How to make a big, magnificent and beautiful bow of tape on your head, for a gift, for an extract from the hospital? How to make a bow from a wide, narrow and thin ribbon with your own hands?

Make a beautiful bow of satin or kapron tape easy. With such an accessory, you can decorate a gift, a piece of clothing or an interior.

• In the arsenal of every woman there are secrets and tricks that make it possible to lighten and decorate our life.
• Bows made of ribbon and other materials are able to add a festive mood and complement the outfit, hairstyle, gift set, table setting and other interior items and clothes
• Many women think,it's difficult to make a beautiful bow
• But it's not so, all people are able to create a beautiful masterpiece
• You just need to prepare the materials and you can start such an interesting kind of needlework

Howmake a simple beautiful bow of ribbons with your own hands?

How to make a simple beautiful bow of ribbons with your own hands?

Earlier, bows and long ribbons weaved the girls into braids. At present, the first-graders are fastened with lush bows made of satin or kapron ribbons.

How to make a simple beautiful bow of ribbons with your own hands? The most simple and beautiful bow is obtained from a two-tone satin ribbon.

How to make a simple beautiful bow from ribbon of two colors with your own hands?

To make this decoration, you need to perform the following steps:

1. Prepare 20 cm wide ribbon( 5 cm) of light shade and 40 cm of dark-colored tape with a width of 2 or 3 cm.
2. Fold the wide ribbon and glue the ends as shown in the picture
3. Top attach20 cm thin ribbon and also glue the ends. Glue them to the folded ends of the wide ribbon
4. . The remaining 20 cm of thin ribbon wrap in the middle of the resulting "sandwich" and make a tight knot
5. . Thread the ends of the ribbon inside the knot or leave them loose so that the bow can be tied to clothing, hair or a gift wrap.

a few more ways to make simple bows:

A simple beautiful ribbon from the ribbon with your own hands

Beautiful ribbon from the ribbon with your own hands

Another way to make a simple bow can be seen in this video.

Video: How to make a BANTIK OF TAPE of any size?

You can make a beautiful bow from a thin braid, folding it into pieces in the form of "eight", and then stitching them in the middle. The more details, the more beautiful the bow will turn out.

Simple ribbon ribbon with your own hands

How to fold a bow from a thin ribbon?

Important: It's not difficult to make a simple bow. Be creative and in a few minutes the accessory for the holiday will be ready.

How to make a big lush bow of ribbon?

How to make a big lush bow of ribbon?

How to make a big lush ribbon from the ribbon with your own hands?

Make this simple bow:

1. Buy the tape of the correct width. The length depends on how lush the bow should be - 1 or 2 meters.
2. Fold the tape with the "accordion"
3. Tie in the middle with a kapron thread. The ends are left loose so that the product can be tied to a gift or to the hair
4. You can make a "sandwich" from individual glued elements, bandaging in the middle of the

Another way to make a magnificent bow. Prepare 2 meters of white tape and a small bead.

The big magnificent bow from tape

Such "royal" bow forms from separate small details-bows which are sewed to the basis from a white felt. In order to make small elements, perform the following steps:

1. Cut the ribbon to equal lengths of 10-20 cm, depending on the size of the bow
2. Fold in half, the inside out
3. From the bent line, 2 cm apart, it is necessary to dripglue and squeeze this place with tweezers so that the tape will stick together
4. When the glue dries, unscrew the bows and make the pleat at the ends
5. Fix the ends with a thread and sew to the base
6. Decorate this bow with rhinestones, gluing them to the middle or beads of different colorss. All - the product is ready

How to make such a "royal" bow, you can see in the video.

Video: Lush bow for graduation to kindergarten

It's worth noting: You can put this decoration on your daughter's graduation kindergarten or on September 1st. It perfectly complements and a gorgeous dress or school uniform.

How to make a bow of a wide ribbon?

How to make a bow of a wide ribbon?

Often, a suit of an adult or a child needs to be matched with a bow tie. Of course, you can buy it in the store, but not always in the range there is a suitable coloring. Therefore, you need to make such a tie yourself.

How to make a butterfly bow from a wide ribbon?

