Methods of cleaning the bathroom from rust, lime and yellowing.
Contents
- How do I clean the bath of rust?
- How to whiten the bath from yellowness?
- How to whiten the enamel bath?
- How do I clean an acrylic bathtub at home?
- How to whiten a cast iron bath?
- How and what to clean the bath with folk remedies?
- How do I clean the acrylic bath with vinegar?
- How do I clean a bath at home with soda?
- How do I clean the bath with citric acid?
- How do I clean the bath with hydrogen peroxide?
- VIDEO: Cleaning the bathroom
Clean bathroom - a measure of cleanliness of the mistress of the house. This is one of the most frequented places where many molds, dust and soap deposits accumulate. In places where the bathroom comes into contact with a mixer or sink, rust and scale are often formed.
How do I clean the bath of rust?
Rust is often etched into the surface of a metal bath and is difficult to remove. Many housewives solve this issue by purchasing expensive cleaning supplies. But, unfortunately, they also do not always cope with the problem perfectly.
Instructions for cleaning the bathroom:
- Take the can of glass and rinse it. Remove moisture and pour 100 ml of ammonia
- Add 50 ml of hydrogen peroxide to the substance and mix
- soak the fabric and rub the dirt
- You can pour some of the solution onto the rust and leave for 20 minutes
- Rinse with warm water, if necessary repeat
Rust - iron oxide, which is removed with the use of acids and alkalis. It is perfectly soluble with ammonia, vinegar and special aggressive agents.
How to whiten the bath of yellowness?
This way many housewives regularly use to clean the sinks and the bathroom. The effect of the method is based on the use of wine vinegar and salt.
Yellowness Instruction:
- Mix 100 ml of wine vinegar and 50 g of
- salt in a glass bowl. Put the vessel in a microwave and heat the solution to 70 ° C.
- Dampen the cloth and rub the dirty areas. Leave for 30 minutes
- Do not over-apply the solution, as it can damage the enamel
How to whiten the enamel bath?
Such products are best cleaned with acid-containing solutions. In order for the product to work perfectly, it is necessary to warm the bathroom. Just collect hot water into it, lower it and wipe it dry.
Only after this, apply a cleanser. Enamel should not be rubbed with abrasives and a metal scraper. From this, it can become covered with cracks. In these cracks, mud and mold are often blocked.
Instruction for bleaching enamel:
- Heat the product. This intensifies the chemical reaction and the cleaning takes place faster
- Pour concentrated vinegar or essence on the dirty areas
- Oxalic acid copes well with the dirt, but do not put it on for long.
- Hold the product for 15 minutes and rinse thoroughly with warm water.
Than clean the acrylic bath at home?
It is not necessary to use abrasive compounds and powders to clean acrylic bathtubs. They scratch polymers and spoil the product. It is recommended to use such compositions as "Silit", "Domestos", "Cif".Substances with a high content of chlorine( whiteness) should not be left for a long time, as they are absorbed into the pores of the polymer and cause it to turn yellow.
Instructions for cleaning acrylic bath with citric acid:
- Dissolve the spoon of the substance in a glass of hot water
- Soak the solution with a cloth and apply to the soiling. You can wipe the entire surface of the tub
- Rinse with warm water
- You can use special plastic baths, it's Riton, Eago, Ravak, Delfin
How to whiten a cast iron bath?
Cast iron bath can be cleaned with soda and abrasives. It is recommended to clean with liquid chlorine. Do not rub the metal surface with a scraper, it destroys the coating.
Instructions for cleaning cast iron baths:
- Rinse the product with very hot water or boiling water
- Wipe with a dry cloth or towel
- Pour a bit of whiteness or liquid chlorine. You can buy Domestos with chlorine or Hedgehog Hepatitis
- Leave it for 15 minutes, and then rinse with warm water
How and what to clean the bath with folk remedies?
There are many ways to clean the bathroom of rust and limescale. Of course, it is advisable not to use methods that destroy enamel.
Options for cleaning the bathroom folk remedies:
- Salt mixed with vinegar and warmed. Apply the solution to the surface. Rinse off water with
- Drizzle with ammonia and apply to rust or dirt. All wash off after 15 minutes
- Pour the citric acid onto the wetted surface and leave for 20 minutes. Wash the surface of the
How to clean the acrylic bath with vinegar?
Acrylic - a kind of material that requires careful care. On its surface is an antibacterial film, which protects the container from the appearance of mold and bacteria. It is not necessary to clean the whiteness and aggressive substances. Use proven and safe methods.
Instructions for cleaning acrylic vinegar:
- Rinse the product with hot water, dry it
- Dissolve 20 g of salt in 100 ml of vinegar and place in a microwave. The temperature will accelerate the process and you will quickly get rid of the dirt.
- Pour the bathroom solution and leave for 20 minutes.
- Wipe with a damp cloth and wash with water.
. How to clean the bath at home with soda?
Heat the bathroom with warm water and wipe it dry. Mix baking soda with calcined and apply to a damp bath. Do not rinse off the soda and allow to dry the paste. Pour into a glass of vinegar and pour the surface to them. Vinegar and soda will enter into a chemical reaction and the mud will disappear.
You can use this method:
- Mix soda with water until you get a pulp
- Apply the paste on the surface and leave for 20 minutes
- Rub the surface with a sponge and rinse thoroughly
How do I clean the bath with citric acid?
This method is used for cleaning cast iron and acrylic bath from lime scale and rust.
Cleaning Instructions:
- Dampen soiled areas with warm water.
- . Sprinkle citric acid. It will adhere to the wet surface, forming a concentrated solution of
- Leave for 25 minutes
- Wipe with a clean cloth and rinse
How do I clean the bath with hydrogen peroxide?
Hydrogen peroxide is commonly used to clean the bathroom from yellowness. It is a weak acid that corrodes dirt. This solution does not smell anything and is completely safe for health, unlike chemicals.
Cleaning instructions:
- Mix the ammonia and peroxide in a ratio of 2 to 1
- Prepared solution apply on a warm and dry surface
- Leave for 30 minutes
- If the bathroom is very dirty, leave a cloth dampened with prepared
As you can see, it is quite easy to clean the bathroom of rust and yellowness. It takes a little time and effort.
VIDEO: Cleaning the bathroom
Save
Save
Save
Save
Save