If you try to enter data on the USB flash drive, the computer may output an error message "Drive is write-protected".Therefore, how to remove the protection from recording from a USB flash drive is important for any person. The user is unable to verify the cause of the phenomenon, but often this is a precaution against downloading viruses from laptops, computers, or other devices to the drive. Clearing a flash drive from them is difficult, it is much easier to protect it, and then to remove the recording.
How to unlock the USB flash drive
Unlock is performed by the lock switch in a number of flash or removable SD cards. If you find a switch, then how to remove the write protection from the usb flash drive will switch the lock lever to the desired direction of the open lock image. After that, reinsert the media into the PC port, access to it becomes free, and you can record information. To return to the "USB flash drive" status, switch the lever to the "Protect" position. The same goes for how the item is executed, how to remove the protection from the memory card.
Run registry editor windows
The system registry editor is a way to return a flash card to working state with simple steps. Follow the simple steps:
- To start, click on the "Start" icon and type in the search box "Regedit", right-click on the dropped file, from the found menu, click on the "Start administrator" button.
- Select the subsection "StorageDevicePolicies" via the command channel "HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ StorageDevicePolicies".The absence of this section in your PC requires it to be inserted. To do this, right-click on the "Control" subsection, click "Create", select "Partition".Next, you can give the subsection the name "StorageDevicePolicies", after removing the quotes. While on this registry branch, create the "DWORD( 32 bit)" element named "WriteProtect".
- Make sure that the renamed WriteProtect element is 0. To verify this, click on the item, select "Modify", correct the unit by zero, having checked the selection with OK.A change may not be required if the value is already zero.
- Close the program, get the media, restart the PC.The reset will return the inserted card to its original working state.
Command line recovery
Command line is an alternative method of solving the issue of how to remove protection from a USB flash drive. The process includes items:
- Press "Start", enter "cmd" in the search box, right-click on the dropped program, find "Start administrator" and click on the parameter.
- Enter the command "diskpart", click "enter", then enter "list disk", then click "enter" again.
- Determine the number of the disk. If he is the only one, it will be "Disk 1".If you have more than one device, determining the number will help you know the capacity or memory of the USB drive.
- After selecting the protected disk that you want to fix, by entering "select", you need to clear the read-only attributes by typing "attributes disk clear readonly".If you want, you can perform additional formatting. To do this, use the command "clean", create a subsection "create partition primary", format the USB flash drive to the desired format. Done - the drive is again working.
How to unprotect transcend flash drives
Holders of "Transcend" flash cards can resort to using a utility created exclusively for the brand. The file is called "JetFlashRecovery" and download it is feasible on the company's formal website. The utility is completely free in access, eliminates the problems of write protection and other emerging issues. To facilitate the tracing of the utility, use the file name.
In addition to this utility, the "Transcend" brand approaches the described command-line methods or the registry editor. The means of removing the lock by switching the lock lever will be an alternative method of removing the write protection from such a flash drive. You can try all methods, because at least one of them should come up and help to eliminate this painful problem.