Beret is an elegant and feminine headdress that is designed to prevent hypothermia in the fall and spring. It gives the image of tenderness, romanticism, Parisian chic, remains relevant and fashionable for several decades in a row. How to bind knit beret? Even a novice needlewoman will cope with this task. There are a lot of techniques and patterns with plaits, braids, anterlak, stars, honeycombs. Popular both warm knitted berets, and headdresses from a cotton fine yarn which leave translucent, air.
Step-by-step instructions with diagrams and job description
When you have chosen a beret model for knitting, you should choose a yarn that is suitable for color and thickness, and spokes. A synthetic or natural thread can be used. Half-wool or wool is used for winter hats, as it keeps the heat well. A thin cotton thread is ideal for the summer version, as it passes air and does not overheat the skin.
Knitting pattern of a beret made of thick yarn with an English rubber band
How to knit a lady's lace with an elastic band? The model with this pattern looks beautiful, and in its creation there is nothing tricky and complicated. For knitting you will need 100-150 g of yarn. Instruction in stages:
- Begin to knit from the edge( height 3 cm) with a simple rubber band or a handkerchief pattern with thinner knitting needles.
- Continue knitting with the main pattern. The English rubber band should be knit with thicker knitting needles: the first row is 1 liter, 1 is old, the second is 1 liter, the straight cap is sewn, the purse is removed, the loop that remains on the right spoke is not tied.
- The head of the beret is 10-13 cm without regard to the height of the rim. After go to the elastic 1x1, tying so 4 rows. Then, the loops decrease according to the scheme described below: 1 row - 2 liters, 1 liter, 1 abbreviation;2 - we knit on the figure;3 - 2 liters, 1 out of date;4 - according to the figure;5 - we sew completely 2 items.l.from below;6 out of; ;7 - repeat 5;8 - repeat 6.
- Next, tear off the thread of this size, enough to stitch the beret. We remove the remaining loops on the thread, tighten tight. Sew the beret, grabbing 2 threads along the edge.
Master class on knitting a warm beret with large braids
One of the interesting, voluminous and beautiful patterns - braids. It is ideal for creating a lush, warm headdress. To work, you need 150 g of yarn, two-pointed knitting needles and circular knitting needles. Instructions step by step:
- Type the loops according to the size of the girth, knit 10 circular rows with an elastic band 3x3.After that, there is a transition series: 3 out of 1, 1 liter, 1 cape, 1 liter., 1 cape, 2 liters., 1 out., 2 liters., 1 cap. 1 liter., 1 cap. 1 liter. Continue this pattern to the end of the series.
- Go to a larger diameter knitting needle, knit a braid pattern 7-8 rapports.
- Next row in a circle: three purl together with a wrong one. Further we sew for 2 liters. To the front wall to the end of the row. Cut the work thread, fix it.
French volumetric beret from mohair for the winter
Volumetric berets always remain in fashion. They keep the heat well and look interesting. For knitting, you need 150 grams of mohair, needle number 7.Instructions step by step:
- First tie the upper part of the beret: dial 91 loop, bind with an elastic band 1l., 2 str. Make a cloth 23 cm, then make a decrease in the first row of 30 loops. Make a 3 cm rubber band.
- Again perform a decrease of 30 loops. Knit an elastic band until the height of the upper part reaches 28 cm. We pull open loops.
- Separately fit the bake according to the scheme: 1 p.- 1 out of a kind, 9 liters, 1 dep.;2 r.- 1 out of a kind, 9 liters, 1 dep.;3 - 1 dep., 3 liters., We remove three on an additional spoke, 3 liters, we remove the bandage of the facial, we conclude the purl;4 - 1 dep., 3 liters., We remove three for an additional, 3 liters., We sew the removed face, we finish the purl;5 - 1 dep., 9 persons., 1 dep.;6 - 1 dep., 9 persons., 1 dep.;7 - 1 novel. We shoot three again for an additional one, 3 persons., We sew the ones removed with the front ones, 3 l., 1 pc;8 - 1 dep., Again we shoot three for an additional one, 3 liters, we sew the ones taken off by the facial, 3 liters, 1 dep.
