How to sew toy soft furniture for dolls with their own hands: master class, photo. How to sew a doll's soft sofa, an armchair, a bed, a puppet puff with your own hands: schemes, templates, stencils, photo

Luxurious doll furniture by their own hands: simple and understandable master classes.

Contents

How to sew toy soft furniture - a bed for dolls, own hands: master class, diagram, photo
Video: Cradle. Miniature for dolls with their own hands
How to sew a doll's soft sofa with your own hands from improvised materials: templates, stencils, photos
How to sew a doll's soft armchair with your own hands from improvised materials: templates, stencils, photo
How to sew a puppet soft ottoman with your own hands from improvised materials: templates, stencils, photo
Video: How to make a beautiful ottoman for dolls?
Video: How to make a chair-bag for a doll?

When a daughter appears in the house, mom again experiences all her childhood: dolls, fairy houses, delightful outfits and much more. And for needlewomen this is a real fairy tale - after all, there is an opportunity to do so much with your own hands! In this article we will tell you how to create unique furniture for dolls from textiles and not only. But the most important thing is that most of the materials often lie idle by the needlewomen! These are pieces of fabrics, and delightful remains of lace and multi-colored laces and much, much more!

instagram viewer

How to sew toy soft furniture - a bed for dolls, with their own hands: master class, diagram, photo

In this small master class we will tell how to sew a bed for dolls by oneself. For this we will need:

Remains of a multicolored or bright fabric;
foam rubber or sponge for washing dishes;
4 covers from plastic bottles;
A bit of cardboard;
Synthesis residue;
Pistol with hot glue;
Ribbons, laces, beads and other decor if desired.

Draw a pattern of the head of the bed, we have it 8 cm wide and 7 cm high, but you can choose a different size, depending on the size of the doll.

Cut out the headboard of a bed of cardboard, as well as two parts from the centepona.

Now cut out two pieces of fabric with an allowance of 1 centimeter.

Fold the fabric face to each other and spend with an allowance of 5 mm around the perimeter except for the lower part of the headboard. In the corners cut the fabric slightly so that it does not pull when it is turned out. In case the fabric is elastic( for example, supplex), it is not necessary to make incisions. After this, unscrew and iron.

We lay a layer of sintepon, cardboard and top cover with a layer of sintepon, we sew as on a photo from all sides.

Pull the fabric cover over the synthetic cloth, which we already pre-ironed. We correct the seams as necessary, so that nothing will stick. Please note that at this stage we are not sewing down yet.

How to sew toy soft furniture - a bed for dolls, with their own hands: step7

And now the time for decoration! Around us we lay a cord of artificial pearls, but depending on the style that you choose, you can lay any decorative cord or ribbon.

How to sew toy soft furniture - a bed for dolls, with their own hands: step8

How to sew toy soft furniture - a bed for dolls, with their own hands: step 9

We also place cabochons, buttons, rhinestones or whatever your imagination will come across.

How to sew toy soft furniture - a bed for dolls, with their own hands: step10

The headboard is ready, so we put it off and proceed to the bed. We calculate the length and width of the crib, we have a sponge 8 * 11 cm. Using this sponge, we cut the sintepon, and also add rectangles on all sides to close the sides. In order for you to understand how to cut it, look at the photo below.

Now put the cut out sintepon on the fabric and with a gap of 1 cm we cut out the fabric. Temporarily it is postponed. We fold and weighed around the foam rubber sinteponovuyu quilts.

If you have not cut out the fabric, cut and tighten the crib as in the photo.

Corners are staked on a typewriter so that they tightly and tightly wrapped the bed.

Now after the cover is well stretched to the crib - we take the cloth from all sides with hot glue or if there is no moment.

Also paste 4 legs-covers, if desired, they can also be covered with a cloth, but in fact they are still not visible.

From satin ribbon we sew a frill( also it is possible to take guipure or rep).You can pick it up or flush it with folds.

We glue the head of the bed with hot glue to the main part of the bed and press it hard so that there is no space between the bed and the headboard. It remains to glue our ruches to the bottom of the cot cover, and around the headboard.

We decided that the decor was not enough and glued an extra delicate ribbon. It seems to us that it became even dearer!

Added two pillows: they are sewn elementary, filled with ball holofayberom or several layers of fine sintepon.

Video: The Cradle. Miniature for dolls with their own hands

How to sew a doll's soft sofa with your own hands from improvised materials: templates, stencils, photos

First we will show how to "sew" a sofa made of eco-leather and pressed cardboard. To begin with, we make the basis of the sofa: we glue together several layers of cardboard( we have thick cardboard, so three layers are sufficient), we also glue it to the back and sides.

Throughout the inside, we glue a thin layer of foam rubber as in the photo and go to the closet of the sofa.

