - cut one of them and tie a thread of another tone. After having drunk several centimeters, cut off the second thread of the main color and attach a thread of the second tone. When you are tying a few centimeters, cut off the last main thread and enter the second color. Thus, one tone is replaced by another.

To knit a female cardigan from Lalo Dolidze, two pairs of spokes of a circular type of 5 mm each with a length of 60 and 80 cm, an auxiliary set of 3 mm needles 40 cm long( for shaping braids), a knitting needle, markers, loop holders,loops. Do not forget to lock and prepare samples before starting knitting.

Legend:

.Knit LS: Edge;two purlins, 32 facial - thrice, 2 str.etc. and 8 persons.etc. Then close 16 loops in the middle of the armhole( 113 p. for the right side of the front of the cardigan).After knitting 8 facial, 2 purl, 32 facial - thrice, two purl and 8 facial = 222 n. For the back. Complete 16 central loops of armhole No. 2, then connect 8 facial;two purl + 32 faces three times and as many times 2 purl, edge( 113 loops for the left side of the front).Turn over the fabric and knit exclusively 113 loops of the left part of the transmission. For maximum convenience, go to the second circular knitting needles of 60 cm in length. Leave the remaining hinges on the previously used knitting needles.
The left side is transferred. Type the series( IS) as follows: Edge;2 facial, 32 purl - thrice, 2 facial, 8 purl. Close the 2 loops from the beginning of each face row twice - this is necessary to form an armhole. After that 4 times, reduce one loop at the beginning of each face row to get 105 loops. Continue to knit a pattern on the rest of the loops, remembering to form a cross braid. When the height of the armhole is 20 cm, finish with the wrong side.
Collar and shoulder. LS: knit the first 68 loops, with the braids of the braids tying 2 together = 36 p., Which should be transferred to the holder. Close the row for the collar, you should get 37 loops. Then knit only on the hinges of the neck, until its height is 10 cm. Complete the knitting in the purl series. The last front row is knitted so that the loops in each spit are joined to the right, and 21 loops result. Transfer the rest of the loops to the holder.
Backrest. Attach from the wrong side to the backs of the backrest another thread. Complete the two loops on each side twice( for the armhole).Remove 4 times on the loop on both sides to make 206 p. After - knit right until the height of the armhole is 20 cm. Complete the work in the purl series.
The neck and shoulders of the back. Tie 68 facial loops, in braids knit them in pairs = 36 points for the shoulder, close the central 70 sts, in the braids, complete the facial loops together for two. Tie the remaining 68 loops, tying the loops in pairs in pairs, to make 36 points for the second shoulder. Transfer to the holders of 36 loops of each shoulder( back).
The right side of the transmission. Attach the thread from the wrong side to the hinges on the right side of the gear. Complete the knitting details symmetrically to the left side, closing and cutting the loops from the wrong side.
Sleeves. Perform on the right sleeve to 16/16 to the right, on the left - to 16/16 to the left. Perform on the circular 60-centimeter spokes 53 loops. Next in the next row, knit 2 facial from each loop( one at a time, using the front and back walls) = 106 p. Perform the installation series( IC): Edge;two facial, 32 purl - thrice, 2 facial, marginal. Produce the first row( LS): Edge;two purlins, To 16/16 - three times, 2 out.etc., edge. Next, knit, crossing the braids. Add 1 loop on each side of each sixth line 10 times to get 126 p. Next, knit straight, so that the sleeve length becomes 45 cm. Complete the knitting in the purl series. Close four loops at the beginning of the next two rows, after - 3 loops at the beginning of the next two lines and 2 loops from the beginning of the next two rows = 108 p. Bind the number of decreases: edge, two faces simultaneously, crochet up to 3the last loops, then remove one, tie the front and draw it through the removed loop, complete the edge band = 106 p. Tie the purl series, repeating the decrements in each face row 9 times to get 88 n. Close at the beginning of the next 4 rows of threeloops, then - 4 in the next 4 rows = 60 p.the next row( front): edge, 5 times 2 loops together, 38 loops along the pattern, 5 times two loops together, edge = 50 p. Next make the purl and go to the LS.It is tied like this: edge, three times 2 loops together, according to the figure up to the last seven loops, two loops together three times, edge = 38 p. Next LB: edge, two purl together, pair of faces together 16 times, 2 purl together, edge =20 n. Similarly, tie the second sleeve.
The final stage. Make locking of the main fabric, sleeves. Dry the parts, but do not pull the braids. Move the hinges of the right shoulder from the holder to the knitting needles, fold them together with the faces, close the third knitting needle. Also close the eyes of the second shoulder. Remove from the holders on the spokes of the collar loops, connect them by grafting, using a knitting needle. Sew a collar to the neck, connect the seams of the sleeves and sew them into the armholes.

