Variants of simple ways of sewing a nightgown.
Contents
- How to make a pattern of your nightgown with your own hands?
- How to sew a warm and long woman's shirt?
- How to sew a nightcap with your own hands beautiful: a pattern
- How to sew a silk woman's shirt with lace?
- How to sew a nightgown without a pattern?
- How to sew a women's shirt: a pattern for girls
- How to sew a women's shirt for full?
- How to sew a woman's nightie for pregnant women?
- How to sew a woman's nightie for nursing moms?
- Video: Nochnushka for girls( nightgown) with their own hands
For women, any wardrobe item, except for necessity, carries a plume of additional reasons for purchasing a new model. Nightgown is no exception. After all, in addition to warmth, comfort and hygiene, she gives a woman a lot of positive emotions.
Agree, elegant shirt, tailored to suit all the strengths and weaknesses of the figure, is able to transform fashionably the lady of any age.
You can certainly buy a ready-made charm in the store. But the self-made intimate garment gives a huge creative range to the creation of an individual model.
How to make a pattern of your nightgown with your own hands?
Drawing a pattern requires certain skills.
Therefore, we will begin work with the simplest version.
Prepared:
- Fabric cut: 2 m long, 70 cm wide
- Beautiful lace
- Scissors
- Chalk
- Ruler
- Centimeter
- Whatman or millimeter paper
We will build a similar pattern:
- On the prepared paper, draw the rectangle "ABCG":
- »AG» - the length of the nightie
- »AB» - measured in the chest part + 1,5-2 cm
- From the point "A":
- Measure 7 cm to the right side - "D"
- 2 cm at the bottom -"D1"
- We connect these points together - we get a neckLay off the back
- 8 cm down - is "A2".The segment "DD2" is formed for the front neck
- We proceed to the construction of the sleeve
- From "B" we measure 10 cm, fix the "K", from it 16 cm downwards - "K1"
- Next we draw the perpendicular from "K1" to the side of the rectangle "BV".The intersection point is "F"
- We designate "E" and "E1" from it, laying 7 cm to the right and down. We connect the points with a slightly curved line, we get the armhole arm
- We form the hem
- From "B", we build a 7 cm long segment to the right - "B1"
- Connect "B1" to "E"
- From "B1", at a distance of 2 cm upwards,»AND»
- Round the corner with a smooth line - from "I" to "B"
- Cut out the finished template, transfer it to the fabric
- Cut it in half, the wrong side out
- Apply the pattern to the fabric, fix it with the pins
- Carefully circle the chalk, adding to the allowances 1, 5-2 cm
- We cut out the fabric blank,sewing them
- side and on the shoulder seams basting zhivulku
- hem and sleeve edge bends twice zhivulim
- put flat top machine seam around the neck
- sew piping, a cut on the bias, with the one edge side. Apply the front side to the front side of the
- product. Then, the remaining free side is tossed to the wrong side, we fold the edge by 0.5-1 cm, sew it with a straight line( you can first bait if there is not enough experience)
- All the auxiliary threads are removed
- Sewlace
- Ironing finished product
How to sew a warm and long woman's shirt?
Based on the previous pattern, we will build a more complex pattern. We add a detachable yoke and gusset. In other respects, the principle of action is similar.
- After the pattern is ready, we transfer it to the fabric, cut it out
- We connect by stitch the upper and lower part of the gear, to form the yoke
- Sew the gusset, as shown in the picture
- We machine the side seams and sleeves
- We cut the hem
- We workneck
- All is well iron
How to sew a nightie with your own hands beautiful: pattern
Chic dress, beautifully emphasizes the chest.
How to sew a silk woman's shirt with lace?
An elegant shirt made of silk is easy to sew, if there is a practice of working with a silk fabric. Cutting and further processing, due to the sliding structure of the material, create certain difficulties for beginner tailors.
If you have confidence in your experience, let's get to work.
You can take as a basis the template shown in the figure.
In our example, we will cut using any size shirt.