Calculate the height of the length of the material: the height of the sofa plus the back of the sofa and leave the tolerance of 1 cm on each side. Now the length of the segment: the perimeter from the back of the seat with the sides of the sofa in a circle to the second joint. Now we mark the middle on the material and on the back of the couch, apply the glue moment over the entire material, connect the two centers and stretch first in one side of the sofa, then in the other. We connect as in the photo.

Also, underneath our sofa we glue the strip in such a way that it does not remain to see foam rubber and cardboard.

Now we need to make 6 identical pillows for the inside of the sofa. To do this, we need to measure the inside of the sofa and divide it into three. The height of the pillows is equal to the depth of the sofa. We take one layer of cardboard, if it is thick or several layers, if it is thin we cut out necessary squares, on one side we lay a layer of thin foam for visual "softness" and we tighten it as on the photo with eco-leather. We fix the tips with hot glue or moment.

We glue the pads to the sofa, for the beauty we can additionally make a few small cushion pads. Our sofa is ready!

And another version of the sofa for the country house favorite doll. For work, we will need materials that will be available to any needlewoman! Cut out the backboard template from a thick cardboard( 3 mm and wider) or thin plywood.

Duplicate the same pattern on foam rubber. We connect it with a rigid base with hot glue.

Tighten with a cloth, fix the thread and additionally with hot glue.

We take nine identical small buttons, tighten them, plan on the basis of a dream for the screed( as in the photo) and sewn on the stretch to create a beautiful relief on the front side.

How to sew a doll's soft sofa with your own hands from improvised materials: Step 5

Now we need a skeleton of beams or plywood thatthere are at home. Collect an even rectangle and cover the front side with a cloth like in the photo. Fix it with hot glue.

Overlay a sheet of plywood or thick cardboard and glue in two layers of foam so that the sofa at us seemed soft and cozy.

How to sew a doll's soft sofa with your own hands from the materials at hand: Step 9

Now make the armrests as in the photo. If you have a tight cardboard, then you can paste a layer by layer and get the same armrests of the same strength.

We tighten it like a foam on the photo. On the top we cover with a cloth. We connect all parts of the sofa to hot glue, if necessary, fix the back of the sofa with screws to the base.

On top decorate the decorative cordrum and decor to taste. The sofa is ready!

How to sew a doll's soft armchair with your own hands from improvised materials: templates, stencils, photos

To make a delightful chair we will need:

Several types of cardboard: foam card, thin and thick1.5 mm);
Wooden pin or plastic tube of the same diameter;
Fleece or thin foam;
Cloth fabric;
PVA and / or hot glue;

According to the drawing below, we cut out all necessary details. In order to understand what size you want to make a chair in the drawing there is a note in 1 inch( 2.54 centimeters).

We connect the penokaron and glue it on top with thick cardboard as in the photo. Before moving on to the next step, the whole chair must be pasted with thick cardboard and dried for at least 6 hours.

Now we paste the foam over the back, seat and armrests.

We go to the cover, as in the photo. For each part of their fabric, we glue a thin cardboard for stiffness. Do not forget the need for step-by-step as in the photo, so you do not have to peel off pieces of cloth at the joints.

Now go to the back of the chair. On the foam board, we glue hard cardboard, and foam rubber on top of it. The last layer is covered with a cloth.

How to sew a doll's soft armchair with your own hands from improvised materials: step6

Attach the back to the mainAsti chairs. At the top of the backrest, we also lay out a cardboard with a hose made of cloth, so that the chair looks neat from all sides.

There was a pillow and it is the simplest in this master class. Simply repeat the sequence on the photo and at the end fix glue the pillow on the chair.

And just a little bit: close the bottom with a two-sided fabric decor. Previously, we did not cut it, because its height is selected individually.

Tough work is done - the chair is ready!

How to sew a doll's soft ottoman with your own hands from the materials at hand: templates, stencils, photos

And now we will make not just an ottoman for a doll, but a real masterpiece!

We take plastic decor elements and saw off several ends of the same height - the legs of our puff.

Now take a round base, it can even be a reel from a big scotch, but we have a perfume lid.

We insert the wire - it will fix the doll on the puff afterwards.

At the top of the bed are two layers of foam rubber or one layer, but thick, we did not have one.

Now we turn to the elements. A few zashkurivaem elements to give texture.

And cover with brown paint, if desired, over varnish.

Cover the base with a velvet cloth and make a screed with glue.

Now we glue the decorative tape to decorate the pouf and at the same time hide the shortcomings of the screed.

Meanwhile, the elements have dried up and they can be treated with acrylic gold paint.

You can also decorate with gold foil. It is done simply: we put a varnish and on top of it we carefully press a foil, we wait 20 minutes and sharply tear off. Done!

We glue to the base of the leg( since we have a beautiful black base-cover, we do not cover it with a decorative cloth, but leave itto gleam).And our ottoman for cats' dolls!