Configuring the Rostelecom's router and WiFi connection: step-by-step instructions

In every house, the Internet becomes an indispensable attribute, through it not only visit websites, but also connect television. Rostelecom has provided such services throughout Russia for many years. The operator, as a rule, provides equipment for rent for all subscribers, conducts initial configuration of the connection.

How to connect a router Rostelecom

The equipment Rostelecom, which is issued when connected, is not the provider's own product, they simply have the company logo attached to it, and their famous companies, for example, D-link, Sagemcom, produce. Employees of the company for the first time independently connect all necessary wires to the router. If the user changes the device on his own, reinstalls the operating system on the computer, then you should know how to connect, and then how to set up the wi-fi router Rostelecom on your own.

How to configure the modem Rostelecom

The need to reset the configuration or re-enter the settings may appear for various reasons. To do this, you need to open an interface that allows you to enter the necessary data for the connection. Some subscribers do not even know how to enter the settings of the router Rostelecom. Each manufacturer creates special support for this, and the device can be configured in two ways:

• automatically via the installation disk;
• manually through the web interface.

Via WEB-interface

To consider this option is necessary, starting from the version of the router model. The configuration of the D-Link DIR-300 and Upvel parameters will be different. This method is difficult for many, requires attention. Each wireless router has its own network http address, through which you can enter the settings panel and perform all the necessary actions. Below you will find step-by-step instructions for the most popular router models.

Using the

installation disc Some manufacturers include a special installation disk that helps to automatically configure the network connection. The program will open by default after starting the disk. The user should simply go through not the most complicated step-by-step configuration procedure, enter a login, a password that will be issued by Rostelecom.

How to configure a Rostelecom router using the example of common

models The configuration of the Rostelecom router will differ slightly for different models of the device, with different firmware. One universal way to do this is not, therefore the most popular variants of modems and their setting are presented below.

Sagemcom F @ st 2804 v7 and F @ st 2804 v7 rev.1:

1. To enter the router settings, enter 192.168.1.1 in the browser. As a rule, access is provided by the login admin and the same password.
2. In the "Advanced settings" section, find the "WAN service" item, delete the factory settings.
3. In this section go to the "Second level interface", go to "ATM PVC interface".Remove the ATM DSL interface.
4. In the same subsection, look for the "ETH interface", select port eth0 with the "VLAN MUX" connection mode.
5. "Advanced settings": find "Wan Service" and press the "Add" button. Select the previously created eth0 port, click next.
6. Select the PPPoE connection type. Click "Next" and the interactive authorization window will open.
7. Enter the PPP name, password, mark the item "repeat PPP on authentication failure"
8. In the next few windows, press "Next", you do not need to change anything.

D-Link DSL-2640U:

1. The configuration of the Rostelecom router of this model is located at 192.168.1.1.Login, password is admin by default.
2. Go to the "Network" section and click on "Click'n'Connect".
3. There are two types of connection: PPPoE or via a dynamic ip-address. This instruction describes the first option.
4. Enter the username and password given by Rostelecom, click "Next".
5. When the ADSL line is connected to the router, the router will show a successful connection. To configure the Wi-Fi, click the "Next" button.
6. Find the "Mode" parameter and set the "Router".
7. In the next window, enter the SSID of the network, use Latin letters.
8. Go to the next window, the section "Network Authentication", select "Secure Network".
9. Invent and enter your password in the "Security key" field, click "Next".
10. On the next screen, confirm the save.

D-Link DVG-N5402SP:

1. To configure the router of Rostelecom of this model, enter the network address 192.168.8.254.
2. On the authorization page, do not enter anything by default, just click "Login".
3. Go to the "Setup" section, find the "Internet Setup" item.
4. Choose the type of connection - "PPPoE Dual Access".
5. In the opened form enter the login in the field "PPPoE Account", create a password and write in the fields "PPPoE Password", "Confirm Password".
6. In contrast to the "Second Access IP Type" select "Dynamic IP", check the box "VoIP Over Second Access".
7. On the same page below, find the "VLAN" section. Check the "Enable VLAN Tagging" check box.
8. For the Wan1 field, set the value to 0, click "Apply", and below click "Save &Restart ».
9. will redirect you to the "Maintenance" section, to the "Backup and Restore" page. Make sure that the item "Save all Settings" is highlighted. Then click "Reboot".Wait until the router reboots and continue working.
10. Next you need to visit the "Setup" menu and the "LAN" section.
11. Check the "Enable Wireless LAN Interface" line and click the "Apply" button.
12. Go to "Wireless Security", set the value to "WPA2" and "WPA Authentication Mode", set the value to "Both".
13. For the "Pre-Shared Key" field, think up and enter the code for your network wi-fi. Click "Apply", then click "Save &Reboot ».

Qtech RT-A1W4L1USBn:

1. The network address of this router from Rostelecom is 192.168.1.1.Use the login, the password is admin.
2. Sometimes after login, the service will immediately ask you to change the standard access to your personal ones, which you can think of yourself.
3. In the web interface menu for manual configuration of the router, go to "Interface Setup", the "Internet" subsection.
4. You need to choose the type of connection. Now the option is considered via ADSL connection, so select ATM from the "Transfer Modes" list.
5. "Virtual Circuit": select the first connection with index 0. Check that the status is "Activated", otherwise the connection will be inactive.
6. Section "VCI" and "VPI", you need to enter the data that the branch provides Rostelecom.
7. In the item "ATM QoS" set the value of "ubr", and in the ISP section it is better to choose "PPPoA / PPPoE".
8. Click on the item "PPPoE", enter in the fields "Password", "Username" the data that you provided to Rostelecom.
9. Next, you need to select such parameters as "Encapsulation" - "LLC", "PPP Authentication" - "AUTO".
10. For a permanent connection, Connection must have the Always On parameter.
11. Click "Save".

This router has a special built-in utility called "Quick Start".This feature is very helpful if you are not sure that you can configure via the web interface. The program is very simple, understandable, many users do not have any difficulties. The utility will perform basic configuration of the device on its own.

Video instructions for configuring adsl modem Rostelecom