How to tie a tie: a diagram. How to tie a man's tie - step by step instruction in pictures and photos

In this article, I would like to consecrate such an exhilarating question for many women about how to choose a man's tie and how to tie it. Certain rules exist, but they can be easily assimilated.

Contents

How to tie a man's necktie: Scheme
How to tie a tie? Step-by-step instruction in pictures and photos
We tie a knot on a tie
How to tie a thin tie?
How to tie a tie on an elastic band?
How to tie a bow tie?
How to tie a child's tie?
How fast and correctly tie a tie?
Ways to tie a tie
A simple way to tie a tie
How to tie a tie - video
Video: Knot New Classic

Experts from the University of Cambridge conducted observations according to which when tying a tie, usually 9 movements are used, and even with these movements it is possible to combine 85 different variationstying a tie.

About a hundred combinations you will hardly need, but several ways to learn it is desirable - believe me, it can come in handy in life.

instagram viewer

How to tie a man's tie:

scheme The Eldridge knot, born just in 2007, is rather unusual, but it attracts attention. It is matched by 15 steps, which are easily reproduced due to the orientation to the circuit.

IMPORTANT: Keep in mind that, unlike most of the sites, Eldridge is not tied up with a wide but narrow end. However, even if you do everything right, this whimsical knot can quickly untie because of inaccurate wearing, so do not be afraid to tighten it properly.

First of all, arrange the tie with the seams inward so that the narrow end is to the right of the wide one. Wide align with the
belt buckle. Place the narrowest part on the wide one by crossing the
. The wide edge should be moved from the left to the right
. Lift the narrow edge and insert it into the gap between the accessory and the skin.
Pull the narrow edge to the left.
. Take care of the visible side of the Eldridge- for this, the side of the tie that we are working on, move to the right and pass through the collar of the accessory
. Pull the narrow edge to the left and pull it to the right under the wide edge
. You should haveand formed the front loop. Pass it a narrow end from right to left. At the same time, point up the
. Tighten the resulting knot, but not with all the strength.
Leaving the narrow part still on the left, fold it by the collar of the tie, pulling it down
Throw the end from the left side to the right by tucking it behind the collar
. As a result of the previous action on the visibleone more eyelet appeared. Pass through it on the right side to the left narrow end, lifting the
A bit tighten the node
As a result, the remaining small tip of the tie will remain sticking out. To conceal this, seamlessly tuck it in
. It just remains to place the Eldridge node in the middle.

The Eldridge knot is perfect for shirts that have a medium to long collar, and also for a collar with small buttons or soft ends.

The Trinity knot is similar to Eldridge in that it showed itself to the world only recently, but has already become quite popular. This is due to external unusualness and similarity with the Varangian symbol, which is called a trikvert. The formation process is reminiscent of the Eldridge node - all the basic actions are performed by the narrow end.

IMPORTANT: Remember that the node will be asymmetric and large.

The tie should be tucked into the inner side closer to the body. Make sure that the wide part is on the left, and the narrow one is to the right. Widely place it so that it is just below the buckle or aligned with it
Cross the ends so that the largest is located under the one that is smaller than the
. The smaller one is pulled upward, passing into the formed collar of the
tie. Pull the smaller left
.narrow on the left side to the right
Narrow part pull up, pushing it into the collar of the accessory
Pull the end to the left, lowering it
The horizontal component of the knot is formed bydragging a narrow part of the tie to the right side under the collar. The strip of fabric should lie horizontally.
A loop was formed during the previous step. Through it, and you should pass a narrow part of the tie
Again, pull the tie horizontally, the smaller part should pass under the larger
Pull the desired end into the loop that was obtained due to point 9. Slightly pull the end upwards.
The remaining loose narrow part of the tie is imperceptibly threaded over the collar -should stick out
The final touch is to fix the tie

As you can see, this scheme is very similar to the Eldridge version, however it requires lessmanipulations. The "Trinity" knot is suitable for garments with a medium or wide collar, for a collar with buttons and a "shark" option.

If a man likes long knots, we recommend Van Wake. Invented his actress Lisa Van Wake, adding to the sight of "Prince Albert" another turn.