K16 / 16 to the left: remove sixteen loops before work on the auxiliary circular knitting needles and knit the next 16 from the face knitting needle. After - move 16 loops to the right along the line on the auxiliary knitting needles and knit them with the eyelets( in the braid with 32 loops).
K16 / 16 to the right: take sixteen loops to work on the circular auxiliary spokes, move the next 16 facial from the left knitting needle to the right along the line. Knit 16 loops with auxiliary spokes facing the face( in a braid with 32 loops).

Knitting Pattern:

Master Class for knitting a long cardigan with

buttons You will need 300 grams, 250 grams and 200 grams of yarn of different colors. It is better to stop on the composition of 87% cotton and 13% polyamide, density of 100 meters per 50 grams. Prepare the knitting needles at number five, the fourth hook and 5-6 buttons. All elements of the cardigan are knitted with a knotty type of edge, i.e. The first loop of each row is removed as the front one, and the last one is tied with the front one. On the right side of the edge loop, loop the 2 loops together with the front hinge and follow the broach on the left before the chrome.etc.( remove 1 loop as front, tie 1 faces, etc. and pull it through the removed loop).

Detailed knitting pattern for a simple cardigan:

Back. Type on knitting needles 122 n. Of color # 2 and tie 2,5 cm( seven rows) with garter stitch to create the bar, and start better with the purl series. Next, knit the facial smoothness. To form bevels on the sides, loosen the loops, starting from the bar in the 7 row 1 point and in each sixth row 16 times the 1st. After 28 cm( which is 68 loops from the bar), knit 1,5 cm with gilt stitching № 2 and 1,5 cm № 3.After - tie the front face in tone No. 3.After 21 cm from the transverse band( which is equal to 50 rows), tie for the second strip of one and a half centimeter in tone No. 3 with garter stitch and the same color No. 1.Continue to use the third tone when knitting with the facial smoothness. After 4 rows of the second strip, close for the armhole 3 p. From each edge and in each second row 1x2, 3x1 p. After 21.5 cm from the 2nd strip( which is equal to 52 rows), close the hinges.
Left and right shelves. Type 62 loops of color number 2 and knit, alternating patterns and shades, as did with the back. By the same scheme as on the back, make on the right armhole and bevel. Simultaneously with the beginning of the armhole, close the bevel of the neck on the left with one loop, in each even row of 4x1 p., And in each fourth row - 10x1 p. Complete the remaining 22 pts.
Sleeves. Make the shoulder seams. From the edges of the armhole with the help of threads of the first color, type on circular knitting needles 74 sts, knit the front surface, starting from the purl series. Reduce the sleeves for the bevels from the two sides 1 st in the sixth row and in every eighth 12x1 n. After 49.5 cm from the beginning of the sleeve( that is 119 r.), Connect for the strap 2.5 cm( this is 8 rows) of garter stitching,after - close the hinges.
Assembly. Make the seams of the sleeves and the side. By means of a hook, tie the edges of the shelves and the cutout of the gate with one row of posts without the crochet, and 1 by the row of knitting the "stepping step" with the thread of the desired tone. After 29 cm from the bottom edge of the cardigan on the right shelf, form a hole for the button( in 1 row), using 2 air loops. The remaining 4 holes make with intervals of 5-6 cm. Sew clasps.

