A popular hobby among children and teenagers was the creation of a variety of jewelry and accessories with sets for creativity Rainbow Loom. How to weave a bracelet of rubber bands ladder? This is a simple scheme that you will learn in a matter of minutes. Despite the simplicity of the pattern, the finished product comes out broad, interesting, and beautiful. You can use different colors of rubber bands, combining them with each other, each time getting the original result. On video lessons with YouTube, step by step master classes from this article, you will learn how to weave bracelets from rubber bands stairs.
Step-by-step instructions and braiding schemes for the "Staircase" bracelet on the
It is easy and convenient to weave a variety of ornaments through an iridescent machine. This tool was invented by an engineer specifically for his daughters. The machine is a series of rows with pegs, fastened by three immovable platforms. By stringing small silicone multicolored irises on the bars you get a variety of patterns. There is also a miniature version of the machine, called monster teil, which is also used for weaving jewelry, toys, accessories, pendants.
For work you will need multi-colored elastic bands, clips for closing the bracelet, a special hook. In many sets, the last tool is made of plastic. But experienced masters prefer knitting metal hooks. According to their feedback, they are more convenient when weaving. You can use a variety of decor elements: beads, pendants and other accessories. They are used for additional processing of the finished product. So decorations become more beautiful, original and authoritative.
Very simple weaving bracelet style "Ladder"
For the first master class for braiding a ladder you will need a machine, a hook, multi-colored silicone irises, a buckle. For work, place the machine so that the arrows on it are looking in the direction opposite to you. Choose contrasting colors for edging, central "steps".Step-by-step master-class:
- We begin to weave from the first column of the middle row. Stretch the elastic band, toss it to the first peg of the left row without twisting the figure-eight. The next iris will catch the middle peg and the first right one. Go to the left row: pull from the first to the second column, from the second to the third, continue until you reach the penultimate. Do the same in the right row. Finish the base by connecting the left and right rows through the center column.
- Place the irises transversely, which will constitute the "steps".Left and right pegs create a transverse layer. Rotate the colors until you reach the third, beginning at the end.
- Choose the colors for the middle part of the bracelet. Hook them for the first and second, second and third pegs, continue until you reach the end, where you need to wrap the gum two or three times.
- Turn the machine counter-clockwise towards you. Start twisting the center bands with loops: hook the upper elastic band, pull forward, hook on the next peg. Continue to twist to the end.
- Pull one more layer across. Colors must match.
- In the place where you started to twist the loops, add the upper iris, twisted in half.
- Hook the elastic band on top of the crocheted top. Pull to the side left peg. Do the same with the right column. Continue twisting to the end. This technique is to grab the bottom layer, move it to the next column.
- Pull the center of the iris when you reach the last pin.
- We remove the product: we thrust the hook into the channel, pull the last irises to the left, throw it onto the hook. Gently tighten the jewelry.
- It is necessary to lengthen the bracelet: turn the machine over so that the arrows show from you. Place a few rubber bands in a row.
- Twist this chain with loops.
- Attach the fastener.
- Connect both ends of the product with a clip.
Bracelet made of rubber products "Staircase" with beads in the form of flowers
Next lesson is devoted to weaving a bracelet ladder. However, in this version, the role of the "steps" will be made with beads, the shape of which resembles a flower. Choose the colors of the rubber bands that will form the basis of the bracelet. Prepare a hook, lock for connecting the product. Place the machine so that the arrows are facing from you. Instruction in stages:
- We put irises on the central and extreme row.
- It is necessary to throw irises with beads across: push the elastic into the hole of the flower, put it on, as shown in the photo.
- We continue to string beads, skipping one row of pegs.
- Clip clips, as shown in the photo.
- We begin to twist the bracelet, crocheting the lower iris, carrying it behind the next walking pin. So we repeat on both rows.
- We remove from the machine the product, previously clipping the clips to the free end.
- Shave the second part of the bracelet according to the first three steps. We fix the first part.
- We send the second part of the product. Remove completely from the machine, connect both ends with a clip.
How to make a bracelet on a small machine monster teil
You can not only brace a ladder strap on a large machine, but also on a small one - a monster teil. It looks much simpler, and its creation does not take much time. The work is carried out on the six pins of the upper and lower rows. Instructions step by step:
- The first elastic band is clinging to three rows, twisting the figure eight.
- We catch across, as shown in the picture.
- We drop the bottom layer in the center.
- We throw white on the opposite pin.
- Draw next to the right and left, lower the bottom row. We return white. We throw one more.
- We catch three more, we throw off the bottom layer.
- We skip the remaining three rings.
- It turns out the sequence: we throw the white behind the opposite pins, throw, return the white, we catch one more. We put three elastic bands on opposite posts. We skip the bottom layer.
- We continue to wear gum until we reach the desired size and length. We connect both ends with an s-shaped clip.
Video tutorials for beginners on weaving the bracelet "Ladder" without the
machine. By the videos below you can master the braiding of the staircase bracelet. The pattern consists of two parts: horizontal lines in the middle, reminiscent of steps, and two chains on the sides that braid the product. You can choose a variety of colors for the central and side elements. In some cases, needlewomen are inserted instead of "steps" beads. So the product becomes more interesting and beautiful.
If you do not have a special machine, do not despair. The situation is able to fix ordinary cutlery and other accessories that will be found on the desktop of every teenager. The first video uses a slingshot, which is included in many sets. Further demonstrates the process of weaving the staircase bracelet with teeth, forks and pencil. Therefore, prepare everything you need to create jewelry and boldly embark on mastering this technique.