How to fix plastic panels to the wall - step by step instructions of the technology of the skin and the necessary materials

If you started to make repairs in the bathroom or on the loggia, but do not know how to install plastic panels on the wall, you need to thoroughly understand this issue. Learn the subtleties and nuances of this process, so that the repair of the house was only a joy and did not bring unnecessary trouble. The cost of such an interior is many times lower, and design options are countless.

Plastic panels are an excellent way to solve several problems at once: parts can be easily fastened to the wall, they do not require much care. However, to realize the task it is important to know how to fix the plastic panels to the wall correctly. Here are the important points concerning the installation of this plating:

• Fastening of PVC panels to the wall can be done with nails, self-tapping screws or using a special glue "Liquid nails".
• If the walls are level, then you can mount the fasteners directly to them: in the case of a wooden or soft surface, self-tapping screws are suitable, and for concrete, dowel-nails should be taken.
instagram viewer
• If the walls are difficult to level, a special wooden or metal frame-frame is first installed.

Each fixing method has its own nuances:

• If nails are used, it will not be possible to remove the plates to use them in another place: during the dismantling, the parts simply break into several parts.
• Klyumery or staples, driven by a special stapler, are best suited.

How to secure the PVC panels to the

wall To understand how to fix the plastic panels to the wall, remember some helpful tips:

• Cut the elements themselves by placing them face up.
• For eye protection, always wear eye protection when cutting parts.
• Driving nails, it is important to get clearly on the nail cap, otherwise there will be dents. To correct such a defect will not be possible.
• Do not remove the protective film before the end of the installation process to avoid leaving dirty marks on the skin.
• After installation, wash the walls with a soap solution only so as not to damage the structure or pattern.

How to fasten the PVC panels to the wall on the wooden crate

The question of how to fix the plastic panels on the wall will help solve the crate of wood. Reiki need to be screwed with a distance of about fifty centimeters. Wooden beams should be perpendicular to the direction of PVC: if the details of the future interior are vertical, then the wooden structure is best nailed horizontally.

1. First of all, install the hardware. First fix the outer and inner corners on the surface, then the finishing element - the ceiling skirting, and at the end - molding with lamellas.
2. Next, install the first part connecting the fastening elements. Fix nails or staples from the side of the wide mounting shelf.
3. To prevent the whole structure from forming a curve, check the first one before attaching the next part. She should stand evenly.
4. A narrow shelf of the second element mount to the first, leaving no gaps.
5. So sequentially attach all the PVC panels. Only the very last element differs: it must be inserted with effort to fix the whole structure. If the size does not match the remaining space, trim the part with a knife along the skin.

Fastening the plastic panels to the wall with the metal frame

If the room is always high humidity, for example, in a sauna or bathroom, then the tree quickly swells, you have to do anew repair. How to attach plastic panels to the wall in this case? Metal mounting structures are suitable. To simplify the installation process, special clamps are used. Thanks to them you can easily remove the elements of the interior and attach others.

When installing the skin, remember that the material can expand as the temperature changes. When using a wide bar, sound insulation or a heater can be attached to the free space. So simple plastic panels will help to solve several problems: create an interior with a taste and keep the heat inside the room.

Installation of PVC panels without battens for liquid nails

For smooth walls, use a construction adhesive, but during such repairs, wear a respirator and ventilate the room. The advantages will block all temporary inconveniences."Liquid nails" do not affect the plastic, quickly dry out, which gives the right to adjust the details on the wall. Such adhesive is ecological and does not depend on changes in climatic conditions( temperature and humidity changes).

1. Before gluing the panels, it is necessary to prepare the walls: remove old wallpaper, tile and plaster, align all the inaccuracies and primer the surface.
2. At the very beginning, remove the plates from the package for thirty minutes to adapt to the humidity in the air.
3. Prepare the glue yourself: cut off the tip, put on the cap, open it and install the tool in the construction gun.
4. On the wall, draw a dots, grid or pattern in zigzag.
5. At the moment of gluing, press the part against the wall so that the glue gets better with the whole element evenly. You can use a rubber roller. The first couple of minutes it is easy to adjust the position of the structure, and after 20 minutes the glue will seize.
6. The final step is to "sew" sealant joints between parts of PVC and other elements of the bathroom. The wall profile is ready.

Video: installation of plastic panels on the walls with their own hands

With the mounting of fasteners and plating in the bathroom, even a beginner can repair the wall surface. However, in order to avoid technology violations and damage to the cladding, see the step-by-step instructions in the video below, where the expert will share his secrets in installing sheets and fasteners into the slab and the ceiling. The manual will help you flawlessly perform the installation of panels the first time.

Installing plastic panels on the wall in the bathroom

How to fix the wall panels on the loggia

How does the wall decoration with plastic panels - photo