Than to finish a ceiling in a bathroom? How to install a ceiling in the bathroom of plastic panels, foam polystyrene plates, plasterboard, glass sheet yourself?

Similar instructions for those who do not yet know how to trim the ceiling in the bathroom.

The bathroom is the place where we most often go in order to relieve fatigue after a hard day's work. Probably, it will be difficult to find a person who would not agree that a bath filled with warm water and fragrant foam literally in a matter of minutes, restores the body to moral and physical strength.

But in order for a person to receive positive emotions from visiting a bathroom it is of fundamental importance that it has a perfect finish, not only the floor and walls, but also the ceiling.

It is very important that it is beautiful and that it is importantly properly trimmed. After all, as the baths in our apartments are not very large, then the well-groomed cracked and moldy ceiling will very much put pressure on the psyche and prevent a person from relaxing.

Finishing the ceilings in the bathroom: what materials should be excluded

Lime is not suitable for finishing the ceilings in the bathroom

The bathroom room is the wettest room in the apartment, so it is extremely important that the material with which the ceiling is finished can easily cope with a large amount of fumes.

In addition, the walls and ceiling are constantly subject to sharp temperature changes. All this leads to the fact that the decorative coating faster than the usual loses its protective and visual qualities.

In view of all of the above, it can be concluded that there are materials that are best not to be used for finishing the ceiling in the bathroom.

So:

1. Lime. Very badly brings increased humidity and literally a couple of months after the application is covered with ugly yellow spots and cracks
2. Chalk. Is an ideal breeding ground for fungus and mold. In addition, this finish requires a fairly frequent renovation of the
3. oil paint. Also very quickly lost its decorative properties. This ceiling will please you no more than three months, and then cracked and will begin to crumble
4. Wallpaper. This type of finish categorically does not tolerate high humidity, therefore, even if you buy the highest quality and expensive material, it will still fall off very quickly
5. Plasterboard and chipboard. These materials absorb moisture very well, and this leads to the fact that they deform and become a hotbed of harmful fungi

Modern finishing materials

Film for stretch ceilings

• If our mothers and grandmothers had no choice and they had to trim the ceiling with impractical materials such aslime and oil paint, then we can afford to make from the bathroom a completely safe and visually attractive room

• Now in the building stores can be found quite a lot aboutdelochnyh materials that meet all the requirements of modern man. It calmly peretosyat moisture, not afraid of high and low temperatures, and importantly, have antibacterial coating that prevents the appearance of fungus and mold

• Still, however modern materials are good and qualitative, you still need to take into account some nuances of the finish, because if in your room, for example, very low ceilings, then you will hardly be able to install a hinged or rack-mount system

• Since for their installationrequires a special frame, it will reduce the height of the room even more. Therefore, go to the store for purchase, consider not only your preferences and financial situation, but the dimensions and height of the room in which you will make repairs.

Ceiling Finish Materials:

1. Stretch and suspended ceilings
2. Styrofoam boards
3. Glass sheets
4. Rack andcassette ceilings
5. Water-dispersion and latex paint

How to paint the ceiling in the bathroom with water-dispersion or latex paint?

How to paint the ceiling correctly

If you are a little cramped in the means and you do not have money to install the suspension system, then you can paint the ceiling with paint. Just use for finishing not oil and enamel, but more quality and modern means. Latex and water dispersion paint is ideal for finishing the bathroom ceiling.

Both types of these paint and varnish coatings contain additives that reduce the negative impact of moisture on them and prevent reproduction of pathogenic fungi.

Paint application rules:

• Carefully remove the old coating from the ceiling and always perform anti-mold surface treatment. For these purposes, you can use special purchased products or simply prepare a concentrated solution of water and acetic acid

• . After the ceiling dries, seal all small cracks and pits that are on it, and if necessary, see the alignment of the surface. This can be done with ordinary

• putty. When the putty completely dries the ceiling it will be necessary to sand it( this will help to remove the remaining irregularities) and then treat it with a special

• primer. Once the primer has completely dried, you can take the paint and apply it to the ceiling with an ordinary brush or roller. After 2-3 hours, apply one more layer of paint, only this time make strokes strictly perpendicular to the previous ones. Such a small trick will help you to make the color of the ceiling perfectly smooth.

How to finish the bathroom ceiling: EPS boards

Ceilings made of expanded polystyrene: the main steps of the

The EPS boards are another inexpensive and visually appealing material that can transform the bathroom quickly enough. The only thing that you have to consider is that you need to glue them on a perfectly flat surface.

Therefore, before proceeding directly to the decoration of the coating, make sure that the ceiling surface is properly leveled. If you decide to save at this stage of work, the end result will not please you either by its appearance or longevity.

