How to tie a scarf with knitting needles is quick and easy: a diagram and a description. How to knit a handkerchief with knitting needles for beginners? How to knit down, laced, Scandinavian, bactus shawl, with a knitted needles: a scheme, description, photo

Ideas and schemes for knitting a scarf with knitting needles.

Knitted scarves were popular with our grandmothers. They made them themselves, and then deposited in wooden chests and handed over products to daughters, granddaughters. .. Such gifts were considered the most valuable, therefore, the women who owned them, kept the handkerchiefs for a long period of time.

Make a beautiful and original handkerchief - work is not easy, especially for beginners. But this process can be easily learned, if you use the correct instruction and the scheme, which we propose in this article.

How to knit a handkerchief with knitting needles for beginners, where to start?

Before starting the whole process, decide on the pattern of the product. Because it depends on it itself knitting. There are a large number of methods for making knitted shawls. We suggest that you consider the simplest.

This product has a continuous center. Patterns are located only at the edges. This method of knitting is considered the easiest, especially for those who do it for the first time.

• Begin to knit a handkerchief from the center. Type the desired number of loops, plus 2 additional loops, that is, the edge loops. Type the loops in one thread with 2 spokes. Take the number of loops, considering the size of the product. For example, if you want to tie a handkerchief 120 mm to 120 mm, then type 200 loops, you can slightly more. It all depends on the thickness of the yarn.
• In the following rows, remove the edge loops at the beginning of the rows, do not tie them. Insert the spoke on the right side, point to the left. Keep the working loop on the index finger. Bind the loop with the wrong side.
• To obtain a square shape, increase the number of rows. Their number must be greater than the number of loops in a row.

Handkerchief

• Then knot the hem. Use it with the front hinges as the central part of the product. Dial 5 loops, add 2 edges. Then, tie a series with the wrong hinges. In the following rows, remove the edge loops, do not tie them. Insert the spoke on the right side, pointing to the left. Hold the working thread on your index finger.
• Binding the rim and the center of the kerchief, connect them. To do this, use an additional thread. On the spoke, located on the left, on one side of the central part, type the edge tabs. On the spoke, located on the right, also type the edge loops using the rim.
• Toss the knuckle of the knitting needle on the right with the left knitting needle. Make eyelets together. On the spoke on the left side, toss 2 loops, tie 3 loops together. Continue to knit until the end of the rim. The other rim is tied parallel to the rim, which you have already tied.2 The next fringes, type together with the corners on their spokes, and bind the whole.

How to knit an Orenburg shawl: scheme, description, photo

Orenburg shawl comes in three varieties:

• Simple model. Made from thick, gray or white downy yarn. This handkerchief was worn by women every day.
• Web. It is made of fine down or silk yarn. The pattern of the scarf is quite complicated. But the product eventually turns tender and subtle, it passes even through the ringlet.
• Handkerchief stole. A large downy shawl. He was only worn on holidays.

Knitting Pattern for Orenburg Shawl

Experienced knitters tie such a handkerchief is not difficult. If you can type eyelets, tie face loops and purl, purl, then you can easily make a beautiful scarf.

• To begin with, buy 250 g of thin, downy threads. As a rule, they are sold already strained on cotton yarn.
• Carefully study the description of the work according to the scheme. The Orenburg shawl is made with a border, which is located on all 4 sides. Be extremely careful, try to strictly follow the order of work.
• First, tie the rim of the bottom corner to the left. The corner of the product has a right and a left part. Simultaneously apply 2 sides, as shown in the figure. Between the parties, tie the dividing "path", using 2 face loops.

Knitting a shawl

• When completely knotted, put a piece of the rim, a left hinge at the top and a loop of the "footpath".Knit the rim until the moment you have the required length. Spray the bottom corner, located on the right side, put the right side of the rim, located at the top and the loop of the "path", on the pin.
• Loops from one pin to translate into spokes. Inside the fringe, dial the desired number of loops to tie the main cloth. Knit it together with the border of the product on the sides until you get the right size.
• Take the upper corner of the obtained border, remove the hinges from it. Do the same with the fabric of the product. Put them on the pin. Produce the next corner of the product as a second angle. Alternate the napkin, while tying together the necessary loops.