Warm female cardigan made from thick yarn of large viscous

A stylish cardigan style is made using 25 mm spokes and very thick woolen yarns of the Big Loop. To connect a warm flywheel you will need two skeins of yarn, circular knitting needles 25 mm in diameter and 80 cm in length, as well as 20 mm and a length of 60 cm. The approximate density of the mating will be 3 p / 10 cm. It is better to knit as tightly as possible,did not stretch. Keep the cardigan folded.

Schematic:

Backrest. Type 18 p. On the circular pins 25 mm. From the first to the 37th rows, knit the facial smoothness. The 38th row begins with 9 facial and, so that the remaining 9 items do not bloom, transfer them to circular needles of 20 mm. Continue to 9 p. 25 mm with knitting needles.
Front right side. In the ranks 39 through 74, knit 9 loops each. At the end, close the 9 loops.
Left side. Throw 9 p. From 20-mm spokes to 25 mm and crochet from 39 to 74 rows of facial smoothness, then close 9 loops.
Sleeves. The backrest and the sides of the transfer are folded in half. Count from the shoulder 7 rows in both directions. Raise 14 sts on circular spokes 20 mm and tie 8 circular rows with the facial smoothness( on the front side should get the purlina smooth, and with the purl face - the front).
Close all the hinges, complete the side seams, letting go of 10 cm for the cuts.
If you want, you can make a cardigan short or long, taking away or adding the necessary number of rows.

Beautiful cardigan from a mohair with a hood

The cape with a hood not only warms in the autumn, but also decorates even the most simple female outfit. Due to the original contrasting combination of yarn colors and beautiful interlacing, the cardigan looks very unusual and beautiful. The style is equipped with chest straps that form an elegant, refined silhouette. The proposed scheme is suitable for the manufacture of a product size 38/40.You will need 350 grams of melange mohair yarn, 250 g of terracotta, 100 g of violet, sixth knitting needles and a fifth hook.

Notes:

The "knob" pattern: double tie the pattern( 1 face and 1 purl loops), turn, loop 2 times the two loops together in the wrong way, turn, 2 times tie 2 pcs along the front.
Pattern from medallions and "shishechek"( use terracotta yarn): rows No. 1, 3, 7, 11, 15 are knitted with facial smoothness along 13 loops. The second and all purl rows are joined on 13 stitches with the purl stitch. In the fifth row, 6 hinges should be crossed to the right, make one front and 6 pts cross to the left( = leave 3 p. On the auxiliary spokes before work, make 3 facial and tie all facial loops on the auxiliary spokes).Provyazhite further 1 front, then 6 points cross to the right( = leave 3 p. On the auxiliary spoke at work, make 3 facial and tie all facial on the auxiliary spokes).Make number 16 as the second. Repeat all the rows from the beginning.

Schematic:

