Bird feeders for birds from plastic bottles with their own hands: ideas, description, instruction, photo. How to make a bird feeder from 1.5 liters, a large 5 liter plastic bottle, from 2 bottles?

Production of bird feeders from plastic bottles.

Contents

How to make a bird feeder from a 1.5 liter plastic bottle in stages?
How to make a bird feeder from a 5 liter plastic bottle?
How to make a bird feeder from 2 plastic bottles?
How to make a simple bird feeder from plastic bottles?
How to make a beautiful bird feeder from plastic bottles?
How to make an original winter bird feeder from plastic bottles?
How to decorate a handmade bird feeder from plastic bottles?
Beautiful self-made bird feeders from plastic bottles, ideas for feeders: photo
Video: Creating an excellent bird feeder

The bird feeder is a very necessary thing at the beginning and at the end of winter. After all, birds need food especially in this period. In this article, we will learn how to independently produce feeders from plastic bottles, because this is the simplest means for obtaining an excellent result.

How to make a bird feeder from a 1.5-liter plastic bottle in stages?

instagram viewer

Feeding birds is not only an interesting activity, allowing to observe the birds, but also brings huge benefits to living nature. Feeders are made from a wide variety of materials.

One of the most popular and easy to make is a feeder made from a plastic bottle. It has a number of advantages:

availability of
is cheap( you do not pay for it, it is given "in load" to the drink)
easy to manufacture( thin plastic is easy to cut and bend)
protection of food from wind and precipitation
resistance to swingstemperature

We offer the following kinds of feeders from plastic 1.5 liter bottles.

"Original"

Prepare:

as a bottle
2 spoons wooden with long handles
wire

Execution:

walk away from bottle bottoms 7-10 cm
from two opposite sides two holes opposite each other
insert one spoon through them
back downup another 10 cm
, the next hole is done so that the second spoon, passed through them, is located perpendicular to the first
near the wide sides of the spoons, widen the hole a bit -m it will be easy to get enough sleep
with wire tie up the neck of a bottle
hang on a tree

"Bunker"

take 2 1.5 liters of a bottle
at the bottom of one make 2 round holes( retreating from the bottom about 8 cm)
the second bottle is turned and inserted into the hole of the first
the neck should not reach the bottom a bit
, pour the grain or any food for the birds
the birds will eat the food, and the next portion of it will gradually pour out more

How to makebird feeder from a 5-liter plastic bottle?

Plastic bottle of 5 liters is one of the most suitable materials for making feeders, as it:

has a wide bottom on which more birds can fit.
has a good capacity allowing to fill a lot of food

We offer two types of feeders from this container:

Horizontal:

put the bottle on the side
on two opposite sides with a marker draw the horizontal rectangles
with a sharp knife cut through the outlined lines the bottom and sides of the rectangles
piece of plastic bend up
walk along the fold line with pliers - the visor protects the birds from the
rain in the bottom of the bottlemake two holes opposite each other
pass through them a wand - turned out to roost
with a needle on the bottom of the feeder pierce the small holes through whichdrain the water during the rain
make a hole in the bottom of the bottle
thread through it the rope
tie the other end of the rope on the neck
hang the feeder for the resulting loop on the wood

Vertical:

on all sides of the bottle cut the large enough windows
cut fromold cable 4 pieces, the length of which is equal to the width of the
window, cut the cable along the
put the resulting blanks on the bottom of the windows - a reliable protection was obtainedof your birds from the injury
below the windows make holes
through them pass the sticks-perches
in the bottle lid make a hole
draw through it a wire or a rope
tie, making a loop

How to make a bird feeder from 2 plastic bottles?

Two of the plastic bottles make it easy to make practical self-filling feeders. We offer the following methods.