How to knit an openwork shawl: a scheme, description, photo

Openwork scarves are winter, summer and so on. It all depends on what you want to use yarn. For the winter version, the threads made from goat's down are suitable. But they are considered rare enough, because they are expensive.

If you are just starting to knit, then you should choose a cotton thread. With the help of them, you can easily connect the pattern of the scarf and get a beautiful product.

The openwork shawl that we want to offer you has a length of 90 cm and a top width of 180 cm. For the manufacture of the product, you need to buy blue threads( mohair, acrylic), spokes number 5, hook number 3.5.

Openwork handkerchief knit according to the scheme. This diagram shows only the rows tied with the front loops. Wring it according to the received scarf pattern. The density of the scarf is as follows: the report is 11 cm.

Openwork shawl with knitting needles

Finished product

• Start knitting from the bottom corner, continue to the top. Type 3 loops, tie the first strip with the wrong loops. Perform a pattern starting with 2 lines of the pattern.
• As soon as you tie 14 rows, on both sides, fasten 7 face-pieces. Convert from 1 to 82 series according to the scheme. Then continue to knit with the additions.
• Add on the right side along the edge 21 of the link. Repeat the ornamental report 3 times, add 22 loops to the left.
• Cross the openwork braids in every 6th row. After tie the braid 90 cm, close the hinges. A ready handkerchief is tied with one strip, using posts without crochets.

Square spider web: diagram, description, photo

Craftsmen who can knit shawls create unique products. A thin scarf-cobweb is a wonderful accessory, an excellent gift, and sometimes a remedy that helps cure many joint diseases.

For the manufacture of such a scarf, take the main assistants:

• Yarn
• Spokes

The cobwebs are quite tight. Even professional knitters can spend on a scarf about 2 weeks. For knitting you will have to stock up goat goose down and knitting needles No.2.5 with restraints so that the loops do not slip during operation.

Scheme

To make an openwork handkerchief airborne, select thin threads. Almost all scarves are made with the help of garter stitch. If you do not want to know the density of the mating, first tie the sample. Perform the product loosely using thick knitting needles.

Finished product

• Choose a suitable pattern for the product, for example, "peas" or "worms".
• Start knitting the edge: type 21 loops. First row: bind 5 facial loops, 2 purl loops, 13 facial loops. Run the broach, increase the row by adding 1 loop.
• Knit as shown in the pattern diagram. Use the broach in the second rows. You will have a sloping edge. According to the scheme, bind a cobweb so that it forms a part of the product.
• Next, tie in the other direction, only in the mirror. In even numbers, loops diminish. You do not need to add.

The bonded product after completely tie, wash, preferably with shampoo, do not unscrew.

How to tie a scarf with Scandinavian knives: Schematic, description, photo

The handkerchief has these dimensions: 130 cm * 65 cm. For its manufacture, take:

• Yarn - 200 g
• Circular knitting pins at number 5.5

Scandinavian shawl

Process:

• Type 7n( loops).
• 1 r - cr, 2 lp, n, l, n, 2 lp, cr.
• 2 Р - кр, 2 л.п, 3 и.п, 2 л.п, кр.

A handkerchief with an ethnic pattern

Then in odd p add n for the first 2 points to the central n and after it, and also before the last n. In those rows that are considered even, 2 n first plus 2 n last before kr bindl.p. So you knit 30 rubles.

• 31 p - pearl pattern: cr, 2 lp, n, alternate l.p with. p until the end of the river. Finish it with 2 lp and i.p. cr.
• 32 p plus the following 9 p - pearl pattern.
• 41 r - cr, 2 hp, n, hp, * n, 2 n, made with a slope to the left side *( repeat from one * to the other * to the center), n, the central part of the kerchief,* 2 n tie together with the slope to the right, n *.Repeat from one * to the other * until the p. At the end of LP, n, 2 lp, cr. Paddle the wrong side of the
• 42 pn.
• 43 р по 46 р - a pearl ornament.
• 47 р по 66 р - handmade ornament.
• 67 р on 78 р - a pearl ornament.
• 79 r - cr, 2 lp, n, lp, * n, 2 n, tied with a slope to the left side *( repeat from one * to the other * to the center), n, the center of the kerchief, n,* 2 n together with the slope to the right, repeat * from one * to the other * to the end of p), lp, n, 2 lp, cr.
• 80 р - purl n.
• 81 р on 86 р - a pearl ornament.
• 87 р по 106 р - handmade ornament.
• 107 r by 124 r - hosiery ornament.

