Fungal microorganisms not only disfigure the appearance of the room, apartment, apartment building and damage its building structure. Remedy for mold and fungus on the walls is necessary to protect against bronchitis, pneumonia, asthma, eczema, candidiasis, allergic and other dangerous diseases - the consequences of infection with this pathogenic flora.
What are the means of fungus and mold on the walls in the apartment
Boiling in a warm microclimate with high humidity, fungi form whitish, bluish, greenish, black or brown plaque. Mold in the apartment appears and for such a common reason, as a violation of construction technology. For example, with incomplete sealant sealing joints between panels, the use of wet building materials, no waterproofing, installation of plastic windows of poor quality.
Removal of mold is often a serious, protracted struggle. However, sometimes it appears again. To eliminate this pathogenic flora forever, effective antifungal agents are needed. Destruction of mold will be effective if first establish the root cause of its appearance. When it remains unclear, repeated appearance of the fungus can not be avoided. Then you need to make the right choice: what is more appropriate - a folk remedy or a factory preparation of household chemicals.
Antifungal
One of the universal preparations for the removal and prevention of the development of mold microorganisms is the inexpensive domestic concentrate Antifungum. It can handle any surface, except for metal and propylene."Antifungus" is added to the composition of mortars, plasters, water paints. It is widely used for the disinfection of various rooms. Improved quality is distinguished by the antifungal "Monomakh".
A new generation of Atlas Mykos, manufactured in Poland, is very effective. It is popular due to the universality of its action, as it destroys not only varieties of fungi, but also mosses, lichens, algae. This is also a concentrate, which before use is diluted with water. For the treatment of concrete, mortars, other building materials, another Polish antifungal drug is used - Izohan Grzybostop.
Effectively destroys the fungus in rooms with high dampness preparation "Spectrum Fungicide".And not only on concrete, stone walls, plaster, but also on wooden surfaces. If mold has divorced on walls, recently painted or varnished, and it is not advisable to lose such a coating, the preparation "Titan Fungicide" is ideally suited. The domestic funds "Sepotosan-T", "Deo-anti-mold" proved to be excellent.
Folk remedies
If the protozoa did not have time to fill the space, you can treat the wall or ceiling with such known detergents as Domestos or Whiteness. They are plentifully applied to the affected surface. This is important because fungal spores are easily transported through the air. You can wipe the mildewed tile, especially the seams between the tiles, diluted in half with water by a pharmacy solution of hydrogen peroxide, table vinegar, boric acid solution or water flavored with tea tree oil.
A heated mixture is used: 100 ml of hydrogen peroxide and table vinegar plus 50 ml of boric alcohol. Often the walls are moistened twice with a solution of copper sulfate( 20 grams of powder per liter of water).Before this remove all affected coatings: wallpaper, paint, plaster. Mold on the refrigerator, food storage containers are removed by rubbing with baking soda solution( a teaspoon of powder into a glass of water), and then with weak table vinegar. However, the use of folk remedies makes sense only at the very first appearance of the pathogenic flora.
How to get rid of mold and fungus
First of all, you need to eliminate the causes of reproduction of fungi: replace leaking faucets, pipes, eliminate cracks in the walls, clean the ventilation wells, where the spores are taken. Then on the surface apply antifungal primer, for example, "Universal", "Euro Primer" or Tiefgrund. Handle chemicals with care. To conduct work should be in a face mask, gloves. It is important that the room is well ventilated.
With the improvement of concrete, brick walls, they are first cleaned from wallpaper, paint, plaster, dried with a powerful hair dryer or blowtorch. Then apply the antifungal agent with a roller, brush or spray, if it is spray, shpaklyuyut or plaster the wall. The room should be well ventilated for 2-3 days, so that all unpleasant, toxic smells disappear.
In the bathroom
To get rid of mold in the bathroom, you can remove the worn sealant and disinfect the surfaces with a fungicidal agent. The bathrooms are perfectly protected from fungi by the Hungarian drugs SZAVO, Well Done, the Israeli spray "Anti-Mold Bagi".Then apply a new antifungal sealant, for example, "Demosil-Micro" or "Biotol-Spray."A wonderful tool for bathrooms, saunas, swimming pools - the German preparation Mellerud, eliminating all types of mold, it is applied by spraying.
On walls and wall-paper
To struggle with a mold on walls in an apartment follows, preliminary having moistened them with warm water, then having cleared up to a brick or concrete. After drying, the antifungal treatment of the walls is carried out, for example with a solution of "Alpa Fongifluid".Among other effective means of mold and fungus on the walls - compositions "Titan Fungicid", "Olympus Stop-mold".If small areas are hit, you can use folk remedies. Treatment of walls against mold and fungus should be carried out in stages. Only after the absolute drying they are painted or pasted with new wallpaper.
On wood
On wooden surfaces, the affected areas are cut out or burned, and then covered with an antifungal agent. The simplest, but effective means of disposal of wood from mold is pharmacy hydrogen peroxide or its mixture with table vinegar. The proprietary product is "Neomid", which reliably protects against the simplest wooden structures. Popular means are "Prosept-50", "Bioshit-2".
How to get rid of the smell of mold
Treated with antiseptic places can be sprinkled with baking soda, and after a few hours, vacuumed. Well absorbs the smell of mold hydrogen peroxide solution. Just remember that he has a whitening effect. Effectively destroy the smell of mold helps ammonia, diluted in half with water. It is used for the treatment of any surfaces other than porous structures. The agent is rinsed with water after 2-3 hours, and the mold completely disappears. Finally, it effectively eliminates the unpleasant odors of an air ionizer.