Bactus with knitting needles - schematics and description

The triangular scarf baktus - once an integral part of the national costume of one of the northern peoples, and now a favorite item of clothing for women, menand children in the cold season throughout the world. With the help of bactus, you can not only protect your neck and chest from the cold winds, but also to diversify the habitual outerwear. Several types of bactus in the wardrobe will give room for imagination and inspiration in an uncomfortable time.

The easiest way to get a special bactus is to tie it yourself. We are ready to help in this by offering several variants of schemes and descriptions of the matings of different models of this beautiful and warm kerchief.

How to bind bactus with knitting needles?

Knit bactus can not only professionals, this original scarf is quite possible to tie in and beginner. For this purpose, the simplest mating - a handkerchief is suitable. The length of the triangle of the bactus varies from 40 cm to 140 cm, depending on the idea. The width of the bactus on average can be from 25 to 45 cm. After all, from a simple scarf it's easy to make a shawl or openwork handkerchief - you just need to.

Master class for beginners

Before you start this, remember: newcomers are lucky. Moreover, in such a useful matter! Let's try to connect the bactus with a garter stitch 180x50 cm. The density of the mating will be 18 loops / 32 rows = 10/10 centimeters.

For our bactus for beginners, you will need:

• 300 g yarn - wool or wool / acrylic( 100 m. / 50 grams)
• Spokes ordinary( if you later want to sew) or circular - 4 cm
• Hook 4.5 mm - optional

Бактус спицами - схема и Description для начинающих:

Let's start knitting from the main edge( the top point of the figure).
Need to dial 6 spokes on the spokes, tie 3 facial, 1 purl, 3 facial. We knit further according to the scheme, beginning with the 1st row.
From the 1st to the 6th rows we knit according to the scheme: that is, on both sides of the knitting, in each face row we increase the number of loops by 6: in each facial we make nakidy and increments.
We knit this way to the required length - 180 cm, then closes the hinges.
To decorate the bactus with brushes in the corners of the kerchief, you need 80 pieces of yarn in length of 30 cm. From them you will get 3 brushes with a length of 15 cm.

To make the crocheting, you need to leave the hinge when there are 373 loops( 123 rows) on the spokes andTo work by a crochet so: 2 p. From a knitting we knit СС, then to lift п. and to make 1 пико( 3ВП, 1СБН in 1ВП) - so we repeat 60 times. Finish the second half of the bactus in specular reflection.

Openwork scarf

Openwork bactus with needles is worth it to work hard over. After all, this beautiful and stylish thing will decorate and protect you or your loved ones in the most uncomfortable time of the year. Such an original model of a scarf as an openwork will suit almost any outer clothing, and it will be an excellent addition to your wardrobe.

Our openwork scarf will be 127 cm long, 56 cm in height, the legs are 84 cm.
Knitting density: 16 stitches / 20 rows = 10 cm face surface

For openwork triangular bactus you will need:

• 4 skeins 90 m / 50 g: 40% alpaca, 40% merino, 20% silk
• Circular knitting needles - 5,5 mm

Openwork bactus with knitting needles - sketch and description:

These diagrams show only the right half of the shawl with spokes and a central loop. The diagrams are read from right to left - to the center loop. The second half is knitted in a mirror image from left to right. Repeating the pattern is indicated by a green frame. As the series 1-12 of the Bodi scheme repeats, the number of repetitions of the repeat of the pattern along the width will increase. The Bodi and Set Up schemes do not show the purl rows, they need to be knitted like this: 2 faces., Ext.- up to the last 2 loops - 2 persons.
First we knit by the scheme Set Up, then goes the Bodi scheme, and finish with the Springtime circuit.
Auxiliary thread crochet to tie a chain of 4 loops. With spokes, the main gray thread is to lift 1 persons.loop in each of the two bumps on the back of the chain.

• Rows 1-6 - front.
• 7th row: 2 faces., Turn the work, and raise 1 st in each of the 3 edge loops, remove the auxiliary thread, place 2 open loops of the set on the left knitting needle, 2 faces.(In total, 7 points will be obtained.)
• According to the Set Up scheme, knit 1-24 rows( = 51 sts).
• According to the scheme Bodi knit 1-12 rows 4 times( 167 points).
• Under the Edge scheme, knit 1-34 rows( 1 time).

Close all the hinges with the front. We remove the ends of the threads. The scarf is ready.

Knitting patterns with a jagged edge

Another version of a triangular scarf that can be tied - bactus with knitting needles with a serrated edge. Beginner needlewomen, too, will be able to make for themselves or their loved ones such a beautiful warming thing with the help of a simple and detailed knitting scheme.

The length of the future bactus with the folded edges is 145 cm, width - 28 cm.

For the jagged bactus it will be necessary: ​​

• Acrylic threads hammer( suitable and melange and solid yarn)
• Knitting needles 4

Bactus with denticles - description

First dial 4p, thenwe knit along the rows:

• No. 1: Edge( further from the edge.), from 1 st. we sew 2( that is, from 1 st. perform the facial for the front stenochku and behind the posterior stenochku), faces., chrome. .
• # 2: chrome., persons.- 2 pcs., From 1 we make 2, chrome., Air( further). .
• # 3: chrome., From one to two, until the end of the row of faces., And then 1 chrome. .
• No. 4, 6:1 chrome., Facial, of 1 perform 2, faces.p.
• No. 5, 7: we knit the same as in 3 r.
• No. 8: close 5p., face, from 1 pt. 2, faces.and air. .

We repeat the pattern from 1 to 8 r.
When there are 144 pcs on the spokes, the number of toothed parts must be 21 pcs.

How to knit toothed edge:

1. remove the loop and make 2 facial.
2. we remove the chrome., Persons, chrome. .
3. edge, faces.- 4pcs.
4. we remove edge, faces.- 3 pieces, chrome. .
5. edge and 6 facial.
6. repeat 4 rubles, but instead of 3 faces.do 5.
7. according to the same scheme as 5 r., but at the end of 7 persons.
8. as well as 6 r., But on one front more.
9. close 7 p., Persons.- 2pcs.
   Following the description, repeat all rows from 2 to 9.

Important: the penultimate toothed part with the edge must be knit not at 7 but at 6 pts.
The last gear part consists of 4 r. . It is connected with faces.
At the end of the loop it is necessary to close.

Baktus with a jagged edge is an interesting model, which for sure was in the trunk of every grandmother, and now you can continue the tradition, and tie this beautiful and ever-lasting accessory to yourself or your loved ones.

Video lesson

In order to connect the bactus it was easier for both beginners and those needlewomen who had never knitted a triangular scarf before, you can use diagrams, photos and videos and help yourself to cope faster if you study the process by example. For this video lessons are perfect.

Video "How to bind bactus with knitting needles: a schematic and description"