Perform the following steps:

1. Prepare a 20 cm ribbon with a width of 5 cm and 18 cm of tape with a width of 3 cm.
2. Fold the pieces in half and glue the ends. Fix them with a needle so that the adhesive fits the edges well
3. When the glue dries, put one element on the other and make the stitches in the middle of the thread.
4. Pull the thread and secure the
5. . In principle, this is enough, but you can tie the seam area with a thin tape in tone."Butterfly" is ready

From the wide ribbon we get beautiful "roses".How to make such an original bow from a wide ribbon? It's simple.

How to make a bow-rose from a wide ribbon?

Perform the following steps:

1. Wind the tape on the hand as shown in the picture
2. Make the knot and remove the product from the hand
3. Straighten the rose petals, bending them inwards
4. Do this all the way to the last petal
5. The more luxuriant the rose, the longer the

tape should be Howto make a bow of thin ribbon?

How to make a bow of thin ribbon?

Stylish and attractive on any piece of interior or clothing looks bow of a thin ribbon. He adds refinement and elegance. How to make a bow of thin ribbon?

For decorating gifts, a festive table and as an accessory for clothes, the "Dior" bow is often used.

How to make a Dior ribbon from a thin ribbon?

To make such an accessory, follow these steps:

1. Prepare 1m wide 1-2 cm wide strip
2. It needs to be cut into lengths of different lengths. The number of these segments will depend on how much magnificent bouquet you want to make. The length of the turns make this size so that this bow lies down along the entire length of the packing box, the longer the coil, the more beautiful the
3. Finished coils stack on each other, gradually reducing the size of each coil
4. The last coil should be no larger than 1 cm in diameter
5. Fix the received bowthin tape in tone, inserting it into the last coil
6. Such an accessory can be attached to any surface: flat or round

Sometimes you need to make a lot of small ribbons of thin ribbons. This will help conventional fork. Perform the following steps:

1. Prepare a satin ribbon with a width of 0.6 cm and a table fork
2. Place the tape on the fork, leave the ends at least 4-5 cm
3. With the left edge of the tape wrap around the fork and guide it forward, poking it between the middle teeth
4. .Do not tighten this loop, push the end of the tape, but already on top of the fork between the teeth
5. Put the end of the tape in the loop from the bottom and tighten
6. Remove the bow from the fork and cut off the excess tape along the edges
7. Burn the cut ends of the tape with fire( with a lighter or match)crumbled. Such bows can be made as much as necessary - quickly and easily

More detailed instructions on how to make a bow with a fork and thin tape can be seen in the following video.

Video: How in 2 minutes to make a cute bow of satin ribbon and a regular fork?

How to make a bow of a narrow ribbon?

How to make a bow of a narrow ribbon?

Such an elegant accessory can decorate a gift, a piece of clothing, table setting or even hair. A thin ribbon makes an elegant and magnificent bow. How to make a bow of a narrow ribbon?

Complete the following steps:

1. Prepare a narrow band of two colors and cut out a 2 cm diameter circle from the cardboard
2. Cut the tape into 5-7 cm pieces
3. Now apply a glue drop on the cardboard wheel and glue the edge of one of the strip pieces. After 0.5 cm, once again apply a drop of glue and glue the second end of the tape
4. Between the glued ends of the tape, apply again the glue and glue the end of the tape in a different color. Attach its second edge next to the edge of the tape that was glued to this
5. Repeat this until several rows of such loops are pasted. The last 2-3 rows can be made smaller, and in the middle attach a bead or rhinestones

Important: When you paste the pieces of tape, pass each end through the previous turn. Thanks to this reception, the bow turns out to be magnificent and beautiful.

A good example of how to make such a bow can be seen in the following video.

Video: Lush Bant of Narrow Satin Ribbons / Kanzashi master class

How to make a bow on your hair?

How to make a bow on your hair?

The bow with your own hands for the decoration of the hairstyle turns out to be original and beautiful. You can be sure that only you will have such an ornament.

How to make a bow on your hair? Perform the following steps:

1. Prepare 2 pieces of tape 5 cm wide and 25 cm long, and thin tape for the middle of the
2. Take one piece of tape and bend the corner at one end of the
3. . Second fold the corner with the corner near the first folded end. Then bend the resulting corners to each other. Fix the folded coil with the
4. needle Now next to the folded corners, make another turn and secure with the
5. needle. As if turning the resulting product over, make a corner again to make a rhombus. Do this until one small triangle of the tape is left.
6. Fold the "diamond" in half, and once again in half. Now you need to "fold" the rest of the edge of the tape. It turned out triangle
7. Keep it for the center, so that everything that we folded did not open. Remove all needles
8. The inner triangle is bent to the center to get the original "petal"
9. Screw with a needle and thread where you hold the fingers
10. These parts need to be made with two pieces
11. Sew these parts and band in the middle with a thin tape
12. SewThis bow to the elastic band or glued to the barrette, and a unique accessory for the hair is ready

Detailed instructions are in the video, thanks to which it will be easier for you to make a beautiful hair bow.