So, arrange the necktie on the neck so that the seams are facing inwards. The largest component of the accessory is located on the right, and the smaller one is on the left.

IMPORTANT: The smallest component of the tie should be at the waist level, but corrections are possible - it all depends on the person's height. Also important is the size of the accessory.

Work this time with a wide part of the tie. Arrange it so that it intersects with another
Place the wide part under the narrow one - as a result, the first wraps the second
Move the wide component to the left above the narrow one. Do not forget that the line was horizontal
Return most the most part to the right again, passing it now under the narrow
And turn again from right to left - this is how the front component of the
is formed. Wrap the necktie again, but now slightly lower than before
Nowlet's talk about the third layer of the front of the unit. Remember that the line should lie horizontally
Lift the tie by placing the end under the collar
The outside hinges are still useful - through them you need to pass the largest component of the accessory down
Pull the accessory better and correct it

It is recommended to combine the withmedium, and also a wide collar. Option with buttons is also not bad.

Next node - "Baltus" - less convoluted than the previous ones. He appeared in the last century thanks to Baltazar, who was an artist.

Arrange the tie in such a way that the narrow edge is on the left and the wide one is on the right side.

IMPORTANT: In this technique, seams are placed from the outside, that is, the thing needs to be placed face-to-face.

Cross the ends, while the narrow will be placed over the wide
Wide point up
Place it under the collar, pulling it to the right
Pull the same part up
Fill the edge of the necktie by the collar and pull it to the left
Raise the wide part of the
Place it again under the collar of the tie andpull right
It's time to wrap the wide edge again, pulling it to the left - eventually the front part of the knot will form.
Point the wide edge to the top, thread it under the collar
Thread the edge through the hinges on the front side of the
Correct the result of the work, without forgetting to pull the largest side down to the maximum to fix the knot tightly

Recommended "Baltus" for of things,having a large collar or a collar that has soft ends.

"Murrell" is suitable for those who want to try something that does not belong to the classics. In fact, this saw the world in 1995, the site is an inverted Windsor.

IMPORTANT: Correctly tied "Murrell" is symmetrical, its shape is a smooth middle triangle.

Fit the tie so that the inner side is closer to the body. Place the wide component on the left, and the narrow one on the right. Wide should be approximately at the level of the buckle
Cross the ends of the
The smallest pass through the collar of the tie, pulling it up
Put the narrow part over the collar, pointing it to the left
Place this part under the wide, stretching to the right
It's time again to pull the part over whichwe work, top
Wrap it by the collar, pulling it from the bottom on the right side
Drag the end to the right, placing it above the knot - this is how the
is formed. Pull it upward atpart by threading it under the collar
In paragraph 8 has turned the front loop - it is through it now and need to push through the narrow part of the accessory down
Correct what happened. Please note: the narrow part should be on the wide

tie knot scheme Suitable for the medium, wide collar shirt and for the collar with soft ends.

How to tie a tie? Step-by-step instruction in pictures and photos

"Four" - a wonderful choice for any things.

Place the necktie on the neck by placing one end on the other
. The largest end is the thin end from left to right. An eyelet should form. However, keep in mind that the wide part should be under the narrow
. Turn the wide part to the left side over the narrow one. If everything is done correctly, you will get a loop
In the loop and it is worth to pass the widest end of the tie

IMPORTANT: It's better not to level the edges of the tie after it is tied with the "Four" - it's useless, but you can do worse.

" Half-Vision" is not at all more complicated than the "Four", but it looks more interesting.

Fit the accessory so that the wide end falls 30 centimeters lower than the narrow
. This is the long side and it is worth circling the short one from behind so that you can bring the first up. Do not forget that you need to lift the necktie up. Insert the end into the throat loop
Re-wrap the wide part around the narrow one, pulling it down
Pass wide through the loop formed earlier
Tie the tie

"Windsor" resembles the previous version and is suitable for those men who lovewide knots.