Method 1:

Take 2 identical bottles with a volume of 1.5-2 liters

in the bottom of one bottle make a few small holes to remove moisture

cut off the top - it will not be needed

at the top of the remaining bottom part make holes

pull the tape through them and fasten it, tying the nodules inside the tank

from two opposite sides, cut the windows

the second bottle fill up the food to half

turn it over and insert it into the cut off bottle so that between the neck and the bottom there was no distancemore than 0,5 cm

wrap the structure with a wide tape on the joint of the

bottles hang by the tape

Method 2:

prepare bottles of 5 liters( the feeder base) and 1-1.5 liters( feed dispenser)
in advance make a measurement of the containers - a small bottle should be placed in a large one, resting on its neck with its lower part
in a large baklag on two opposite sides cut out the incisions for birds
in the lid, make a hole through which pass the rope fastening
Cut the bottom of the bottle of small volume
on its neck with a hot nail, make 2-3 holes, from which the grain will pour.
insert the small bottle into the large
with the neck downwards. Fill the
food with the cover wrapped with the rope loop
. Hang it on the
branch, it looks like thisfeeder made of bottles of contrasting color

Method 3:

will need a thin plywood and two bottles, one of which is slightly larger than the other
cut a large bottle into three equal parts, from which only the bottom and top of the
are needed, cut the tops of the top with smooth waves, and cut the neck - it turned out to be a "plate" with a hole in the center
in the bottom of a small bottle cut the hole in which the
food will be poured approximately in the middle of this bottle puncture the holes
thread the rope through them and tie it so that you can then hang the
structuree of the neck of a small container pierce several holes
flip this bottle and thread its neck into the "plate"
in the center of the plywood cut the circle
put the plywood on the neck
screw the lid - it's got a place for planting
pour the feed into a small bottle through the hole
covercut off the bottom of a large
as a rope

How to make a simple bird feeder made of plastic bottles?

In the case when there is no time to make a complex feeder, and the desire to help poor birds is present, you can use our options for making the simplest feeders from a plastic bottle.

Option 1:

take a bottle in volume from 1,5 to 5 liters
back from the bottom about 4-5 cm
with a sharp knife, make a wide hole
cover the edges of the hole with electrical tape so that they are not too sharp
put a piece of thinplywood or other dense material( tile, linoleum) in order to weight the feeder
to the neck of the bottle tie the wire or rope
fasten on the branch
do not forget to fall asleep the food

Option 2:

for 5Lcut off the bottom and throat
position the resulting cylinder horizontally
in the top of the workpiece on the sides make two holes
pass through them a rope or wire
for the resulting loop hang on the branch
inside pour grain or pieces of old bacon fat

Option3:

prepare a 2-liter bottle of
cut off the top of the
from the bottom about 7-8 cm with scissors, cut off the front of the
bottle with the prepared feeder usingScrew the screws behind the back wall to the fence, the wooden wall or the tree trunk.

Prepare the corn, cereals and seeds

for the trough How to make a beautiful bird feeder from plastic bottles?

Bird's "dining room" can be not only practical, but also beautiful. This is not difficult at all. It will take only a little time and patience. We offer a choice of such nice canteens.

"Colorful house"

Prepare:

two-liter bottle
cord
paint

Do it easily:

cut off the top of the tip to the label
the edges can be cut with waves
the bottom of the bottle adjust the height and cut the excess
make a large hole - the entrance of the
with a hot knifeflatter the slices so that they are not too sharp
paint the workpieces with bright colors
on each side of each workpiece make symmetrical punctures with a hot nail
put on top of the buCushions on the base so that the holes coincide
thread the cord and tie the knots inside the bottom of the
in the bottle cap make the hole
thread through it the bundles of the string and pull the
on both sides of the window, connect the rivets to the roof and the base of the trough for additional fastening
decorate the trough with bowsor buttons with hot glue

Bright feeders

needles

deep plastic tray

bolt with

nut a beautiful ribbon or tourniquet

Manufacturing process:

in the center of the dish and bottle cap make a hole

fasten them together with a bolt andnut

at the neck of the bottle pierce with a hot nail a few holes to feed the

at the bottom of the bottle make holes through which to stretch the tape

put the grain in the bottle

tighten the lidattached

plate flip and hang by the ribbon

Feeder with a bowl

Of several

bottles Prepare:

1 bottle of 2 liters

4 bottles of 1-1.5 liters

wire

How to do:

take a large bottle and make a marking, stepping backfrom the bottom about 7 - 8 cm

on four sides make holes that have a diameter slightly less than the width of the neck of smaller bottles

cut off the small bottles of the top so that one side of the resulting funnels was slightly elongatedth

insert the necks of the funnels into the holes of the large

bottle, turn them long side downwards - have received comfortable roosts for the birds

to the top of the large bottle thread the

wire form the

loop fill the feeder with

feed screw the lid and hang on the branch

From the vinyl plates:

Materials:

2 liter bottle

two old plates

twine

hot glue

Feeder with plates

Manufacturer:

plate put on an iron pan

put in a hot oven for 3 minutes

add a softened plate shape to the bowl( work in protective gloves!)

in the center make a hole in the diameter of the lid from the bottle - this workpiece will serve as the roof of the

feeder, make a bowl from the second plate in the same way, but withoutholes - this will be the basis of the

feeder while the vinyl is hot, make 4 holes along the edges of the plates, which will be used to pass the

string at the very bottom of the bottle, pierce the feed holes - the food bin

turned outwith hot glue, glue the vinyl "plates" to the bottle( the holes in both plates should be placed one above the other)

thread the string through them and hang in a suitable place

How to make the original winter bird feeder from plastic bottles?

Did you know that more than half the birds in our latitudes do not live to see the spring? They are dying of hunger. We can help the feathered survive the cold by feeding them.

The "right" winter bird feeder must meet the following requirements:

have a roof that prevents snow from falling asleep for food for birds.

walls must be high enough that strong wind does not blow out the food

mount should be good, because wind gusts canto tear the product from a tree

be made of a dense material, not afraid of low temperatures and moisture

We will show you how to make a practical winter feeder.

Method 1:

prepare 1 bottle of 5 liters and 2 bottles of 1.5 liters of

on the three sides of the big eggplant, mark the places for the windows: one large and two smaller

with a knife make slits in the form of an inverted letter P

bend the cut pieces upwards like visors - turned outthe

feeder base in one small bottle puncture holes in the bottom and slightly above it

insert this container inside the baklag - the base

in the big bottle cap make a hole through which the throat of the inner bottle of

can passcover on the eggplant. The neck of the inserted container should rise above the lid

cut from the second small bottle top of the

cut off the neck of the

the resulting funnel should be put on the neck of the inner bottle

, pour in the food and tighten the lid

The bird feeder

Method 2:

will need a 1-1.5 l and an old plastic container with a lid

in the center of the lid from the container make a hole in size slightly smaller than the bottle neck

on the sides on the lid of the containerscut the large windows - the entries for the birds

in the cap of the bottle penetrate the hole through which the food will be fed

put the food in the bottle

screw the lid

insert the bottle into the opening of the lid from the

container close the container with the resulting

structure make a fastener from twine or wire

Feeding troughwith a bright input

Method 3:

take 3 5-liter

bays. Make large holes in them - the inputs on one side of the

cover the outlines of the

with the help of boscrews and screws, connect the bottles to each other so that the windows for birds come out

make bottles in the bottom of the bottles and insert the

stick sticks with wire or rope around the neck of the eggplants, make a fastening in the form of a hinge

, a very large bird feeder

bird feeder

How to decorate a handmade bird feeder from plastic bottles?

The bird feeder can become a real decoration of the garden or window, if you show your imagination and make some effort. Involve children in this process. This lesson will not only contribute to the development of their skills, but also teach them to be merciful to our lesser brothers.

You can decorate the plastic trough by using different methods:

paint with colored paints

with vinyl applications

wrap with PVA glue

Original trough

Beautiful trough

Feeding trough with spruce branches

Feeding bird

glue on top natural materials: cones, rowan berries, dry leaves, spruce twigs

fastening make of curly wire

okleit round pieces of plastic spoons

However, do not forget that glvnoe in the manger did not design, and timely content feed.

Beautiful self-made bird feeders from plastic bottles, ideas for feeders: photos

We offer you interesting ideas for creating feeders by yourself. After all, the craft must be not only practical, but also beautiful.

Decorated feeder

Feeder with spoons

Openwork feeder

Bright feeder

Feeding trough

Original feeder

Bright feeder

Very beautiful bird feeder

Video: Creating an excellent bird feeder