Close knit. Hide the tips of the thread.

How to knit with a bactus handkerchief: a diagram, a description, a photo

Bactus is a scarf with a triangular shape. Often, such a product is made using spokes, after which it is tied with a crochet. Many models do not have strapping at all. We suggest you to make a simple and very stylish handkerchief, the manufacture of which is capable even of beginners.

For work, take:

• Wool or acrylic threads - 300 g
• Knitting needles at number 4( any)
• Hook at number 4.5( they are optional)

The size of the product is 180 cm by 50 cm. The main pattern is handkerchief.

Baktus

Knitting process:

• Dial 6 p, wire 3 lp, 1 pb, 3 hp. Then knit, as shown in the diagram. Start with 1 p.
• Corrugate from 1 p to 6 p, as indicated in the diagram. Continue to perform the work in a similar way to the scheme: from two sides in the facial p, increase the number n exactly at 6, that is, make n and increments.
• You can fasten the product to the required length, and then close the item

Brushes:

Cut approximately 80 pieces.length of thread, length 30 cm. Make 3 brushes. Sew to the corners of the canvas.

How to tie a handkerchief with a knitting needles: a diagram, a description, a photo

An interesting appearance of this scarf is that, first of all, its fringe is hooked with a hook. And after that the work is done with a handkerchief ornament.

Product size: 179 cm to 51.5 cm.

Appliances needed:

• Threads - 30 g.
• Hook at number 5.
• Circular knitting needles at number 5.5

Edge:

• Corrugate as shown in the diagram using a hook. At this turn p lifts: 2 v.p or 3 v.p.
• From 1 p to 8 p, tie 11 times. From 4 r to 7 r, tie an arch.
• To obtain the angle, bind once with 1 р to 5 р.Then knit once 9 and 10 p. Start with 3 r, continue to knit a beautiful border to get a right angle.
• At this time, from 3 r to 8 r. Spray 10 times with 1 p to 8 p as in the diagram. Finish according to the scheme from 1 p to 7 p.

Scheme

Shortened rows:

• Start knitting on 7 marked n located in the middle. Spray n, then rotate the binding, remove the first n with 1 n, like the i.p.
• Tighten the thread firmly, tie the marked n, rotate the binding, remove 1 p with 1 N as. p, knit in the opposite direction. In the past, you are tying with the next n together lp.
• Begin to knit 3 r, on both sides add in each p 2 pips. Only then turn the work, taking off 1 st with 1 n as an i.p. In the future, you will link and together with the next item
• Thus, the number n in 2 p will increase by 4 pieces.

Shawl with rim

The process of making the mating:

• After you have tied the rim, you will have 1 st - this is the first crt of the canvas.
• Type circular knitting needles on the inner side of the side of the rim in the following way: * 1 n, skip the rims, from the air and lift, dial 1 pt. Repeat from one * to the other *.Finish 1 n. Dial 1 kp = 187 on the starting line. Note that n is also the item
• . On the wrong side, tie 1 kr, * from the end, tie 3 n( 1 lp, 1 in, 1 lp), etc. Repeat from one * to another * 91 times. Finish knitting n, 3 n, 1 kr = in the end you will get 373 items.
• All the loops are tied with a handkerchief ornament. In 2 p, distribute evenly, remove 78 n, so that you get 295p.
• Central 7 mark, continue to knit with the help of truncated p. After pairing 42 cm, close the p as lp.

How to tie teeth to a downy shawl with knitting needles: pattern outline, description

• At the desired edge in the face of a handkerchief, type on the needles n, use the "face-to-surface" pattern. Draw from 3 to 5 p in both directions, given the width of the edging.
• After this, carry out the work in this way: 1 n, 2 l.p. together. In order to tie the border in the opposite direction, make the binding similarly, only using the i.p.