Backrest. Type on the sixth knitting needles knitted mocha yarn 65 pcs, knit with the wrong side and the above pattern, replacing the yarn: 6p.melange, 13 p. terra cotta, 27 p. melange, 13 terra cotta, 6 p. melange. Tie in a forward direction of 68 cm and close the hinges.
Left and right shelves( will be symmetrical).On the sixth spokes, dial 32 loops( melange), tie with the wrong side and pattern, alternating the strands: 5 st. Melange, 13 terra cotta, 14 st. Melange. At a level of 48 cm, close in each second row 7x1 p. - this is necessary to form a bevel cut. After 68 cm from the beginning of the cardigan cloth, close the remaining 18 loops. Do the right shelf on the same principle.
Sleeves. On the sixth knitting needles, make 45 pcs of melange yarn and knit with the wrong side + pattern, alternating colors: 16 pcs of melange, 13 pt of terracotta, 16 pcs of melange. After 45 cm from the beginning of the workpiece, complete from both edges in each even row 8 x 2 p.( To form the bevels of the sleeve).At the level of 60 cm, close the remainder - 13 p.
Hood: Using a mélange mohair spinner, dial 2 loops on the sixth knitting needles and knit, adding to each 4th row 3x1 pcs, to each second 3x1 pt, 4x2 p. After 13cm( from the beginning of the part), loosen the hinges. Knit the second half of the hood for a cardigan symmetrically. After - turn over the hinges laid on the knitting needles, type in an additional 10 loops between them, distributing the yarn tone and pattern as follows: 12 pt. Melange, 13 terra cotta( pattern), 10 mélange, 13 terracotta( pattern), 12 mélange. To create a rounding, end on the back of each even line 4x1, 1x2, 1x3 n. After 54 cm, close the remaining loops and make a seam.
Assembly. Form the shoulder seams, attach the hood to the neckline of the collar and partially to the sides of the shelves. For the plank, dial the 6th needle 6 pt.( Purple tone), knit with garter stitch, attaching the bar to the product. For this, tie two loops together from the side of the inside of the work. By this method tie in a circle. Sew up your sleeves, make side seams. For each shoelace-string, type 6 loops on the sixth knitting needles and bind 120 cm, after which they must be sewn to the bar. Bind the cardigan and cuffs with the help of the technique "rasche step"( or "gum"), using a melange thread and a fifth hook.

Stylish cardigan coat with pockets for autumn

Depending on what size you have, you can choose the following parameters for knitting: OG: 126 cm - 136 loops, 108 cm - 116 loops, 100 cm - 92 loops. The length of the cardigan: 95 cm - 97 p., 91 cm - 93 p., 87 cm - 91 p. The length of the sleeve along the inner seam: 48 cm - 49 p., 47 cm - 48 p., 45 cm - 46 p. Forcreating a stylish knitted coat you will need a melange acrylic-wool yarn like Novita Ruska( up to 900 g), knitting needles 6 and 7, 8 buttons.

Notes:

Elastic band 1x1: alternate one loop of "face" and "reverse side".
The density of the facial surface on the seventh spokes 17 r.x 13 points will be 10 cm2.

Knitting Pattern "Trapezium":