The wide end after the tie is thrown over the neck should be on top of the narrow one. The first one needs to be made longer than the second one about 30 centimeters by 30
Bend the narrow end from the inside by wide, pulling the last one up through the throat loop
. Now lower the wide part downwards and bypassing the narrow one, direct the end to the right.
Pull the wide part through the narrow sideleft. Push the end through the collar
Thread the end into the formed front loop

Knot a knot on a tie

When knotting, recall about the following nuances of :

Note the accessory color: so, complex combinations will look more advantageousin combination with quiet pastel tones, but for brightness, simple knots are more suitable. This can be explained by the fact that tying simple combinations on motley models allows you to avoid the refraction of patterns, shades of

. Now look at the collar of the shirt, to the face of its owner - cutwill be well combined with a wide accessory, a three-dimensional knot. Use a complex knot when the collar is wide, and also if the face is broad. But if the face is elongated and the collar is narrow, master the classic knots that are thin

Do not listen to those advisers who convince you that you can tie a tie in your hands,and then already put on your neck. In fact, the correct knot will only work on the neck of the
. Note that simple classic knots exclude the presence of wrinkles. As for the wide knots, everything depends on the preferences of the owner of the accessory - some like the light negligence of the
. Pay attention not only to the tie fabric palette, but also to its material - so the complex knot is best obtained on thin simple fabrics. Synthetic should be avoided, giving preference to natural fabrics - the knots are tied to them best

IMPORTANT: Do not forget to make sure that the widest part of the knot is perfectly flat

. Whichever knot you choose, you can hardly tie it - better tighten up tomeasure of a tight state. But also it is not necessary to tighten the knot very much - you can explain this by saying that all excessively tight knots look the same, so all ingenuity can go to dust.
. The thick lining of the tie makes it difficult to tie it - consider this fact when buying an accessory

. How to tie a thin tie?

The retro style shows itself again in the streets, and with it reminds of itself and the fashion for narrow ties, called "herring".They are stylish, original, perfectly combined even with a business image. Remember the following nuances of wearing of such a tie:

It is recommended to wear them to men of slim build
Large chains or rings are not combined with accessories of this type. Remember that a thin tie provides for minimalism. However, everyday jeans with sneakers also do not fit the
The best choice of the node in this case is the medium-sized and asymmetrical
. As for the color range, the prints are excluded. Most attractive are plain or checkered models
Pay attention to the jacket and shirt: the jacket should be narrow, and the collar of the shirt should be chosen in such a way that it is not too big. Blazer with buttons also perfectly suits

For fine ties, "Grandchester" perfectly suits - requiring skill, but perfectly looking option:

Throw the tie so that its seams are located to the neck, while the narrow part will be on the left
Put the narrow part on the wide
Twice wrap the wide end of the narrower
Now pull the end that was circling up and thread the collar
Taketurn around the loop, removing the wide end on the right under the
loop. Point the end to which all manipulations are made to the left. The fabric should lie horizontally
Pull the end up, looping between necktie and neck
Thread the end into the loop, guiding it down, and straighten

How to tie a tie on an elastic band?

A tie on an elastic band is a favorite accessory for schoolchildren and young office workers who can not or do not want to bother with daily knotting. It turns out that a tie on an elastic band does not need to be tied at all, instead, they should be folded in a certain way and sewed up by the .

IMPORTANT: Always remember that the fabric should then wrap around the rubber band.

To fold the thing in the right way, place it on any surface with a smart side down, and place the rubber band across the top
Turn the tie over the elastic with the thin end
Turn the end back to the left side
Insert it under the rubber band, pointing downwards
Gently pull all the ends - this will form the
node. Connect the lower components of the assembly together. As a result, an inverted triangle is formed. Sew that which happened. If you do all the manipulations correctly, on the front side of the accessory there will be a small knot

How to tie a bow tie?

Previously, this tie was worn exclusively with tuxedos, but now it can even be worn not only at business events, but also at festive ones. Suitable for butterfly collar, but also for short and medium collar.

First of all, wrap the fabric around your neck. The left end should be longer than the right one by 4 or 5 centimeters.
Cross the left with the right, forming the loop
Meanwhile, the right end fold in the form of an accordion - it will turn into the face of the butterfly
Lower the left side down so that it is perpendicularaccordion
Double fold the left end according to the example from the diagram
Thread this end into the loop that formed earlier
Hold the ends, pull them in different directions - this will tighten the
Bring the butterfly in the front view, adjusting it

How to tie a child's tie?