So:

• Take the tile and apply special glue on it. It should be applied both in the center of the tile, and throughout its perimeter. For greater strength, you can make a few strokes along the diagonal.

• The first tile must be glued to the center of the ceiling. It is necessary to do this as accurately as possible and smoothly. If at least you do not guess a bit with its placement, then all subsequent tiles will not be mounted correctly.

• Finishing material should be gently pressed to the surface of the ceiling and hold it in this position for literally a couple of seconds. During this time, the glue will have time to grab a little and you can proceed with the placement of the next tile. If there is glue on the surface of the finishing material, then it must be removed as quickly as possible. In case you leave it there for at least half an hour, it will be impossible to do it

• All subsequent tiles are glued to the ceiling parallel to the first. Place them in such a way that there are no large gaps between them. Also take into account the fact that this material can not be very strongly pressed. If you exert a very strong mechanical effect on it, there will be dents that can not be removed.

The method of finishing the ceiling in the bathroom: LSU( glass sheet)

Decorated ceiling panels based on the ASL

The glass sheet is an ideal means for finishing the ceiling spaceIn bathroom. Due to the fact that this material has a sufficiently flexible structure, it can easily take the desired form and that it is important to hide all the minor shortcomings of the old coating. It is installed almost the same way as plasterboard ceilings, except that with some nuances in mind.

• So:
  • Before starting to mount the LSU, it is absolutely necessary to carry out anti-molding treatment of all surfaces in the bathroom and be sure to thoroughly dry it
  • . During fixing the sheets, make sure that there is always a gap between them equal to half the thickness of the glass sheet
  • . If you need to cut a sheet of a certainsize, then put LSU on the wooden surface with a smooth side up, make incisions with a sharp knife, and then gently pushing, break off the desired piece of
  • BeforeFinally fix the sheet with screws to drill a hole. This will help to hide the screws of self-tapping screws inside the finishing material and in the end you will get a surface on which you can finish the finish without additional alignment.

  Steklmagnesium sheet Technical data Application

  Magnesium-glass sheets( ASL)

  Magnesium-glass sheets can be used not only for finishing the ceiling in the bathroom. This material can easily be used in other construction works. With its help you can carry out leveling of walls, build partitions, make arches and niches in walls. So if you want to transform your bathroom quickly and inexpensively, then the glass sheets are what you need.

  The most pleasant thing is that this material is inferior to such advertised in our country moisture resistant drywall. LSU has a much better density and practically does not swell when water gets on it. Also, glass-magnesium sheets have very good heat conductivity. Therefore, this material is not afraid of temperature changes, which means that it will please you with its perfect look for a longer time.

  • Advantages of LSU:
    • Good sound insulation properties
    • No cracking during installation on the sheets
    • Not afraid of minus temperatures
    • Has a small enough weight
    • Easy and fast installation

    Rack and cassette ceilings in the bathroom with your own hands

    Suspended white rack ceiling with chrome platedintervals

    Rack and cassette ceilings are simply mounted, so even a novice builder can easily cope with this task. This material is used most often by people to decorate the ceiling space in the bathroom.

    Such universals became so popular. They are very durable, environmentally friendly and look equally good in rooms of any size.

    Installing the rack ceiling:

    • In the first step, install the rails. They need to be fixed around the perimeter of the room. If you are not quite sure that you will be able to place them correctly, then use the
    • laser level. When the guides are installed, start mounting the hangers. Mount them best with screws and dowels in pre-drilled holes. Periodically check whether the suspensions are positioned according to the
    • level. In the next step, proceed to installing the carrier tires. It should be placed at a distance of 90 cm apart from each other
    • Next, free the slats from the protective film, cut them into pieces of the correct size, carefully slide them into the guides and snap onto the traverse. Continue installing the slats until the whole surface of the ceiling is covered.

    Suspended and suspended ceilings for the bathroom

    Suspended ceilings in the bathroom

    The stretch ceiling is a certain type of construction, consisting of a strong frame and a fabric made of PVC.The main advantage of this finish is its water resistance. Even if the couple in the bathroom is a lot, he will not be able to penetrate inside the ceiling cloths.

    So the material from which the suspended ceiling is impregnated with a special water-repellent substance, the water will simply be collected in large drops. After hygienic procedures it will be enough to wipe the ceiling surface with a clean dry rag and it will look perfect again.