Backrest. Type on the seventh spokes corresponding to your parameters the number of loops( this is indicated above) and knit a 3.5 cm rubber band pattern 1x1.Next, knit the front face( LH), in the first row, removing 4 p. At a level of 9 cm( 9), 10 cm( 10), 11 cm( 11), remove both sides of the loop to create lateral bevels. Do it this way: in the front row, tie 2 facial, 2 loops together "face" broach, again facial until until the end of the line there will be 4 loops left. Next, tie a pair of loops together LH and make a pair of facial loops. Repeat this every 6 cm three times, after which - every 9 cm, too, three times. At the level of 69 cm( 70), 71 cm( 72), 74 cm( 75), complete for the armhole on both sides in the even lines 1 × 2( 2) 2( 4) 4( 4) loops and 3( 3) 3( 4)4( 4) x 1 loop. After - knit straight. At the level of the armhole 16 cm( 17) 18 cm( 19) 19 cm( 20), close the gates for the cutout with a mean of 24 cm( 24) 24 cm( 24) 26 cm( 26) hinges and complete separately on both sides. To make the cutout round on the inside, remove the loop in the next second row. At the level of the armhole 18 cm( 19) 20 cm( 21) 21 cm( 22) close the hinges 12( 15) 17( 17) 19( 22) in one step. Knit the second half of the neck symmetrically.
Left and right shelves. On the seventh needles, cover 44( 47) 49( 52) 55( 58) hinges, fasten 3.5 cm pattern rubber band 1x1.Next, knit LH, evenly taking 2 nd in the first row. Last 9 loops from the left side continue to knit with an elastic band - this will serve as a strap for the buttons. At the level of 9 cm( 9) 10 cm( 10) 11 cm( 11), form a side bevel on the right, reducing the loop as follows: in the front row, knit 2 facial, 2 loops drawing together, and the remainder according to the figure. Repeat the reduction three times every 6 cm, then three more times every 9 cm. At the level of 69 cm( 70) 71 cm( 72) 74 cm( 75) complete on the right side for the loop hinge 1x 2( 2) 2( 4) 4( 4) and 3( 3) 3( 4) 4( 4) х 1 in even lines. At the level of the armhole 8 cm( 9) 10 cm( 11) 11 cm( 12) from the left side, take the last 13( 13) 13( 13) 14( 14) hinges to the collar cutout pin. To round out the cutout, lower the 1 x 2 and 3 x 1 loops from the left side of each even row. Close at one time at the level of the armhole 18 cm( 19) 20 cm( 21) 21 cm( 22) the remainder - the loop of the shoulder 12( 15)17( 17) 19( 22).Perform the marks on the bar in the areas where the buttons will be located, taking into account that the upper fastener will be placed in the center of the collar strip. The remaining buttons will be located with a ten-centimeter gap. The right shelf is bound in the same way. However, on the strap of the buttonhole loop, tie as follows: 4 st according to the picture, make a crochet, tie another 2 loops together and finish the row.
Sleeves. Type on the seventh spokes 38( 38) 40( 40) 42( 42) loops and bind 5 cm pattern rubber band 1x1.After - knit LG, in the first row, removing 4 loops. At the level of 15 cm( 16) 16 cm( 16) 16 cm( 17) add hoses for the bevels along the loop from both edges. Repeat the addition every 6( 5) 4.5( 4) 4.5( 4) cm for another 4( 5) 6( 7) 6( 7) times. At the level of 45 cm( 46) 47 cm( 48) 48 cm( 49), complete the sleeves on both sides for all the even rows of 1x2( 2) 2( 4) 4( 4) loops and 3( 3) 3( 4)4( 4) x 1 loop. The remainder of the loop is closed one time. Tie the second sleeve as well.
Assembly. In the horizontal plane, stretch all the connected parts of the cardigan according to their dimensions, moisten with water and allow time to dry. Form the shoulder seams. From the edge of the collar for the bar on the sixth spokes, draw 87( 87) 87( 87) 91( 91) hinges, taking into account the pending loops of the shelves. Next, knit with an elastic band 1x1.Having reached the level of 1.5 cm, sew a buttonhole( like the previous ones).At the level of 3 cm complete all the loops, after - make lateral and sleeve seams, stick the sleeves into the armholes. Sew the buttons to the cardigan.

Lightweight openwork cardigan without buttons with a summer scent

The presented diagram is taken from magazines on knitting. To create a cardigan you will need: up to 700 g of blue yarn. The optimal composition for the summer model is 40% cotton and acrylic and 20% polyamide. Another take the fourth and fifth spokes, the fourth hook. Do as many crochets as you put together on 2 loops, and vice versa. The knitting density of a cardigan should be 29 p.at 16.5 p. = 10 cm2.

Notes:

Openwork pattern: width 14 p.( Bind them according to the scheme, where only persons are indicated).In the purl series, knit along the pattern, making the dressing upside down. Duplicate the rapport loops, after which make the final loop. From 1 to 12 lines, do this 1 time, after - duplicate the binding from 7 to 12 row.
Bars without crochet start to knit not from the 1st st.b / n, and with an air loop.

The scheme of fast knitting of the summer cardigan:

Backrest. Type 73 loops and knit between the edges of the openwork pattern. After 26 cm from the base finish for the armhole with both edges 1 x 3 loops, then in each even line 1x2 n., 1x2 and 3x1 loops. After 43 cm from the base finish for the bevels of the shoulder on both sides 1x3 p., After - in even lines - 3x3 p. In parallel with the base of the shoulder bevel, complete the middle 19 loops for the collar cut and finish both sides. From the edge of the gate close in even rows of 1x3, 1x2 n. At a level of 45 cm from the edge, close all the hinges.
Right shelf. Throw 67 loops and knit between the edges of an openwork pattern. After 7 cm from the edge, close the 1x6 loop to cut the collar, and in each even row - 2x4 loops, 4x3 loops and 2x2 loops. Then continue to close in all the even lines of 1x2 and 2x1 loops, in every fourth line 5x1 and the eighth - 6x1p. Form the armhole and the bevel of the shoulder at a time at the level of the back. Complete all the loops. Remove the left shelf in the same way.
Sleeves. Throw 33 knitting needles on the knitting needles and knit between the edges an openwork pattern. For bevels, add 11x1 n. From each of the two edges in each eighth line and 6x1 n. - in every sixth, including the loops added to the pattern. After 45 cm from the edge of the cardigan, complete both ends of the 1x3 pcs. For each shell, 1x2 and 6x1 pcs for each even, 5x1 p. For each fourth, and 5x1 p. For each fourth, 1x2 p., 1x3 p. After 62 cm from the beginning of the cardigan, close the remaining hinges.
Belts. Form a chain of air loops of 36 cm and on it, knit art.without a crochet. After 5 cm, finish the part. For the left belt, tie the chain in the same way as the right one, but 90 cm long.
Assembling the parts. Make the shoulder seams. Form vtachki, attaching the shoulder seam to the middle of the cardigan, and sew the sleeves on the pellet. Bottom of the cape 3 cm of st.without a crochet, from the front edge to the center of 14 cm, and from the center - up to 76 cm.without a crochet. Sew the ovaries to the edges of the shelves with a short part, prisosdiv them.

Youth cardigan with long sleeves from yarn grass

For knitting cardigan you will need: 0,5 kg of blue acrylic yarn, a kilo of blue thread "Grass", the second hook, spokes number 2,5.Knit a cloak follows, alternating acrylic yarn with "grass".Change the threads every 10 rows."Grass" knit with a handkerchief pattern, acrylic yarn - stocking motif. After 105 cm from the starting row, divide the work, tie the shelves and the back separately.

Knitting pattern of an interesting cardigan from "Travki":

Back. Type 250 loops( "Grass") and tie 10 cm facial smoothly with a handkerchief pattern. After - continue with acrylic threads, using stocking, after 10 rows again change the appearance of the yarn. In each row, complete for the armhole on both sides 1x5, 2x2, 2x1 loops. At a level of 122 cm from the bottom edge of the cardigan, close the middle 30 ply for the gate and end the two halves separately. To round the neck, finish in each line 5x2 p. From the back side. In the same way, finish the other side.
Shelf. Complete the hinges for the armhole, as was done on the back. After 115 cm from the beginning of the mating, close for the neck in even lines - 1х15, 5х2, 5х1 п. Having reached 125 cm from the first row, complete the shoulder loops. Tie the second shelf in the same way.
Sleeve. Type 80 loops with "grass".Thread alternate, as was done on the back. At the level of 42 cm complete in each line for the pellet sleeves 1х5, 2х2, 18х1, 4х2, 1х5 loops.
Assembly. Make the shoulder seams. On each side of the neck, cover the collar loops. Knit it with a "grass" of 12 cm, using handkerchief. Clutter the shelves with a hook using the same threads, make 3 air loops, sew buttons. Make lateral, sleeve seams. Sew ready sleeves into armholes.

Description knitting cardigan with sleeves bat

Cardigan with a collar-rulik knits an entire product diagonally( in the transverse direction).For a 46-48 cardigan, 325 grams of black yarn, 75 g of pale gray( melange) and 50 g of graphite cashmere yarn will be needed. Also prepare the seventh straight spokes, hook 3,5, circular needles No. 7 and 5( 100 cm long).Knitting density of 21 r.at 16 p. will be 10 cm2.Cardigan knit in the direction from one sleeve to the second, starting from the left edge.