For children, adults usually purchase the accessory on the .It is good for several reasons: firstly, there will be no need to be tormented every time, and secondly, there will be no need to buy a new thing because of the rapid growth of the child. The usual tie will be small in just a couple of months, so the elastic band will come in handy.

How fast and correctly tie a tie?

Actual simple and fast node in the event that you need to quickly tie an accessory, but the time for such procedures is completely lacking. The "small knot" is good because it looks great and is easily tied to any type of fabric.

First, position the accessory around the neck so that the largest part is on the left side and is lowered below the smaller

IMPORTANT: This method of forming the knot is considered one of the few at which the seam is outside.

Cross the part of the tie, while the smaller should be placed above the larger
Now place the wide part above the narrow one, pointing it to the left
Place the wide side in the loop. Movements should be directed from the bottom up. Make these manipulations on the wrong side of the
And now thread it in the loop from top to bottom, but already on the front side of the
Pull the tie down, correct it

Ways to tie a tie

"Diagonal knot", which is considered one of thethe most complex and unusual, it is as follows:

Cross your most part with the lowest after a tie thrown over his neck
most are now located under the lower, bringing it right Repeat the
action, again making turns around one end of the other, making the output right now
large component in
tuck loop shown on the left side of the largest part
Fill most previously made in the eyelet. Node is ready

The "American knot" is created according to the following scheme:

Place the accessory around your neck. Cross the parts so that the wide one is above the narrow one. Direct the wide right
Now it's the biggest component to point downwards, through the
loop. Tighten the
slightly. Pull the big end horizontally to the right.
Thread it in the

A simple way to tie a tie

"Kent" is considered one of the easiestmethods of tying a tie. It is recommended to wear tall men using ties of medium length.

So, to start with the biggest part outward, put on an accessory. The largest side at the same time, let it be on the right, the small side on the left. Work for the most part, and lower it for a little longer than the navel.
. Wide cross with a narrow one so that the first passes under the second. As a result, a wide component will be displayed on the left. Turn it to the right - now it will lie on a narrow
Now the part with which active work, lift and insert in the loop formed between the thing and the throat
final stage - threading in the end most of the loop down from the front. A little pull down and straighten his tie

«Prince Albert» perfectly combines with jackets having an average, a collar or a collar with buttons.

IMPORTANT: This node is considered one of those few that need to be tightened more tightly - its view from this becomes more strict.

Fit the tie so that the seams are closer to the neck. The wide end will be to the right, a narrow well - left
wide end put on the narrow side, so that a crosshair
underneath a narrow part of the slide wide right
now swipe left across the top of the narrow part - the so-formed front side node
Repeat the previous step
Pull the wide end to the neck, passing between the necktie and throat
Now pull the necktie through the front loop down and straighten the resulting knot

Pratt is quite a universal node, which anyone can easily handle. It perfectly suits both for wearing every day, and for holidays.

Fit the tie so that the seams are facing outward. The wide side will be on the right and the narrow side on the left.
. Cross the wide part with the narrow one. The narrow one will be over the wide one.
. Wide pull upwards, under the collar of the necktie.
. Make one turn and pull the end to the left.
. Now it's time to move the end to the right horizontally -the outside of the
assembly. Pull the end upwards again, passing it through the collar
. Now it's worth to go from the top down through the front loop
Pull the end down and straighten the

How to tie a tie - video

Knot "Manhattan" - stylish and light. Universal for any costumes and shirts.

"Oriental" node - for those who want something unusual. The result is a stylish and attention-grabbing.

The "Christensen" node - it is also called "cross".Ideal for those things that are made of loose materials. The width should not be large.

The "Onassis" knot is a godsend for those men who prefer to hide a knot under the collar of a shirt. Suitable accessories are lightweight material.

The "New Classic" node - is a small triangle. Ideal for ties of medium gravity and not very long.

As you can see, the options for designing a tie can not be counted. However, you can master several of them in order to facilitate the collection of men for work or a holiday. Believe me, he will appreciate this skill.

Besides, it is quite possible to please such knots and please yourself, because a tie is more and more often seen on female necks - it looks such an accessory is very stylish and appropriate quite often.