- Repeat the series until the length of the bake reaches 56 cm. Close all the loops. To assemble the beret, make a seam along the smaller edge of the bake and on the top part. Sew to the bottom edge of the top, making small assemblies.
Beautiful openwork beret from fine yarn
Knitted needles can be laced, with the presence of curly lumens, which makes the product a decorative accessory. The variant of the headdress proposed in the master class knits quickly and easily. For work you need knitting needles №3,5, 60 g fine yarn, hook, circular knitting needles №3, №3,5.Step-by-step master-class:
- For the strip, we collect 11 points for circular knitting needles of the third dimension. We knit an elastic band 1x1 52 cm.
- Close the hinges, connect the edges of the hook.
- From the edge stitches of the lath we lift the laths: one hinge from the edge, the crochet.
- We knit in a circle of 4 rows: the first - facial;2 - facial;3 - 2 loops alternately tie the face together, nakid;4 - facial.
- We send a pair of rows with a placard pattern.
- We alternate the openwork and handkerchief drawing.
- We send 11 cm, we form the bottom with a placard pattern, reducing the required number of loops in each fourth row, tying together 3 and 4 of the same front. Abbreviations do 5 times, tying 20 rows.
- We bind the two remaining facial.
- The last row is crocheted.
- We type 5 loops, we knit five-centimeter elastic band, we close.
- Fold in half a piece, we sew crocheted ends. The resulting loop is placed in the hole between the remaining beret loops, we tighten the loops.
Fashionable youth hat in the form of a beret from angora
. By this master class you will learn how to knit a deep youth hat. It looks bulky and beautiful due to the pattern of the bumps. For it you need to pick up 150 g of wool yarn from angora, knitting needles # 5, # 7.Step-by-step instruction:
- We dial on No. 7 82 loops. We begin with a pattern of a bump: 1 p.- is not known;2 - 1 in the edge, * 3 in. M.out of 1 item, 3( 1 liter, 1 out of 1, 1 liter) *, repeat the section indicated by asterisks, 1 cr.; 3 - out of the way, 4 - 1 in the chrome, * tie 3 of 1 loops 3, 3 cm.*, repeat the section marked with asterisks.
- At a height of 14 cm between the edge cut to 16 loops. Do this three times in every second row.
- Next cut to 8 loops in the purl series. Loosen the hinges with a thread.
- For smaller knitting needles, raise the hinges along the dialing set, ply a 6 cm pearl pattern: alternate 1 l., 1 out. Perform a seam on the back of the head.
Description of a pretty beret for a girl
This master class describes the process of knitting a beautiful beret for a child. It is made very simply, therefore even the beginning needlewoman will master this product. It is necessary for knitting 100 g of yarn of the chosen color, circular knitting needles №3.Step-by-step instruction:
- Dial 88 loops, make a 4-inch rubber band 1x1.
- To knit 1 r.face, the next - purl.
- Again make a 4 cm rubber band.
- Make additions to 2 persons., CAPITAL.Knit only facial, making increases on the whole row.
- Next, knit with the facial, without making additions.
- After 40 rows, we reduce: 10 liters, 2 together l. After one row without decrements.
- The next decrease: 9 liters., 2 together. The next series without abbreviations.
- Third reduction: 8 liters, 2 together l. Next without abbreviations.
- We continue decreasing until 12 loops remain. Pull off the thread, make a seam from behind.
How to knit beret from melange yarn in a simple way
Melange yarn in most cases is used for simple patterns, because the thread itself looks original. For this master class you will learn how to knit beret in an easy way. To create a dress, you need to pick up 100 g of yarn of the color you like, knitting needles # 3, # 5.Instruction in stages:
- On the crochet, type 9 loops, make an elastic band with a length of 52 cm.
- On the top five, lift the hinges, working on the long rim of the rim: one loop from the pigtail on the side, one cap.
- To knit in the purl series all facial crossed.
- 10 cm we make garter stitch.