    Rules for installing a stretch ceiling:

    • First of all, determine the exact location of the baguette. To do this, make a small indent from the main ceiling. Depending on the type of tensioning cloth, it can vary from 1.5 to 5 centimeters.
    • Then, using a laser level, we apply to the ceiling surface of the line and begin to attach a baguette to them. Fix them with self-tapping in steps of 15-20 centimeters
    • . At this stage, you also need to lay the wiring and make the outputs for all fixtures that will be installed in the bathroom.
    • When this is done, spread out the tension web in the center of the room and fix it with a special clipit in any angle convenient for you
    • The same way we fix the other ends, we turn on the heat gun and start warming up the tension web. When it heats up to 40 degrees, carefully insert it into the
    • moldings. After the fabric has been securely fixed, the ceiling skirting board closes the baguette installation places and proceed to the installation of the

    lighting. The ceiling in the bathroom is made of

    plastic panels. The design of the ceiling in the bathroom is made of plastic panels.

    . The plastic panels are goodso that after installation they will not require any special attention. All you need to do this once a week, wash their surface with any soapy solution.

    But the most pleasant is that for their installation you do not have to conduct any waterproofing work. Since the plastic panels are hermetically sealed, they will not leak moisture into the interior, which means that you can forget about mold and mold in this case.

    Rules for the installation of plastic panels:

    • We make the markings on the old ceiling and use the level to install a wooden frame.
    • In order to make the frame more rigid, we strengthen it with additional slats. They should be fixed at a distance of 1 meter from each other.
    • . In the next step we take not very long dowels and fixes them to the frame with plastic guides
    • . We measure the distance from one wall to another, cut off the bale and slightly bend it by inserting it into the guides. Do not forget to fix each panel with special steel staples
    • The rest of the pasture is attached in the same way pressing it against the previous

    Gypsum plasterboard ceiling in the bathroom with your own hands

    Gypsum plasterboard ceiling with lighting

    The gypsum plasterboard ceiling for our strange is no longer a novelty. Its practicality, economy and versatility have made it the most popular medium of inexpensive and high-quality finishing materials. But since you plan to repair the bathroom, it is worth considering that in this case you will not be suitable for ordinary drywall.

    In areas with high humidity, the finish should be carried out with a moisture resistant material. So do not try to save money and immediately buy a drywall that will easily transfer the constant effect of moist air.

    Mounting recommendations:

    • Determine at what level the plasterboard ceiling will be mounted( you can do it with a laser) and mark the exact fixation points for the
    • Next, we begin to mount the metal frame. First set the profile around the perimeter of the room, and then go to reinforce the resulting structure. All the steel parts must be securely fastened to the
    • self-tapping sheet. Cut the sheets of gypsum board into pieces of the correct size and fasten them to the
    • steel frame with a screwdriver. When the entire surface of the main ceiling is covered with sheets, you can proceed to the filling of the seams and self-tapping screws. Wait until the mass dries, and then grind and primer
    • At the final stage, the top coat of

    is applied to the plasterboard ceiling in several layers. Mirror ceiling in the bathroom with your own hands

    Mirror ceiling in the bathroom

    If you are not shy in finance and are ready to tinker a bit,then make in your bathroom a mirror ceiling. Such at first glance, a simple finish will greatly transform the smallest and darkest room. This original ceiling coating will definitely help to make the bathroom visually higher and bigger.

    And if earlier in specialized stores you could buy only a mirror stretch ceiling, now there are even more interesting and beautiful variations of this finish.

    So:

    1. Coverage from fittings. On a prefabricated frame, non-standard size plates are attached. This form of mirrors allows you to maximize the volume of the room
    2. Ceiling Amstrong. This trim is mounted on the basis of the T-frame, cross-section profiles and hangers that support them. In this case, the mirrors are inserted into the formed cells of the
    3. Ceiling with a facet. This type of mirror coating also provides for the installation of a sturdy frame, but unlike the previous method, tiles to it will be fastened with a special adhesive

    Cheap ceiling in the bathroom with your own hands

    The original glass ceiling in the bathroom

    Another good option for finishing the ceiling spacein the bathroom is a glass ceiling. This material is definitely not afraid of moisture, sudden temperature changes and frequent processing of household chemicals.

    Moreover, this decoration will please you with a beautiful aesthetic appearance. If you want, you can mount interesting lighting for it or order a real stained glass window.

    How to install a glass ceiling:

    • First of all, make the framework of the
    • around the perimeter of the bathroom. Then, from the color contrasting racks, mount the cells into which the
    • glass will be inserted. Then carefully insert the glass of the desired size into the cell and attach it with a special screw or narrow
    • strip.the same spirit until all the empty cells are covered with glass

    Video: Plastic for finishing the ceiling of the bathroom and kitchen. Secrets of plastic choice