Video: MK - how to make a HAIRBONE from a satin ribbon?

How to make a bow from a nylon ribbon?

How to make a bow from a nylon ribbon?

If your daughter goes to first grade, then she should have the most beautiful and magnificent bows. How to make a bow of nylon ribbon?

Make a magnificent and beautiful bow simply. If the magazine does not have a tape you need a width, you can use a cut from the organza instead.

To make a bow, perform such step-by-step actions:

1. Prepare two ribbons with a width of 7.5 cm and a length of 140 cm.
2. Fold it in half in half. Now the folded edge is threaded with the needle
3. When all the tape is sewn, remove the thread until the strip turns into a 40 cm long piece
4. Fix the thread and straighten the product along the entire length of the
5. Do exactly the same with the second tape
6. Cut out the circlefrom a felt or from a dense ribbon with a diameter of 7.5 cm
7. Make two holes in a circle and insert a thin ribbon or ribbon in the tone of the bow
8. Apply glue along the edge of the base and glue the first prikabrennuyu tape
9. Continue to spread the base of the glueglue tape in a spiral. When the first tape is finished, continue to paste the second tape
10. . When there is little space on the base, cut off the excess tape and secure the thread.
11. Stick the entire tape, promazyvaya base in the middle. Do not forget to cauterize the edges of the tape so that it does not crumble

See how it should be done in a video.

Video: Lush organza bow. Master class

How to make a bow of paper tape?

How to make a bow of paper tape?

A paper bow can effectively decorate a gift box or table setting. How to make a bow of paper tape?

How to make a beautiful bow of paper tape?

Making a paper bow in stages:

1. Prepare 12 pieces of tape 2 cm wide and 25 cm long, and one 5 cm long tape for the middle of the
2. Begin to fold the large pieces with a "figure-eight" as shown. The edges can be stapled or glued with hot melt. Assemble the small tape to get the
3. ring. When all the parts are ready, start assembling the bow, nicely positioning the turns and gluing together
4. . The smallest coil is stuck in the middle of the
5. . On the reverse side, using a stapler, attach a thin tape or the same tape thatwas used to create a bow

The master class of making such an accessory can be seen in the video.

Video: Gift BAN from PAPER with your own hands

You can make a paper bow in a different way, as shown below.

How to make an original bow of paper tape?

In this method, the ribbon is not cut into pieces, but is added together by "eight" into a single structure. In the middle the flower is bandaged with a thin paper tape.

How to make a ribbon from a tape on an extract?

How to make a ribbon from a tape for an extract?

When a newborn is discharged from the maternity hospital, this is an important event, and everything should be perfect. Therefore, you can make a bow for an envelope of a newborn with your own hands. How to make a bow of a tape on an extract?

Tip: Choose a ribbon beautiful, for example, with gold edges, so that the flower is elegant.

Implementation in stages:

1. Make pieces of pink or blue satin ribbon, ribbons with gold edges of the same colors, a usual satin ribbon and tapes with a pattern
2. . Collect the flower from a wide satin ribbon. Fold the tape in half and sew with a thread with a needle. Also, do with all the satin slices, collecting them together in a circle. After finishing, fasten the thread
3. . In the same way, assemble all the tapes. You should get 4
4. flowers. Apply the hot glue on the felt base and start gluing flowers, first large, then descending
5. . In the middle, make petals of thin tape with a pattern, gluing together the edges of the segments of this braid
6. The last step is gluing beads or rhinestones. The bow is ready for

. See how the girl in the master class does this in the following video.

Video: Bant on an extract from the hospital. Master class from tapes

It is not difficult to learn how to make such bows with your own hands, and when there is a lot of experience, you can even earn money on this kind of needlework. For example, you can decorate banquet halls or create accessories for costumes and hair.

Video: How to Make a Bantam Flower from a Ribbon?