- We perform decrements, tying together through a pair of loops.
- Repeat the cuts three times every three rows.
- 2 knit crochet together, pull together the thread remaining. We sew with a knitted suture.
Stylish autumn beret with weeds
Grass is a thread with a long pile, which is used for knitting. Products come out original, beautiful. This yarn is good for beginners in that it hides all the flaws. For a beret you need 100 grams of grass, 100 g of wool, knitting needles 4,5, 6.Instructions step by step:
- Type 60 loops of wool on spokes number 4,5.Make a 4 cm rubber band 1x1.
- Connect the weed and wool together, continue knitting with knitting needles No. 6.
- After every 5 add a loop to get the extension.
- Spray 5 cm straight.
- Each facial cut by loosening loops every 5.
- Assemble the remaining loops, pull them together. Using a knitted suture, join the edges of the beret together.
Way of knitting beret with shorter rows of melange yarn
The model presented in this master class is knitted with shortened rows of wedges. The product looks very interesting, especially with a similar scarf. It is better to use a mauve yarn of violet, brown or other color. Instructions step by step:
- Dial 65 loops, tie one row.
- Next, you need to shorten the row to 3 loops on the right.
- We do not bind 2 loops in with 4 to 32 rows in each even.
- On the left at the same time, we do not bind 4 items in the 25 row, 3 points in the 27, 29, 31, 33.
- Turn knitting, we sew all the loops of the right knitting needle.
- We make a series, tying all the loops of the shortened rows.
- It turns out a wedge, which need 12 pieces.
- Sew the vertical seam of the beret. Measure the girth around the head of the gum, put it in a circle.
- Turn the lower part of the beret, sewn with invisible stitches, inserting an elastic band.
How to knit a beret from a bunched yarn
Very interesting, the original look hats related to the towed yarn. This thread does not require the use of cunning patterns, because it is self-sufficient in itself. To work, you need 200 grams of boucle yarn, knitting needles No. 3, No. 3.5.Step-by-step instruction:
- We collect 88 loops on smaller needles, we make a 3cm rubber band 1x1.
- We continue with big knitting needles. We knit with the wrong side or stocking.
- In the first row, we add a loop from the broach every 11 p.
- The next 4 rows are knitted exactly.
- Several times we make additions in chess order.
- We knit 3 cm smoothly.
- Each facial cut into 12 loops.
- When there are 10 items left, we assemble the bundle with a thread, fix it from the wrong side.
The description of knitting patterns of berets with needles
Beret is considered not just an ordinary headdress, but also an ornament of the female image. Thanks to the abundance of all kinds of patterns, a cap, connected by hands, can become a real work of art. Expressive, gentle woolen tangles of threads emphasize the oval of the female face, as no other headgear can, while keeping the heat and shading the created image.
- Zigzag pattern is a pattern of openwork. It perfectly integrates even the contrasting colors, creating a wavy drawing of the turning lines. Zigzag gives knitted things a modern, dynamic look. It can even be mastered by a beginner.
- Hedgehog - this pattern is created by adding capers. The pattern is easy to match, but it looks interesting and original. The pattern looks beautiful in snobs, hats, children's things, which are voluminous and fluffy.
- Peacock's tail - combines wavy lines. It looks very impressive, as you will see from the photo. Particularly interesting peacock tail looks when using fantasy yarn, including melange.
- Leaves - the pattern looks very elegant, charming. Beret with such a pattern is ideal for autumn season. Leaves are created by alternating decrements and nakids. Suitable for knitting hats, tunics, blouses, light in performance.
Video tutorials on knitting hats and berets with knitting needles for beginners
Beret is a trendy female headdress that can create a stylish image with both a feminine outfit and casual jeans. The model you can choose for a different type of face. The advantage of the form lies in the fact that it is suitable for almost everyone. In the videos below, a description of the process of knitting headgear with different patterns is clearly illustrated: with wedges, corn, braids. Demonstration of knitting will allow any novice master to master the creation of the beret with their own hands. The main thing is to have patience and carefully follow the actions of needlewomen in the video.