Knitting knitting gloves for beginners: a simple way. How to knit fingers on gloves on spokes?

click fraud protection

Basics of needlework: knitted gloves for beginners.

Contents

  • How is the glove size determined for knitting?
  • How to knit gloves with knitting needles for beginners: an easy way?
  • How to knit fingers on gloves with knitting needles?
  • How to knit gloves without fingers with knitting needles for beginners?
  • Video: Knitting needles
  • How to knit children's gloves with knitting needles for beginners?
  • Video: Children's mitts
  • Video: Gloves. Knitting on knitting needles

In cold winter cold, wet autumn or summer coolness will come as it is impossible, by the way knitted gloves. You can buy them, of course, in the store.
But do not compare the amazing feeling of warmth and comfort from a thing tied up with your own hands and acquired somewhere.
Therefore, to get the first skills of needlework for making this necessary accessory will be very useful.

How is the glove size determined for knitting?


Gloves can be knitted in many ways.

instagram viewer

The most popular is - work with the help of spokes.
This process is laborious, but it is not difficult to learn at all.
This requires only: patience and knowledge of the of some principles.

  • To gloves beautifully clasped hands it is best to knit their with fine wool on thin knitting needles.
  • We knit the product a little already with the circumference of the wrist and arm.
  • Pre-do measurements and counting loops, so that the finished product fits exactly in size.
  • Good help in this will serve as an article published on our website.

How to knit gloves with knitting needles for beginners: an easy way?

After calculating the required number of loops( further n.), we proceed to work.

  • In our example we type 52 workpieces
  • We knit, beginning with the cuff. Choose the standard length 6-7 cm
  • Collected items distribute for 4 spokes for 13 pieces
number the working needles
correctly form the fingers
  • Close the circle with the remaining tail of the yarn from the set of
  • The same tip together with the main thread knit 5-6 p.
  • All the work is done clockwise , using the gum method - one st. Front, the other is purl.
  • After making 4 circles of dark yarn , separate the strip from of a light thread of 4 rows.
  • Repeat this approach again.
  • Let's move on to the work of the with the thumb of the product.
  • To unscrew the right hand finger, start with the appendix at the beginning of the first knitting needle.
  • Next, we sew the front one, after it wrap the
  • Z of the row knit without adding
  • 4th row of start with the cake, we knit three items, the cake
  • Then, after each three circles and make the increase by tying between the crochets: 1, 3,5,7,9,11,13 p.
  • The length of the wedge should be about 6 cm
wedge for the big finger
  • We remove 13 pcs, dividing into two pins of 6 and 7 pcs.
  • We dial on 6 additional knots
we knit gloves with knitting needles
  • We knit the whole series
  • With the next circle we connect by 2 points on both sides of hole , to the remainder of the wedge of one point and the formation on the first spindle 13 p
standard canvas
  • We make the work before the beginning of the little finger- 3-4 rows
  • We distribute for the fingers p.:
13 pinky
13 little finger
11 anonymous
13 average
15 indicative
  • Next we make 3 airy between each finger
  • We draw this diagrammatically and continue working on the
scheme working diagram
  • We send the of the 2nd needle to the pins designated for the little finger,these 6 pcs for one pin, and 7 pcs from the 3rd spoke to the other.
  • Then we make 3 air nets on the 2nd spokes of
  • . We fasten the item on the 3rd spoke.
  • Using the scheme, , we move the pins to the pins:
Pinky, medium 6 - from the palm side and 7 - from the back side
Nameless taking into account 3 pcs jumper - 7 pieces each
Indicative 7 - from the palm sideand 8 - on the back side we leave the

finger distribution rules on the

knuckles. The index finger:
  • We knit the 4 p. on the spindle No. 1
  • With the additional knitting we tie the last from the knitting needle No. 1 and make the air knife
  • Additionalwe make a spoke two air pads and we sew 3 pcs from the No. 4 needle
  • We get 4 pcs on the spokes 1, 2, and 5 pcs. - No. 3, 4. Total: 18 p.
knit gloves
  • We continue knittingto the nail and we begin closing the finger : at the beginning and the end of the spokes we combine two stitches, tying together.
  • The remaining two items pull the thread and stretch it inside out.
last stage

Middle finger:

