Implants Semados - a choice dictated by quality and time

To date, dental implantation is considered the most optimal way to restore a damaged tooth that was removed with the root.

Semados implants are the newest dental product developed by specialists from Germany. They are intended for implantation into bone dental tissue and are an analogue of the root, to which the crown( upper part of the tooth) is then fastened.

Design and technological features of

The production and further use of Bego Semados implantation systems was preceded by a complete analysis of the basic characteristics of implants of other manufacturers.

That's why at the moment, Semados implants have some of the most innovative characteristics among their direct competitors: the

• is made of high-quality titanium;
• are processed by special technology, which increases the area of ​​contact of the implant with bone tissue;
instagram viewer
• due to the variety of products, it is possible to select the necessary design for each case;
• combines two forms( parallel and tapered), which allows tight fitting of the design, avoiding the appearance of gaps between the implant and dental tissues;
• is securely and precisely attached to the abutment, thanks to the connection form( hexagon with internal thread), excluding rotation;
• rods have micro-grooves, which helps reduce the tension of bone tissue, shortens the duration of engraftment.

The design is characterized by a narrow polished neck, which contributes to a better and painless adaptation of soft tissues when installing the rods. The surface of all implants is ultra-pure and homogeneous( the fourth degree of titanium purification).This eliminates the risk of product rejection.

Linear series

Semados implantation system includes several types of products that are intended for various clinical cases. They are divided into:

1. Semados S( station wagon) .Reliable implants for classical prosthetics. They have a conical shape in combination with a parallel( like a cylinder), which allows to evenly distribute the load on bone tissue. Thread self-tapping, providing optimum compression.
2. Semados RI .Applied in poor state of hard dental tissue, when the maximum stability of the construction is required. Used in a single-stage installation. Thanks to a special thread, which has the most acceptable angle, there is a strong fixation.
3. Semados Mini .They are installed on narrow jaws or with full prosthetics when beam systems are used.

Neck implants are created with a platform switching function for different situations. The variety of designs allows them to be used in prosthetics of any complexity.

Advantages of German products

All products are manufactured using the most advanced technologies. Meets high quality requirements. Semados implants have undeniable advantages:

• is a conical shape, due to which the thread is reduced to the cervical region, which determines an excellent primary stability in any bone tissue;
• rounded base, which allows the most accurate and durable fixing of the product in the appropriate position;
• internal self-tapping thread, ensuring optimal connection with the prosthesis;
• surface is treated by special techniques that significantly increase the life of the implant and ensure sterility;
• titanium, from which all products are manufactured, excludes the appearance of allergic reactions and significantly reduces the possibility of rejection;
• implants provide the installation of a functional and aesthetic top crown.

The use of Semados systems ensures full reliability of the prosthesis with lateral loads, prolonging the service life for a long time.

The products are well established in the bone tissue of the restored tooth, without changing their shape over time. They greatly facilitate the further hygiene of the oral cavity.

Installation process

Preparing the implants is carried out before the installation of the implants, which provides for classical procedures for the diagnosis, treatment and preparation of bone tissue.

Implant implantation can be performed on several protocols, which provide the following actions:

• cut and flake the gum to open access to the bone;
• with the help of drilling create a cavity for the installation of the product, for this use a three-edged drill with a special marking corresponding to the length of the implant;
• open a package containing an instruction and a label indicating the dimensions of the product, open the secondary packaging and lay it on a sterile surface;
• remove the cork, holding it vertically, fix the portable key on the adapter insert, remove the sterile packaging;
• transfer the product to the site of installation, it is not possible that the implant is in contact with saliva, mucous surface, with other instruments;
• the place where the construction is inserted, is disinfected;
• the rod is started to screw in after the blood appears in the prepared bed, using a torque wrench or a corner tip, it is necessary to monitor the cooling;
• screwing is stopped when the torque is higher than normal( primary stability is achieved), do not screw the implant until it stops;
• remove the fixing screw and the adapter insert;
• gum is sutured without tension, using a specially selected seam technique;
• the incision is covered completely, the sutures are removed after 8-10 days;
• rod is left for several months for implantation and fusion with bone, exposure of the implant is carried out according to the indications of the X-ray;
• screw the healing screw for the final formation of the gum.

The entire procedure is performed with the use of anesthesia and is painless for the patient.

Semados systems, thanks to the self-tapping thread, allow the installation to be carried out in a minimally invasive manner. The tissues are pierced without a cut, and then the structure is screwed into the bone. At the time of implantation, the bone tissue tightly surrounds the implant, which ensures its stability.

Price issue

Titanium products can cost up to 20 thousand rubles, including installation. It is not cheap. But do not forget that the guarantee for these implants is almost lifelong.

A manufacturing of implants is a high-tech process, which involves various stages: from computer design of the model to the creation of individual packaging.