Scheme:

Throw on the seventh needles 60 sts with threads of black color and knit LH.After 12 cm from the beginning of the mating, puncture 1 pt from both edges, after - in each subsequent fourth row of 8x1 n., For rounding add to each even row 15x1 n. After re-type 2x4p. In the next front line on the right, type 58 loops for the backrest, for the left for the left shelf - the same number of loops. Knit with knitting needles # 7 straight at the width of the shoulders. After 21 cm from the initial edge, divide the work to cut the collar in the middle. Set aside 120 p. To the left of the edge of the work for the shelf. At 120 sts to the right of the work edge, knit a straight back. After 14 cm, postpone these loops.
Continue knitting on the laid-off 120 sts of the shelf, typing 15 pt on the right. 14 pts from the beginning of the collar, tie the stitches with connecting stitches. To do this, put the first loop on the hook, enter it into the next loop, pulling out the thread and extending it through the loops on the hook. So tie it to the end of the row, trying to do the work evenly.
Type for the right shelf black threads on the seventh spokes 135 p., Knit LH.After 14 cm close for the collar to the right 15 p. Set aside 120 pts backs and tie in the work 120 p. Of the right shelf. Complete the part from 240 points symmetrically to the beginning, adding new loops instead of removing them. After the final row of the sleeve, tie the loops with connecting stitches for both the left shelf.
For assembly, spread the cardigan over the pattern, sprinkle with water. Allow to dry. Carry out the back seam of the neck so that it is on the wrong side. The inner edge of the collar is connected to the neckline of the neck, sprinkling it.

How to choose the right yarn and needles

The main rule when choosing yarn for a cardigan is that the spokes should be twice as thick as threads. Each set of spokes has a serial number and differs in diameter. Thus, the diameter of the fifth spokes is 5 mm. The strongest are steel tools. They do not bend and do not leave lumens on the knitted cloth. Plastic spokes are ideal for soft yarn. Aluminum are considered to be the lightest, but are not suitable for knitting with light threads, as they can stain them. The spokes are divided into open, closed( on one side a ball), and round, connected by a thin bundle. Features of yarn for knitting cardigan:

Angora. It is not used in its pure form, because it is expensive and not very beautiful. This warm, fluffy material is a part of merino wool, acrylic.
Alpaca. The wool of alpaca and llama has about 20 tones: from white to black. The main advantage of this type of yarn is that it does not fall down and does not form spools. Alpaca is very dense material.
Cashmere. As angora, it does not apply for knitting in its pure form. He is prone to the appearance of pellets, friction. Cashmere is added to the wool, giving the yarns elasticity and softness.
Cotton. The yarn is heavy, inelastic, often sits when washing. However, it is beautifully painted. In a cotton cardigan it will be very comfortable even at sub-zero temperatures.
Merino wool. Optimal for knitting children's things, because it is very soft. Pure merino wool is expensive to reduce the cost of yarn, other types of fibers are added to it.
Wool. It keeps the heat well, but it quickly produces pellets. Wool is stretched during washing. Often used in combination with acrylic( for example, yarn "Jacquard").
Chinchilla. A very delicate yarn that contains chinchilla fur. Ideal for knitting pattern "Asian spikelet".

Video lessons on knitting cardigan with knitting needles for beginners

How to choose the right outfit in capricious weather conditions? After all, it's often cool in the morning, and it's warming during the day. Knitted cardigans are very practical and convenient, they perfectly warm, complementing the most diverse images. With the help of a stylish cape, a woman can not only warm herself, but also cover up the flaws of the figure or emphasize her dignity. Some models of cardigans effectively emphasize the waist, others - "pull out" the silhouette, making it slimmer. After watching the video lessons below, you can learn how to knit a simple, beautiful cardigan for the fall.

Female sleeveless cardigan-sleeveless vest

Lengthened cardigan with raglan bottom

How to knit a cardigan jacket with garter stitching with your own hands

Fashionable styles of female cardigans knitted with needles - photo 2017-2018

The catwalk is full of different styles of women's knitted cardigans. To create stylish warm or light capes, designers use all kinds of machine patterns, weave: "honeycomb", "zigzag", "spikelet", "burn", "bridges", etc. In 2017, the most demanded is the length below the hip, minimalism inadditional decor. Of zippers are widely used zippers, buttons, ties. Look below photos of fashion models of knitted female cardigans from the collections of 2017-2018, to determine the choice of the product for yourself.