  • He is assigned 19 p. ( 13 p. With pins + 3 pcs with 2 jumpers).
  • P. with pins, defined for the formation of the middle finger is moved to two spokes.
  • The spoke facing the palm is symbolically called first.
  • Attach the thread from the skein and knot the 4 st from the knuckle No. 1
  • Then with the additional knitting we knit the 2 the remaining stitches from the first knitting needle and we make 3 air jets forming the jumper
  • Next, with the new knitting needle 5 sts from the knuckle No. 2
  • With the additional needle, we bind the 2 n. With the needle number 2 and we get the from the space between the first finger 3 pcs.
  • . We get: one spoke - 4 p., three - at 5 pcs.
  • . We repeat the operation in the same way as the first part

Unnamed finger:

  • P. locatedWe remove the needles
  • on the pins. , then taking the extra knitting needle - the extreme 3 pts from the first knitting needle, and 1 st - with the second
  • . With the additional knitting needle we make 4 st from the 2nd knitting needle
  • Next we knit the last 2 n. From the 2nd needle and 3 points. is added from the connection with the middle finger.
  • Now they are arranged like this: on three spokes, four pieces each, and on one - five.
  • We continue to work like the fingers
    described above. The little finger
  • P. is placed as well as for the previous finger: by 4 points, proceeding from the fact that 3 piles out of the connection with this finger.
  • All the rest of the work we repeat like the previous

. The big, finishing finger:

  • On the spindle on the right, we sew 5 pcs., with the additional needle we knit with the last pivot of the same knitting needle, and four - with the left knitting needle.
  • Adding one more needle from the left knitting knit the last 3 of the , and 2 points from the top of the
  • hole. Then we get an additional 5 from the same
  • Total on 4 needles we have 20p.: by5 on each.
  • We repeat the work, on the same principle as for the previous fingers.

The left glove is made like the right one.

finished product

How to knit fingers on gloves with knitting needles?

It is convenient to take the first steps in learning from children's copies.

  • For the width of the wrist thirteen cm , take at 6 pts per finger , except for the large one.
  • We sequentially separate the details:
  • We move the two points on three working needles and we work the front one circle.
  • In the 2nd circle, we increase the number of items by a factor of two( unscrambling from one pc-two front) .
  • We knit the necessary finger length: the little finger - 0,4 cm ;anonymous, index, average - according to 0.5 cm
  • Then toss all the items, excluding the miser, on a free thread or pins .
  • We cut the thread, we sew up our fingers.
  • After assembling the parts, distribute them to and four needles, alternately
  • Next we proceed to work with the facial smoothness for creating the little finger, the extreme 2 pcs connect.
  • After this, the first two nuts of an unnamed finger are connected
  • To the big finger, we continue to work in a circular one, which is formed on three free needles, distributing the on them with six pcs.
  • . By increasing we bring them to about twelve.
  • We transfer to 0.30 cm
  • Then, twice, through the circle, we add on the 1st pt from both parts of the finger.
  • The finished finger of is attached to the product web, closing the work by decreasing at the base and at the edge of all parts of the finger.
  • Then, on the parts of this finger, we combine to 2 pcs from two edges.
  • After the circle of the , at the beginning of the row of the thumb we combine the initial point with the final one on the one side of the work, from the opposite part - the last point of this finger is knitted, combining with the upper
  • . Similarly, we reduce to the original the number of the item, which was before attaching the parts.
  • Subsequently, an elastic band is formed.
simple version of

How to knit gloves without fingers with knitting needles for beginners?

simple, but presentable clothes for hands

An original and stylish accessory is available to create by hand even the most inexperienced needlewoman.

Prepared:

  • Alpaca wool - 3 rolls of 50g dark gray
  • Knitting needles No. 3

Work

  • Starting with a set of 82 pcs.
  • We apply one series of inlays.
  • Next, we knit with an elastic band - 2 reps.and 2 persons.
  • After 20 cm add before and after edge to 1 st
  • Repeat in every 8th row. These loops are included in the drawing.
  • Having reached the work length of 50 cm, the hinges are closed.
  • Stitched products, leaving in each of the two parts an opening for the passage of a finger about 5.5 cm away from the lower end of the gloves 6 cm.

Video: Mitneys with needles

How to tie children's gloves with knitting needles for beginners?

Video: Children's mitts

  • There are many options for making knitted gloves even for beginner needlewomen.
  • We offered only some of them.
  • To fix the result, you can see a practical video lesson.

Video: Gloves. Knitting on needles

  • May 27, 2018
  • 60
  • 360
Med advice
  • Symptoms
  • Medicine
  • Blanks For The Winter
  • Innings
  • Cooking
  • Storage
  • Choice, Cooking
  • Diet For Weight Loss
  • Therapeutic Diets
  • Nutrition And Health
  • Nutrition Rules
  • Eye Drops
    • Privacy

    © 2024 Med advice. All rights reserved