Crochet teeth

• Next work continue with LP, but initially determine the number p.
• In the places where there are n, fold out the fringing in half. So you get the edges, in the form of teeth.

Teeth on a scarf

How to tie a beautiful, delicate border to the scarf: Pattern pattern, description

If you are interested in how to tie a beautiful border to your scarf, use the following pattern.

Binding the shawl

Also a good version of the rim next

Border on the shawl

Knitted shawl on the head with needles from the mohair

If you decided to tie a down scarf, but, unfortunately, did not find the thread, then you can make it from mohair threads. Believe, the received product will look too beautifully and gently. Plus it will warm you in cold weather in winter.

Shoe size: 111 cm by 234 cm.

Special tools required:

• Yarn - 125 g
• Circular knitting needles number 5

Schematic diagram

The main pattern is bonded as indicated in the diagram. Only the facial p. From the wrong side, tie n, given the picture. Nakydy knit and etc. Convert once from 1 to 72 r, then repeat work from 57 r to 72 r. Do the extension of the pattern on both sides after the circuit is finished.

Mohair shawl

Knitting process:

• Dial 3 p, knit with the main pattern. Make additions so that the bevels are formed on your sides.
• When you connect the canvas with a size of 107.5 cm, bind 4 cm with a handkerchief pattern. Continue to knit from both sides, make extensions, as you did in 313 r.
• When tying 111 cm canvas, close the item

Knitted headscarf on the head with angora spikes

For the manufacture of this scarf, buy angora threads, knitting needles №4.5, №5, №6.Pattern as shown in the diagram.

Process of execution:

• Type on the needles 1 p, then continue to knit by the scheme, doing the addition of n. When you have a new ornament at the beginning of the strip, type 3 more pcs.
• Then tie a pattern from them, as indicated in the diagram. For example, as in 10 and 11 stripes.
• When you associate 11 reports in width, close the item. The height of the product should be 70 cm.

Scheme

Assembly:

• Type on the spokes at number 4.5 along the edges approximately 150 p. Use 1 g of rubber for 1 pc. Next, p of even n, tie 2 pt.
• . The total number should be 225 pts, then tie 2 p with the front face, go to the spokes at number 5. Produce 1 p with the front face, continue drawing as in the diagram with 21 p on30 rubles. Replace the spoke with this report. Take the number 6.

Knit shawl

End - close n according to the picture.

How to tie a handkerchief with triangular knitting needles, a scarf?

The next model of the scarf needs to be knit simultaneously with several patterns. The size of the scarf: 85 * 185 cm. To make the product, get merino or silk threads. Also you will have to take the knitting needles 3.5.

• Be sure to print it, starting from 1 to 48 strip. According to the scheme, you must bind with 3 n before the 1 arrow, then repeat the rapport, which is located between the arrows. Finish the job.
• Knit the product from the center with the elongated side. Dial 5 p, patch the pattern to 48 strips. In the following p continue to knit similarly. When tie 167 p, get 338 n.

Scheme

Finished product

• Continue to knit, as indicated on the diagram under the letter B. It shows the right side of the pattern from 1 to the last n. The left side is tied symmetrically.
• Go to work, as the diagram shows. When you reach 10 r of this ornament, close the item

How to tie a scarf-scarf with knitting needles?

This handkerchief is considered an ideal model for beginners. The kerchief is knit with the help of the facial smoothness, starting with an elongated corner. The product looks impressive, but due to the unusual selection of threads - generally stylish and fashionable.

The additional decor of the product here is considered a brush, located at the bottom of the kerchief. They are made of melange threads. This product is of a large size, you can even drape it with an unusual method.

Schematic

Scarf-scarf

Work process:

• Type on the spokes 3 n, to form the corner of the product. Continue to knit, expanding the handkerchief: in each 2 p and 4 p add 1 p. Use the facepiece to apply the accessory.
• Alternate every 60 r thread: first maroon, then melange. As soon as you knit 360 r, start at the edges of the product to decrease n in the opposite direction.
• So your product will take a triangular shape. Complete the work as follows: tie a scarf with maroon threads using a hook, attach brushes. You can make them from melange threads.

Video: We knit the scarf with knitting needles