- On the sheet of the paper we pin the chosen model
- We carefully outline the silhouette
- From the shoulder line down we draw the dash, the desired length of the shirt
- To give the trapezoidal shape, from the edges, the armhole to the bottom, we draw on both sides of the line, expanding the silhouette The length of the segments should be equal to the length of the finished product
- We connect the end points - we get the hem of the shirt
- We form the detachable yoke under the chest
- Cut it apart from the whole pattern
- For the shirt, the armhole is deepened by 2 cm, we cut off the extra
- Inspect the overall silhouette of the pattern, if everything suits, cut out the
- If necessary, adjust the cutout
- We cut the fabric, adding 2 cm to the allowances
- The coquette is cut from the lace fabric
- We sweep the side seams of the bottom part of the parts from the wrong side
- We process the seams in zigzag,using an iron every seam
- Attach the details of a lace coquette, machine seams, to the main part of the product
- We cut out the thin straps
- Fold each strap with the front side inwards,so that you can make a beautiful seam and fabric do not climb out, sweep, put a straight line along the edge of the straps
- Iron parts so that the seam is in the middle of the straps
- Now fix them with a machine stitch to the back, and the front part of the nightie. The seam on the straps should be on the underside of the product, that is, afterwards touching the body of the
- . The bottom of the product is folded twice, we sweep the
- . We attach the lace tape to
- . We sew with the
- machine. We remove the auxiliary threads.
- . We smooth the
- . We decorate with a bow of satin ribbon.
How to sew a nightgown without a pattern?
We do not remove the measurements, we use any summer dress of the right size for the pattern.
For sewing a shirt we take:
- Liked fabric cut - two lengths of the finished product
- Baker cut by oblique
- Lace, satin ribbons - optional
- Tailor scissors
- Dry soap piece
- We lay out our sarafan on the fabric at an angle of 45% to the hem. The product will be slightly trapezoidal, it will lie along the body with beautiful waves
- Circle the outlines of the transmission and the back, very carefully
- We cut the obtained parts with scissors, leaving for the joint stock - 1-1,5 cm
- We sew the side seams of the fabric patterns from the wrong side,then we spend it on the machine
- The seams from the inside are ironed, processed with the help of the overlock
- To the neck we take the oblique bake
- We are weaving the straps, the conceived width and the required length
- Soap we mark the points
- We make the machine stitch, before the fixed points
- We insert the straps, we spread everything with a solid seam
- To lay down the smooth waves, we prepare the slit skewered zigzag
- Then we decorate at our discretion, or leave the former view
HowSew a woman's shirt: a pattern for girls
Those who have elementary sewing skills, it will not be difficult to sew such an original shirt for the beloved daughter.
How to sew a women's shirt for full?
- We measure the chest girth, the length of the shirt
- Add to the length of 9 cm to the allowance
- The breast hold size is multiplied by two
- Cut from the material a rectangular shape, given the size of
- Fold it twice and draw a diagonal line to give the product a flared silhouette
- Cut out the basic pattern
- Cut a few rectangular parts. In the future we will make the nightdraw's jewelry with ruffles
- We use any t-shirt of the appropriate size to form the armhole
- Sew the front and rear parts on the side
- Work one by one:
- Hem
- Top of the product
- Lines
- At the edge of the shelf sew a narrowgum
- From the prepared pieces of fabric we sew two rectangular details. For this, bend them in half, bend them in two, spread out the
- One edge of each resulting strap we sew the previously sewn ruffs
- Tighten the straps
- Try on a gentle and comfortable nightgown
How to sew a female nightie for pregnant women?
A good option for future mothers - a shirt consisting of a skirt and a bodice. In the expanded lower part, in the form of a trapezoid, the growing tummy will fit well.
We proceed:
- Cutting bodice is equal to 1/2 chest girth, plus 10 cm
- To the width of the bottom we add from 30 to 50 cm, depending on the desired width
- The bodice is cut using a top or jersey,paper
- Next, draw contours, making around the edges allowance 3-4 cm
- Spin of the upper part is made in the form of a rectangle equal to the width and height of the front cutting edge
- Cut out, oblique: rectangular details for straps,
- Make folds along the top, on the back and front of the skirt
- The bodice shape is underlined with taps: depth -2 cm, height 4
- We combine the two parts with the front side inside
- We fasten the pins
- We grind, we sweep the top and side seams
- We tape, we sew the straps, we process the hem
How to sew the femalea nightie for nursing moms?
- Using a simple pattern, sewing a shirt with a cut, for easy access to the chest
- At 44-46 size, you need 1 meter of knitted fabric with a width of 135-150 cm
- Necessary measurements are indicated in the photo of the pattern
- Uncrossing the fabric,shoulders products, we sew the hem
- The neck and the edges of the armhole are edged by the bake, which is prolonged in the form of strings
- We retreat 20-25 cm from the center of the front neck, we attach 2 rows of bobbin gum, leaving the distance between them 2 cm
An important condition when sewing a nightgown is the choice of fabric.
It should be pleasant to the touch, soft and necessarily natural. Then the product will give comfort and coziness, and the dream will be pleasant and strong.