Ways of manufacturing electronic, humane and plastic mousetrap.
Contents
- How to make a mousetrap from a plastic bottle and how to charge?
- How to make a mousetrap adhesive?
- How to make a simple mousetrap and how to charge?
- How to make a humane mousetrap: drawing, charging instruction
- Electronic mousetrap with your hands: diagram, instruction manual
- VIDEO: How to make an electronic mousetrap?
Rodents at the dacha and in their own home are not cute neighbors, but evil enemies. They are not only able to destroy the supplies of mixed fodder in the shed, but also cause a lot of inconvenience. Some hungry individuals are able to gnaw the insulation of the wires, which often provokes a short circuit.
How to make a mousetrap from a plastic bottle and how to charge?
You can fight rodents with the help of improvised tools or poisons. Do not use poison if you have small children or pets in your home. In such cases, you will gain a mousetrap, which you can make yourself. A fairly simple and affordable option is a trap from a plastic bottle.
Materials:
- Plastic bottle
- Stapler or wire
- Scissors
- Bait
Instructions for manufacturing a plastic bottle trap:
- Take a two-liter bottle and cut it into two pieces. The upper part, where the neck, should be half as much as the lower one.
- Put the part with the neck into the other part of the bottle, it should look something like a watering can in a glass.
- Lubricate the neck with sunflower oil. This will increase the slip. Put the food inside the container, that is, at the bottom of the bottle. It will serve as bait.
- Re-attach the part with the neck and attach it with a stapler or wire. This will prevent the neck from slipping inward.
- The mouse will be able to squeeze through the slippery neck inside the structure, but it can not come back.
How to make a mousetrap from a plastic bottle and how to charge? There is another option for making a mousetrap from a plastic bottle. In this case, the principle is based on the rotation of this bottle.
Materials:
- Adhesive tape
- Plastic knife
- Lure
- Bucket
- Rack
Instruction:
- Take a small plastic bottle and pierce it along the needle.
- The edges of the spoke are placed on the bucket. Attach the bait to the bottle with tape.
- Put a board on the bucket to make it look like a roller coaster. The mouse will rise to the bait and fall into the bucket due to the rotation of the bottle.
How to make a mousetrap from a plastic bottle and how to charge? How to make a mousetrap adhesive?
This is also one of the simplest options, but not very humane, since the rodent can no longer get out of the glue and is killed. For such a trap, you need to purchase a special glue in the store. It is called "Glue from mice".
Materials:
- Piece of cardboard
- Glue
Instructions for using the glue trap:
- You can choose cardboard or plastic pallet as a basis.
- Apply a layer of glue on the pallet, and put a piece of cheese or something to eat in the center.
- Arrange the trap in the center of the house and wait. A hungry mouse will come for a treat and stick to the trap.
How to make a mousetrap adhesive? How to make a simple mousetrap and how to charge?
The simplest version is a mousetrap from a bucket and a ruler. It is made very simply.
Materials:
- Bucket
- Ruler
- Knitting long needle
- Lure
- Adhesive
- Board
PIECE MANUAL:
- Take the bucket and fill it with water one third. Lay a little closer to the center of the bucket of the spoke, and on it a ruler or a thin wooden rail.
- Attach the bait to the end of the rod or ruler. Make a path to the bucket from the board. The mouse will climb the ditch like a bridge, and get on the ruler.
- Once the center of gravity has shifted, the ruler will bend towards the water and the rodent will fall into the bucket.
- It's easy to charge such a trap. It is enough to put a piece of cheese or something edible on the edge of the ruler.
How to make a simple mousetrap and how to charge? How to make a humane mousetrap: drawing, instruction for charging
There are a lot of options for manufacturing a humane mousetrap. To do this, you can use a glass jar or a plastic bottle. Such traps do not kill the rodent, but leave it whole and unharmed.
Tools:
- Plastic bottle
- Rope
- Nail
- Lure
Instruction:
- Nothing to cut and do not have to make. It is enough to choose a suitable bottle.
- You can not help by the way is a plastic bottle of juice.
- Tie a rope to the neck, and connect the other end of the rope to the nail. You can just tie a rope to something heavy.
- Now put the bait inside the container and put the bottle in an unstable position. The mouse will fit into the bottle, and when it gets to the bait, the center of gravity will shift and the container will fall.
- Since the bottle is on a rope, it will remain hanging. You can release the mouse to the street and not kill it.
How to make a humane mousetrap: drawing, charging instruction Electronic mousetrap with one's own hands: diagram, instruction manual
The operating principle of such a mousetrap is quite simple. There is a motion sensor on the mousetrap. As soon as it works, a low discharge of current is applied and the animal kills. People who know a little about electronics will be able to make a similar device. Instructions for making an electronic mousetrap can be found in the video. Several electronic circuits for collecting the mousetrap are presented below.